Atak 40A700 Operation & User’s Manual

40A700 Ver 1.0 For technical assistance or troubleshooting please call 1-855-994-2825 or visit www.sibrandssupport.com

1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (includ- 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. - paratus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. WARNING: To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Apparatus To Rain Or Moisture. shall be palced on the apparatus 17. The mains plug or appliance coupler shall remain readily operable. 18. Use in outdoor: This TV is not designed for outdoors installation. Do not expose the TV to rain, as it may become damaged. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Safety: TO REDUCE THE RISK OF ELECTRICAL SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLEPARTS ARE INSIDE. REFER TO QUALIFIED PERSONNEL ONLY. intended to alert the user to thepresence of uninsulated “dangerous voltage” within the product’s sk of electric shock to persons. Instruction: The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance.

Observing the simple precautions discussed in this booklet will provide you with many years of enjoyment and safe operation. This product complies with all applicable US Federal safety requirements, and those of the Canadian Standards Association. 1. Read & Follow Instructions All safety and operating instructions should be read and followed before the TV is operated. 2. Retain Instructions The safety and operating instructions should be retained for future reference. 3. Heed Warnings All warnings on the TV and in the operating instructions should be adhered to. 4. Cleaning Unplug the TV from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a soft and slightly damp cloth for cleaning. 5. Water and Moisture Do not use this TV near water, for example, near a bathtub,wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool. 6. Accessories Carts and Stands Do not place this TV on a slippery or tilted surface, or on an unstable cart, stand, or table. The TV may slide or fall, causing serious injury to a child or adult, and serious damage to the TV. 7. Transporting the Television A TV and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the TV and cart combination to overturn. 8. Ventilation Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the TV and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the TV on a bed, sofa, rug, or other similar surface. The TV should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided. 9. Power Sources This TV should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your electronics retailer or local power company. 10. Power-Cord Polarization This TV is equipped with a three-wire grounding type plug,a plug with a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, the contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug. 11. Power-Cord Protection Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs,convenience receptacles, and the point where they exit from the TV. 12. Lightning For added protection for the TV during a lightning storm, or when it is left unattended and unused for long periods of time,unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the TV from lightning and power-line surges.

If an outside antenna or cable system is connected to the TV be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built up static charges. Article 810 of the National Electrical Code (U.S.A.), ANSI / NFPA 70 provides information with regard to proper grounding of the mast and supporting struc- ture, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna- discharge unit, connect on to grounding electrodes, and requirements for the grounding electrode. Example of Grounding According to National Electrical Code Instructions NEC - National Electrical Code 14. Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall on to power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 15. Overloading Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 16. Object and Liquid Entry Never push objects of any kind into this TV through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on or inside the TV. 17. Servicing Do not attempt to service this TV yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 18. Damage Requiring Service Unplug from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. If the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the product. c. If the TV has been exposed to rain or water. d. If the TV does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. e. If the TV has been dropped or the cabinet has been damaged. f. If the TV exhibits a distinct change in performance. Ground Clamp Antenna Lead in Wire Antenna Discharge Unit (NEC Section 810-20) Grounding Conductor (NEC Section 810-21) Ground Clamps Electric Service Equipment Power Service Grounding Electrode System (NEC Art 250, Part H)

When replacement parts are required, be sure that only an authorized service technician has used replacement parts specified by Apex Digital or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards and void any warranty. 20. Safety Check Upon completion of any service or repairs to this TV, ask the service technician to perform safety checks to determine whether the product is in proper operating condition. 21. Wall Mounting The TV should be mounted to a wall only by a professional. The TV may slide or fall, causing serious injury to a child or adult, and serious damage to the product. Warranty shall be voided. 22. Heat The TV should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including) amplifiers) that produce heat. NOTE TO CABLE / TV INSTALLER: This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code(U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground should be connected to the grounding system of the building, as close to the point of the cable entry as practical. FCC REGULATORY INFORMATION: This television has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residen- tial installation. This television generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this television does cause interference to other electronic equipment, which can be determined by turning the television off and on, then the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna.- Increase the separation between the equipment and television. - Connect the equipment into an outlet on a circuit different from that to which the television is connected. - Consult your dealer or an experienced radio / TV technician for assistance. Any changes or modifications not expressly approved by the party responsible for compliance may void the user’s authority to operate the equipment.

