ICPDAS DL-303 Quick Start Manual

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717 Contact us: [email protected] / [email protected] 1 DL-303 Remote CO, CO2, Temperature, Humidity, Dew Point Data Logger Quick Start Guide 1. Introduction The DL-303 Data Logger device is used for recording time-stamped Temperature, Humidity, CO, CO2 and Dew Point information. Data is recordable to up 450,000 records. The DL-303 data logger can be used on iOS mobile devices with its iOS app. Users can have real-time access of data using free Windows software, iOS and Android APPs. It supports DCON, Modbus RTU, Modbus TCP, M2M IoT - Internet of Things, and MQTT protocols and communicates over RS-485 and Ethernet, and can be Powered-over-Ethernet (PoE). 2. Appearance 3. What’s in the shipping box?

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717 Contact us: [email protected] / [email protected] 2 4. Installation 1. Connecting the Power Supply

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717 Contact us: [email protected] / [email protected] 3 2. Turn on DL-303 logger 5. Configuration via DL-303 Touch the icon in the bottom-right corner of screen to enter the Settings menu.

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717 Contact us: [email protected] / [email protected] 4 6. Configuration via Web browser Search the DL-303 logger eSearch is designed to search out the DL-303 logger connected on the same Ethernet network, it supports for Linux and Windows and is needless to install. eSearch can be found from software utility CD or download HERE. Before running eSearch, turn off firewall on computer, and connect the computer and DL-303 logger to Ethernet network. 1. Launch eSearch , Click the “Search Servers” button to search the DL-303 modules 2. Double click the module name searched in the list. 3. Set available IP Address, Sub-net Mask, Gateway (designated by your network administrator) and alias and click the OK button. The Alias for easy to identify each item will be shown at the bottom-left corner of the DL-303 screen.

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717 Contact us: [email protected] / [email protected] 5 4. Enter the IP address for your DL-303 in the address bar of a web browser. (The IP address could be obtained by going to the Settings >> About menu from the touch screen.) 5. Type the Login password, and click the Submit button. (The default Login password is Admin, case sensitive.) 6. The first page displayed is Home, it shows the based configuration of the DL-303 module and the real-time data as below. In the Sensor Readings field is the real- time data of CO/CO2 concentration, temperature, humidity and dew point, the minimum value (Low Latched) and maximum value (High Latched) logged. Clicking on the Clear Low Latched button and the Clear High Latched button can reset the latched data to current value and latch new minimum or maximum value.

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717 Contact us: [email protected] / [email protected] 6 7. Configuration via RS-485 1. Install and open DCON Utility Pro from software utility CD or download HERE. 2. Launch DCON_Utility_Pro.exe 3. Click the icon to configure the COM port. 4. Select the COM Port number used to connect the DL-303 logger. 5. The Baud Rate is factory default to 9600 bps, make sure the baud rate setting in the DL-303 logger is checked in the Comport Option dialog box.

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717 Contact us: [email protected] / [email protected] 7 6. Select the Protocol tab and check the protocol that set in the DL-303 logger. 7. Select the Format tab and check the parity that set in the DL-303 logger. 8. Click the Start Search icon. 9. The DL-303 logger searched out will be listed as below.

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717 Contact us: [email protected] / [email protected] 8 10. Click the module name to configure communication setting for the logger. 11. Click the AI tab to configure module setting for the logger.

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717 Contact us: [email protected] / [email protected] 9 9. Monitoring via Mobile Devices The iAir App can be used to monitor real-time data of CO/CO2 level, temperature and humidity anywhere and anytime without any complicated configuration. The DL- 300 modules and your mobile devices such as smart phones or tablets need be addressed on the same network, and then you can get the real-time data from DL- 300 loggers by entering a specific IP address, or by performing an automatic search for available devices. If a DL-300 cannot be searched in the iAir App, please contact with the network administrator to make sure the module and your mobile devices are addressed on the same sub-network. It means that they have the same broadcast address.  Retrieve real-time data from DL-300 devices.  Self-defined DL-300 device groups for easy viewing.  Set multi-language message to display on screen. The message character is based on UTF-8 encoding.  Call DL-300 device function can recognize a specific device from the others.  Search device function can obtain all the DL-300 devices in the LAN. Download iAir user manual Platform Keyword to Search Link QR Code Android ICPDAS, CO2CO iAir iOS ICPDAS, iAir The iAir app is available to free download in Google Play and App Store. Search “iAir”, “ICPDAS” in App Store and tap on install. For more information about DL-303, please visit http://www.icpdas-usa.com/dl_303.html