HAMPTON BAY CARROLTON II AM215-ORB Use And Care Manual

Table of Contents .......................................................... Safety Information ......................................................... Warranty ......................................................................... Pre-Installation .............................................................. Tools Required ......................................................................... Hardware Included .................................................................. Package Contents ................................................................... Dual ...

call Hampton Bay Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use. AM215ORB001-A ...

1 2 3 Assembling the fan Preparing the motor Preparing the canopy □ Remove the canopy ring (B) from the canopy (C). □ Remove the two non-slotted screws (BB) from the canopy (C), and loosen the slotted screws (BB) on the canopy (C). □ Remove the canopy bottom cover (D) from the canopy (C). □ Remove three of the six collar mounting screws with lock washers (FF) (every other one) from the collar on top of the fan motor assembly (F). □ Route the wires exiting from the top of the fan motor assembly (F) through the canopy ring ...

Canopy mounting screw with lock washer (preassembled) Clevis pin (preassembled) Cotter pin (preassembled) Collar setscrews (preassembled) Collar mounting screws with lock washers (preassembled) Blade arm screw with lock washer (preassembled) Light kit mounting screws (preassembled) Nut (preassembled) Glass cap (preassembled) Decorative nut (preassembled) Pull chains and fobs (not to scale) Plastic plug (not to scale) Part Part Description Description 3 4 1 1 2 6 10 3 1 1 1 ...

9 1 Preparing the canopy 2 Preparing the motor □ Remove the canopy ring (B) from the canopy (C). □ Remove the two non-slotted screws (BB) from the canopy (C), and loosen the slotted screws (BB) on the canopy (C). □ Remove the canopy (C) from the mounting bracket (A) by turning the canopy (C) counterclockwise. 3 Assembling the fan □ Route the wires exiting from the top of the fan motor assembly (F) through the canopy ring (B). Ensure the slot openings are on top. □ Route the wires through the canopy (C) and then through the ...

9 1 Preparing the canopy 2 Preparing the motor □ Remove the canopy ring (B) from the canopy (C). □ Remove the two non-slotted screws (BB) from the canopy (C), and loosen the slotted screws (BB) on the canopy (C). □ Remove the canopy (C) from the mounting bracket (A) by turning the canopy (C) counterclockwise. 3 Assembling the fan □ Route the wires exiting from the top of the fan motor assembly (F) through the canopy ring (B). Ensure the slot openings are on top. □ Route the wires through the canopy (C) and then through the ...

include amps and wattage used by the light kit. TOOLS REQUIRED TOOLS REQUIRED Phillips screwdriver Electrical tape Wire stripper Flat blade screwdriver Step ladder We warrant the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a period of li ...