Important Safety Instructions .........................................................................................................................................1 Table of Contents ..........................................................................................................................................................5 Introduction ....................................................................................................................................................................6 Remote Control Battery Install .................................................................................................................................................................7 Overview .......................................................................................................................................................................8 TV Overview Front Panel ................................................................................................................................................................10 Rear Panel & Pedestal Removal .................................................................................................................................11 Installation Connection to Antenna & Cable / Satellite Box ...........................................................................................................12 Connection to HDMI Input ...........................................................................................................................................13 Connection to Component YPbPr Input ......................................................................................................................14 Connection to Composite Input ...................................................................................................................................15 Connection to a Personal Computer ...........................................................................................................................16 Connection to a Home Theater System ......................................................................................................................17 TV Setup Initial Setup Wizard .....................................................................................................................................................18 TV Provider Setup & Channel Auto Scan ....................................................................................................................19 Picture Setting Brightness ...................................................................................................................................................................20 Contrast ......................................................................................................................................................................20 Color ............................................................................................................................................................................20 Tint ...............................................................................................................................................................................20 Sharpness ...................................................................................................................................................................20 Color Temperature. ......................................................................................................................................................20 Audio Settings Sound Mode ................................................................................................................................................................21 Bass .............................................................................................................................................................................21 Treble ..........................................................................................................................................................................21 Balance .......................................................................................................................................................................21 Surround sound ...........................................................................................................................................................21 SPDIF Type ...................................................................................................................................................................21 Audio Language...........................................................................................................................................................21 Date & Time Settings...................................................................................................................................................22 Setup Settings Menu Languages .........................................................................................................................................................23 Transparency ...............................................................................................................................................................23 Restore Default ............................................................................................................................................................23 HDMI CEC ..................................................................................................................................................................23 Closed Captions ..........................................................................................................................................................25 Parental Control ..........................................................................................................................................................26 TV Settings Favorite .......................................................................................................................................................................2 Show / Hide .................................................................................................................................................................28 Channel Label .............................................................................................................................................................28 USB Modes MHL Setting .................................................................................................................................................................29 ................................................................................................................................................................30 .............................................31 Troubleshooting ..........................................................................................................................................................3 8 2 CEC................... ..........................................................................................................................................................24

Thank you for purchasing the energy efficient 40A700 television. It has been designed to enjoy today’s high definition television experience. With a display resolution of 40”1920X1080 you are assured of one of the finest quality televisions available today. Your television provides both analog and digital inputs including one (1) High Definition Multimedia Interface (HDMI) interconnects for the purest audio and video digital signal when connected to compatible HD sources (ie: HD set-top box, high definition DVD player or gaming console). We recommend that you read the user manual thoroughly before use to familiarize yourself with the installation and adjustment options available to you; thereby, enjoying all the features of the 40A700 for many years to come. The 40A700 package includes the following items. Save the carton & packing for future shipping • Remote Control • AAA Batteries (2) • Quick Start Guide • User Manual • Child Safety • Pedestal Base • Screws for Pedestal Base (4) • User manual • Quick Start Guide • Child Safety • Remote Control • AAA Batteries x 2 • • Screws for Pedestal Base Pedestal Base 40A700 USER’S MANUAL 40” LED TELEVISION 40A700 Ver 1.0 For technical assistance or troubleshooting please call 1-855-994-2825 or visit www.sibrandssupport.com

