IME ADEUNIS TEMP V4 IP68 Sigfox RC1 Operation & User’s Manual

File Specifications

Brand: IME
Category: Measuring Instruments
Model: ADEUNIS TEMP V4 IP68 Sigfox RC1 (Operation & User’s Manual), pri.4ZMc2OpC6
File Info: Adobe Acrobat PDF (DjVu)
File Size:
Pages: 57 pages

Download PDF

Download IME ADEUNIS TEMP V4 IP68 Sigfox RC1 Manual (57 pages)

Read Online:

Read the IME ADEUNIS TEMP V4 IP68 Sigfox RC1 Operation & User’s Manual online using the built-in PDF viewer. This document explains how to operate the device, adjust settings and perform regular maintenance.

Key Pages of Document

TEMP V4 IP68 Sigfox RC1 - Guide utilisateur / User guide version V3.1.1

25 of 57 FR 2.2.4 Transmission sur dépassement de seuil avec répétition de l’alarme Le produit permet la détection de dépassement de seuil (haut et bas) pour chaque sonde et de répéter cette alarme selon une période détermi- Produit en veille Envoi trame 0x58* Non Mesure température sonde 1 et 2 Oui Période de scrutation atteinte ? Alarme acti- vée car seuil dépassé ? Non Répétition alarme activée ? Non Répétition trame 0x58 toute les S321XS322 Envoi trame 0x58* Retour à la normal ? Non Oui Oui ...

TEMP V4 IP68 Sigfox RC1 - Guide utilisateur / User guide version V3.1.1

35 of 57 FR INTRODUCTION All rights to this manual are the exclusive property of adeunis®. All rights reserved. Copying this manual (wit- hout written permission from the owner) via printing, copying, recording or by any other means, translating this manual (in full or partially) into any other language, including all programming languages, using any electrical, mechanical, magnetic or optical devices, manually or any by other methods, is prohibited. adeunis® reserves the right to change the technical specifi cations ...

TEMP V4 IP68 Sigfox RC1 - Guide utilisateur / User guide version V3.1.1

53 of 57 FR S300 Decimal 8640 The keep alive frame is sent every: 8640x10 seconds =1440min so 24h (so once per day) 2.3. Operation of the LED Mode Red LED state Green LED state Product in Park mode OFF OFF Magnet detection process OFF ON from detection of the magnet during 5 seconds Product start (after detection of the magnet) OFF Rapid flashing 6 cycles, 100 ms ON / 100 ms OFF Detection of the correct wiring of the probes at startup 10 seconds ON if a default is detected 10 seconds ON if no default is detected Switch ...

TEMP V4 IP68 Sigfox RC1 - Guide utilisateur / User guide version V3.1.1

35 of 57 FR INTRODUCTION All rights to this manual are the exclusive property of adeunis®. All rights reserved. Copying this manual (wit- hout written permission from the owner) via printing, copying, recording or by any other means, translating this manual (in full or partially) into any other language, including all programming languages, using any electrical, mechanical, magnetic or optical devices, manually or any by other methods, is prohibited. adeunis® reserves the right to change the technical specifi cations ...

TEMP V4 IP68 Sigfox RC1 - Guide utilisateur / User guide version V3.1.1

13 of 57 FR 1.1. Description générale 1.2. Encombrement Port USB pour configuration produit Module RF Protocole Sigfox RC1 Antenne interne Batterie interne 1.3. Deux versions de produits 1.4. Carte électronique Bornier pour alimentation externe 132 62 62 34 5V + - 1 2 3 4 www.ime.de ...

TEMP V4 IP68 Sigfox RC1 - Guide utilisateur / User guide version V3.1.1

35 of 57 FR INTRODUCTION All rights to this manual are the exclusive property of adeunis®. All rights reserved. Copying this manual (wit- hout written permission from the owner) via printing, copying, recording or by any other means, translating this manual (in full or partially) into any other language, including all programming languages, using any electrical, mechanical, magnetic or optical devices, manually or any by other methods, is prohibited. adeunis® reserves the right to change the technical specifi cations ...

TEMP V4 IP68 Sigfox RC1 - Guide utilisateur / User guide version V3.1.1

22 of 57 FR 2.2.2 Transmission périodique avec redondance Le produit permet également de rajouter de la redondance dans l’envoi des données de température (cf schéma ci-dessous). Grâce à l’activation de la redondance le produit conservera un certains nombres d’échantillons en mémoire locale pour les envoyer ensuite dans la trame suivante. Les paramètres associés à ce mode de fonctionnement sont : • La période de scrutation (registre 321), la fréquence de sauvegarde (registre 320) et la fréquence d ...

IME ADEUNIS TEMP V4 IP68 Sigfox RC1 user guide recommended for: Siretta SNYPER-LTEM, Nemo D4-Dc, Nemo 96HDL, Conto D4-Sh, Conto D4 -Pd.

⚠️ Download Safety

The Measuring Instruments Operation & user’s manual (57 pages) is completely safe to download (last scan date: 23/01/2026).

Related PDF Instructions for IME ADEUNIS TEMP V4 IP68 Sigfox RC1:

Measuring Instruments Equipment: Frequently Requested

Have some Questions about IME ADEUNIS TEMP V4 IP68 Sigfox RC1 Device?

Get valuable and actionable advices from other IME ADEUNIS TEMP V4 IP68 Sigfox RC1 device users. Describe your problem or question, regarding the using of ADEUNIS TEMP V4 IP68 Sigfox RC1, in as much detail as possible, and other users will be able to answer you.