• Effective remote range is approximately 16 feet at an angle of no greater than 30° to the left / right or 20° up / down to the IR sensor. • To avoid possible damage from battery chemical leakage, remove the batteries if you do not plan to use the remote for an extended period of time. Do not mix batteries of different age and / or type. Always discard used batteries safely. • Do not expose the remote control to liquids, direct sun- light or sources of excessive heat. • The IR receiver on the TV will not work properly if the set is in direct sunlight. NOTE: Improper use of batteries can result in a chemical leakage or explosion. Comcast or Direct TV : 10030 Dish Network : 506 RCA Universal : 0030 30 30 IR Receiver Cable / Satellite Remote Control Codes: NOTE: The remote control from your Cable/Satellite provider can be programmed to operate most of the major functions of this TV model which include: POWER, INPUT / SOURCE, VOLUME +, VOLUME - , CHANNEL +, CHANNEL - , SELECT/OK/ENTER (based on your remote), and NUMBER buttons. For non-major TV functions not listed, use the remote control included with this TV. To program your Cable / Satellite remote to operate this ATAK TV, follow the programming instruc- tions included with your providers’ remote and use the following codes. • Turn the remote over and remove battery cover. • Place two (2) “AAA” batteries into the battery compartment with the “+” and “-“ ends facing as indicated. • Replace the cover AT & T (U-verse) : 1043 7 40A700

and the effective range will be reduced. 2. Do not hit or violently shake the remote control. 3. Never expose the remote control to high temperature or humidity. 4. If the remote is not used for an extended period of time, remove the batteries to prevent damage or injury from possible battery leakage. 40A700

2. DISPLAY Provides program information for program being viewed. 3. PLAY/PAUSE (USB) 4. PREVIOUS (USB) 5. NEXT (USB) 6. STOP (USB) 7. REP REPEAT (USB) 8. CH.LIST Press to display a list of channels saved in the TV tuner memory. 9. GUIDE Press to review scheduled programming for the currently viewed channel. 10. FAV Press to display a listing of your favorite TV channels. 11. FREEZE Pause and still-frame the current image on the display. Press again for live TV. 13. TEMP Select the Color Temperature COOL - NORMAL - WARM. 14. TSWXARROWS / ENTER Press the navigation buttons for moving through the menu options. Press the 15. EXIT Press to exit a displayed menu. 16. RETURN Press to return to the previous menu. 17. SLEEP Press to activate the Sleep function. The TV will automatically turn off after; 18. MENU Press to display the Main menu. 19. ASPECT Select the viewable display aspect options: NORMAL - WIDE - ZOOM - CINEMA. 20. VOLUME (+ / -) Adjust the volume up (+) or the volume down (-). 21. LAST Press to switch between the current channel and previously viewed channel. 22. MUTE Press to temporarily turn off the TV audio. Press again to resume. 23. CHANNEL (TS) Change the channel up or down. 24. NUMBERS / DASH Select desired TV channel directly. For example: to select digital channel 4-1, press “4”, press “-”, and press “1” = (4-1). 25. INPUT Press to display all of the input sources on screen. 27. MTS Press to select a program’s second audio channel (if available). 28. CCD Press to select closed caption subtitles (if available) OFF - ON - CC ON MUTE 29. NUMBER KEYS Press number keys to enter channel numbers. 12. PICTURE STANDARD - DYNAMIC - SOFT - USER - POWER SAVING. 5 - 10 - 15 - 30 - 45 - 60 - 90 - 120 - 180 - 240(minutes) - OFF. 26. AUDIO STANDARD - MUSIC - MOVIE - USER

INPUT button to display the input options. Press the CH+ / CH- buttons to highlight the input source and press the VOL+ button to select. 3. MENU - Press the MENU button to display. Press VOL+ to select from the 6 menu options available. Press the CH+ / CH- buttons to select a feature from the selected menu then press the VOL+/VOL- buttons to adjust the volume settings. 4. Channel (-CH+) - Press the CH- / CH+ buttons to select a channel in the TV mode. 5. Volume (-VOL+) - Press the VOL- / VOL+ buttons to adjust the volume up or down. 1. POWER - Press the POWER button to turn the TV ON/ OFF (standby). The screen image will appear within a few seconds, and the LED will turn on. IR Receiver n o p q r A Green/Blue light illuminates when the television power is On.

8. USB Input Port supports MP3 and JPEG. 5. HDMI Input - Connects to digital AV equipment that feature HDMI connectivity. HDMI supports enhanced high cable not included. 6. PC IN - VGA Input - Connect an optional VGA cable (not included) from your personal computer. PC Audio Input - Audio cable (not included) for sound. 4. Component Y Pb Pr Input - Connect to an AV device that features component (Y Pb Pr) video and audio output jacks. 7. RF Input - Connect an antenna or cable connection for television reception. Note: Use an outdoor antenna, cable or satellite for best reception. 1. Headphone Jack - Connect a stereo headphone (not included) for private listening. 2. SPDIF - Connect an optional coaxial digital cable (not included) through a compatible amp / receiver to enjoy superior audio sound. 3. AV Input - Connect an external device to the composite VIDEO(Y) and AUDIO (L / R) out jacks found on most video equipment. NOTE: You must remove the pedestal before wall mounting. Wall Mounting It is recommended that you consult a professional before mounting this TV a wall. Use VESA 200 x 200 wall mount hardware. , SPDIF L R V/Y Pb HDMI1 (ARC) Pr HDMI2 VGA PC IN RF IN USB HDMI3 (MHL) AUDIO

Ant. / Cable Wall Outlet Installation Connection to Antenna & Cable / Satellite Box Roof Antenna / Cable Outlet Installation It is strongly recommended that the installation of a high quality roof top antenna, digital cable, or satel- lite set top box be used in conjunction with your television for best broadcast reception. For indoor use, we recommend an Apex Digital amplified HDTV antenna. Note: reception is determined by your regional location, geographical terrain, distance from the local broadcast transmitter and strength of antenna. How to connect with an indoor or rooftop antenna • Connect the RF coaxial (75 ohm) cable from your existing roof top / in door antenna, or wall outlet. Finger tighten the Coaxial / RF Cable end to the TV input on the panel. • Tune to TV programming directly from the television tuner. HDMI2 VGA PC IN RF IN USB HDMI3 (MHL) AUDIO

Using HDMI For BEST video performance Connect to external equipment that offers HDMI, an uncompressed, all digital video / audio interface found on today’s HD digital set top boxes and Blu-ray players. Use of this pure digital technology offers enhanced There are three (3) HDMI inputs available for use with HD set top boxes, gaming consoles and HD DVD / Blu-ray players. How to Connect HDMI From your external digital equipment, connect an HDMI cable from the HDMI output to the HDMI input on the TV’s panel. How To Use Press the INPUT button on the remote control. Use arrow buttons to highlight the input to view (HDMI1,2,3 ) then press ENTER . Coaxial / RF Cable (not included) HDMI cable ( not included ) Cable / Satellite set top box HDMI cable ( not included ) Digital set top box, gaming console,or Blu-ray w / HDMI interface Digital Cable / Satellite Set Top Box How to connect with Digital Cable / Satellite Set Top Box Connect the RF coaxial (75 ohm) cable from the video outlet of your cable / Satellite box to the RF input on the TV’s panel. Select Ch. 3 or 4 on the TV and select a channel. For greater performance, if possible, use component or an HDMI installation(shown). Refer to your set top box user manual. HDMI1 (ARC) Pr HDMI2 VGA PC IN RF IN USB HDMI3 (MHL) AUDIO HDMI1 (ARC) r HDMI2 VGA PC IN RF IN USB HDMI3 (MHL) AUDIO

YPbPr Input For BETTER video performance Connect to external equipment that features component video output jacks for better performance. Use the Component Y Pb Pr video and audio inputs with a set top box, gaming console or DVD player. How to Connect Component When connecting external equipment to your television, match the colors of the connecting jacks (Video: Blue, Green, Red; Audio: White / Red ). Connect the optional component video cables (blue, green, red) (not included) from the video output jacks (Y, Pb, Pr) on your external equipment to the Component Y Pb Pr input on the TV’s panel. Connect white / red audio cables for sound from the audio (L / R) output jacks on your external equipment to the AV L / R input jacks on the TV’s panel. How to Use Press the INPUT button on the TV remote control. Use arrow buttons to highlight the input to view(Component) then press ENTER. Connecting External Equipment to Component Video IN (Y Pb Pr) Component cables (not included) Digital set top box, gaming console or DVD SPDIF L R V/Y Pb HDMI1 (ARC) Pr

Connecting External Equipment to AV Composite IN on your television For GOOD video performance Connect to external equipment using optional video and audio cables. Composite output jacks are available on most set top cable / satel- lite boxes and DVD players. (HDMI and Component connections are recommended for the best performance.) How to Connect Composite AV When connecting external equipment to your television, match the colors of the connecting jacks (Video: Yellow Audio: White & Red). Connect the yellow video cable from the video output jack on your external A / V equipment (i.e.: DVD player, set top box) to AV input on the TV’s panel. Connect the white / red audio cables for sound from the audio (L / R) output jacks on your external equipment ( i.e.: DVD Player, set top box) to the AV (L / R) jacks on the TV’s panel. How to Use Press the INPUT button on the remote control. Use arrow buttons to highlight the input to view (AV) then press ENTER. Audio Video Cable (not included) Digital set top box, gaming console or DVD SPDIF L R V/Y Pb HDMI1 (ARC) Pr

Installation Connection to a Personal Computer Connecting a Personal Computer with VGA to your television Recommended computer display resolution:1920x1080@60 Hz How to Connect a PC Connect using an optional male to male VGA cable (not included) from your PC to the VGA input on the TV’s panel. How to Connect Audio sound Connect an audio cable (not included) from the computer’s mini audio output jack to the audio input on the TV’s panel. How to Use Press the INPUT button on the remote control. Use the buttons to highlight the VGA input and press the ENTER button. NOTE: If your PC uses a standard signal mode, the screen will adjust automatically . HDMI2 VGA PC IN RF IN USB HDMI3 (MHL) AUDIO

Press the appropriate INPUT ENTER. How to Use (Audio) Installation Connection to a Home Theater System Connection to a Home Theater Audio System Front Left Front Right Center Channel Dolby Surround Connection Illustration Optional cables Dolby Prologic SPDIF L R V/Y Pb HDMI1 (ARC) Pr SPDIF L R V/Y Pb HDMI1 (ARC) Pr

Initial Setup Wizard After connecting your TV antenna or cable wire, turn the television ON. The quick setup wizard will display on-screen. Select your preferred Picture setting followed by antenna options and performing Auto Scan to receive local broadcast channels that will be stored in the TV tuner memory. The wizard will direct you to the TV menu to select antenna options and perform Channel Auto Scan. Channels found will be stored into the TV tuner memory. How to Navigate: Press the arrow button to highlight AIR / CABLE based on your antenna connection. Highlight Start to Scan and press ENTER. Channel Auto Scan may take several minutes to complete. 18

& Channel Auto Scan To enter the Channel Menu: • Press the MENU button • Using the W X arrow buttons; scroll to highlight Channel • Press the down T arrow buttons to highlight Air / Cable Select Cable if you subscribe to a pay television service WITHOUT a set top box. • Press the W X arrow buttons to highlight Cable. • NOTE: Channel Auto Scan may take several minutes to complete. Cable Mode Air Mode Select Air when TV is connected to an indoor / outdoor antenna. • Press the W X arrow button to highlight Air. • NOTE: Channel Auto Scan may take several minutes to complete. NOTE: For Cable or Satellite users WITH a set-top box, there is no need to run Channel Auto Scan. Connect your cable or satellite set top box to one of the available inputs on the TV for viewing. Press the T arrow button to highlight Auto Scan and press ENTER. Press ENTER to begin Auto Scan. Press the T arrow button to highlight Auto Scan and press ENTER. Press ENTER to begin Auto Scan. After the Setup Wizard has been completed, please skip this page as your Cable/Antenna is already set up. The following instructions on this page are provided if you need to make changes at a later time. 19

and personal preferences. Adjustment options include contrast, brightness, color, sharpness and color temperature. How to Navigate: Press the MENU button on the remote control. Navigate using arrow buttons to select Picture. Press the down arrow button to highlight Picture Mode, then press the arrow button to select your viewing preference from 5 factory options: EnergySaving > User > Standard > Dynamic > Mild. The Standard setting is recommended for most brightly lit viewing environments. Depending on the ambient light level in the room, you may find one of the other Picture settings To make more critical adjustments based on your own preferences in User. *The Energy Saving feature adjusts the brightness of the TV in order to save energy and reduce power consumption. Note: When adjustments are completed, you may select another menu by pressing the Menu button. • Brightness Press down arrow button to highlight Brightness. Navigate using the arrow buttons to increase or decrease overall brightness. • Contrast Press down arrow button to highlight Contrast. Navigate using the arrow buttons to increase or decrease contrast intensity. Press down arrow button to highlight Color. Navigate using the arrow buttons to increase or decrease color intensity. Press down arrow button to highlight Tint. Navigate using the arrow buttons to adjust colors toward green or reddish tint. Press down arrow button to highlight Sharpness. Navigate using the arrow buttons to soften or view crisper edges in the picture. Press down arrow button to highlight your Color Temperature. preference. Navigate using the ar- row buttons to select Cool, Medium or Warm setting. • Color • Tint • Sharpness • Color Temperature. Picture Setting more pleasing.

select digital audio options when connected to a Dolby Digital receiver though a (SPDIF) coaxial digital output. How to Navigate: Press the MENU button on the remote control. Navigate using arrow buttons to select Sound. Press the arrow button to highlight Sound Mode, then press the arrow button to select your sound preference from 4 factory options: Music > Movie > User > Standard . To make more critical adjustments based on your own preferences in User Press down arrow button to highlight Sound Mode. Press Press button to select Music > Movie > User > Standard . Music Preserves the original sound. Good for musical programs. Movie Enhances treble and bass for a rich sound experience . User Select to customize audio settings. Standard Produces a balanced sound in all environments. • SPDIF Type Press MENU to enter the main menu, press button to select Sound. Press button to select among SPDIF Type. Press button to select(RAW / Off / PCM). • Surround Sound Press MENU to enter the main menu, press button to select Sound. Press button to select among Surround Sound. Press button to select(Off / On) • Accessibility • VoiceGuide • VideoDescription Note: When adjustments are completed, you may select another menu by pressing the Menu button. • Sound Mode • Bass • Treble • Balance Audio Settings Press down arrow button to highlight Bass. Press down arrow button to highlight Treble. Press down arrow button to highlight Balance. Press buttons to increase or decrease low frequency Press buttons to increase or decrease high frequency intensity. intensity. buttons to adjust sound towards the left or right speaker. Press down arrow button to highlight Accessibility. Press buttons to Enter. • Auto Volume Press MENU to enter the main menu, press button to select Audio. Press button to select among Auto Volume. Press button to select(Off / On). • Audio Languages(only Digital TV mode) Press MENU to enter the main menu, press button to select Audio. Press button to select among Audio Languages. Press button to select different Audio Languages. • MTS(only Analog TV mode) Press MENU to enter the main menu, press button to select Audio. Press button to select among MTS. Press button to select(Stereo / SAP / Mono). 21

The Time menu includes adjustment of settings for your local time zone and daylight savings time. The clock will adjust automatically after the initial Channel Auto Scan of available broadcast channels in your area (see page 19 for TV Setup). How to Navigate: Press the MENU button on the remote control. Navigate using arrow buttons to select Time. • Press down arrow button to highlight Sleep Timer then press the arrow button to select time to view before the television timer turns the set off: 5 Min > 10 Min > 15 Min > 30 Min > 45 Min > 60 Min > 90 Min > 120Min > 180 Min > 240 Min > OFF. . • Press down arrow button to highlight Time Zone then press the arrow button to select between: Eastern > Central ! Mountain ! 3acific ! Alaska > Hawaii > Atlantic. • Press down arrow button to highlight Daylight Savings Time. Navigate using the arrow buttons to turn this feature on or off. • Press down arrow button to highlight Time Format. Navigate using the arrow buttons to turn this feature 12-hour or 24-hour. • Press down arrow button to highlight Auto Clock. Navigate using the arrow buttons to turn this feature on or off. • Clock and Date are automatically set the first time the tuner receives a broadcast channel. Note: When adjustments are completed, you may select another menu by pressing the Menu button. 22

computer monitoring,closed captions, enhancement of black detail in the picture and resetting your TV back to its fac- tory default status. Setup Settings How to Navigate: Press the MENU button on the remote control. Navigate using arrow buttons to select Setup. Gain access to display options by pressing the down arrow button to highlight Menu Language or other options, then press arrow button on your remote to select. NOTE: Closed Caption and Advanced are features described on the following pages. Press the arrow button to automatically reset all adjustments back to their original factory settings. tl u a f e D e r o t s e R • Press the arrow button to enter. HDMI CEC • Other languages include English, Français, Español. Navigate using the arrow but- tons to turn ON/OFF Adjust the duration of the Zoom Mode menu. Press button to select. Zoom Mode • cy n e r a p s n a r T • s e g a u g n a L u n e M • 23

How to Navigate: Press the MENU button on the remote control. Navigate using arrow buttons to select Setup • To turn the HDMI CEC option On/Off use the pq buttons to highlight HDMI CEC then press t u. • Auto Standby: the TV will turn Off when there is No Signal on the TV for several minutes. • Auto TV On: TV will automatically turn On when the connected CEC device is turned On. • Turn HDMI ARC ON if you want to use the ARC function with a connected 5.1/7.1 Home Theater System. • Device Control: allows for a connected CEC device to be controlled by the TV remote. Note: When adjustments are completed, you may select another menu by pressing the Menu button. • Device List: displays a list of HDMI CEC devices currently connected to the TV. • Note: refer to the user manual of your Home Theater System for compatibility, instructions, and connections needed to use the HDMI ARC feature. • Note: refer to the user manual of your connected CEC device for compatibility, instructions, and connections needed to use the HDMI CEC feature. 24

ing CC display types and font styles. Note: When adjustments are completed, you may select another menu by pressing the Menu button. Closed Captions How to Navigate: Press the MENU button on the remote control. Navigate using arrow buttons to select Setup. • Press the down arrow button to highlight Closed Caption then press the arrow button to highlight CC Mode. • Navigate using the arrow buttons to select Off > On > CC On Mute. • Press down arrow button to highlight Basic Sdection. Navigate using the arrow buttons to select CC1-4, TEXT1-4. • Press down arrow button to highlight Advanced. Navigate using the arrow buttons to select, Service 1-6. • Press down arrow button to highlight Option. Press the arrow button to enter a menu with options to customize text fonts, colors and opacities.

guidelines. To gain access and select your preferences within the Parental menu make certain your input is set to TV. How to Navigate: Press the MENU button on the remote control. Navigate using arrow buttons to select Lock. Gain access to parental rating options by pressing the down arrow button to highlight Enter Password. Enter your 4 digit code (factory default code is “0000”) unless previously changed. • To make changes to parental controls, highlight System Lock then press the arrow button • To set parental controls for television programming or DVD movies, press the arrow buttons to highlight Navigate using the buttons to highlight TV / MPAA menu. • Highlight TV, then press the arrow button to enter the TV Ratings menu and select your preference. • Highlight MPAA, then press the arrow button repeatedly to select your movie rating preference. TV-Y Appropriate for all children TV-Y7 Appropriate for all children over 7 TV-G General Audience TV-PG Parental Guidance Suggested TV-14 Parents Strongly Cautioned TV-MA Mature Audience Only G General Audience PG Parental Guidance Suggested PG-13 Parents Strongly Cautioned R Restricted NC-17 No One Under 17 Permitted X Adults Only NOTE: RRT Setting and Reset RRT are not user adjustable settings. Parental Control US Rating. • To change the password, press arrow button to display a screen to enter your new password, then confirm again. (not illustrated) 26

To gain access and select your preferences within the Parental menu make certain your input is set to TV. How to Navigate: Press the MENU button on the remote control. Navigate using arrow buttons to select Lock. Gain access to rating options by pressing the down arrow button to highlight Enter Password. Enter your 4 digit code (factory default code is “0000”) unless previously changed. See page 26 for information on how to change your password. Then press the arrow buttons to highlight Canada. Navigate using the buttons to highlight Canada English. • Navigate using down arrow button to highlight Canada English then press the arrow button repeatedly to select your ratings preference. • Navigate using down arrow button to highlight Canada French then press the arrow button repeatedly to select your ratings preference. Note: When adjustments are completed, you may select another menu by pressing the Menu button. E Turn off C Appropriate for all children C8+ Appropriate for everyone 8 years old and up G General Audience PG Parental Guidance 14+ Appropriate for Children over 14 years old 18+ Mature Audience Only E Turn off G General Audience 8 ans+ Appropriate for Children 8 years old and up 13 ans+ Appropriate for Children 13 years old and up 16 ans+ Appropriate for Children 16 years old and up 18 ans+ Mature Audience Only 27

nels, add or skip channels in memory and label or name channels.(For antenna and Auto Channel Scan setup, please refer to page 19.) How to Navigate: Press the MENU button on the remote control. Navigate using arrow buttons to select Channel. Press the down button to highlight your preferences. • Highlight Favorite to add channels to your Favorites List. Navigate using the ŻŹźŸ arrow buttons to select channels to be added or deleted from your list. Press ENTER to add or delete a channel. A checkmark indicates a channel has been added. You may also display your list of Favorite channels by pressing the FAV button on the remote control • Highlight Show / Hide to select or skip channels already in memory. Navigate using the ŻŹźŸ arrow buttons to access the list of available channels. Press ENTER to change the channels status. A checkmark indicates a channel has been added. • Highlight Channel Label to name or rename a broadcast channel. Navigate using the arrow button to enter the screen menu to relabel a channel. Use the arrow buttons to spell out each letter, number or character. Use arrow buttons to advance to the next space. • Favorite • Show / Hide • Channel Label TV Settings 28

2. Press the ▲▼ buttons to select MEDIA in the Source menu, and then press the ENTER button. Select Move mblog.jpg Play File:1 Total size:2.0GB Unused size:1.8GB 001/001 534 x 800 34.3KB Repeat mblog.jpg Music C:\ C: USB Photo To view Photos on the TV: Press the Press the button to return main menu. Press the or button to view the next photo. Press the buttons to select Photo. ▲ ▲ or ▼ ▼ button to highlight the photo you want to view. Select Move Photo LOVE.mp3 Play File:1 Total size:2.0GB Unused size:1.8GB 002/002 Repeat LOVE.jpg Title: Artist: Album: Year Pause 00:00 02:38 Music C:\ C: USB ▲ ▲ ▲ ▲ Press ENTER to view the photo. To Listen to Music on the TV: Press the Press the button to stop playback. Press the or button to skip to the next/previous song. Press the buttons to select Music. ▲ ▲ or ▼ ▼ button to highlight the song you want to hear. ▲ ▲ ▲ ▲ Press ENTER to start playing the song. ▲ ▲ 29

You can connect a MHL-enabled device, such as a cell phone, and view your device’s screen on your TV. To connect a MHL-enabled device: 3 4 Connect a MHL cable (not provided) to the micro USB port on the device, then connect the other end of the cable to the HDMI /MHL jack on the side of your TV. 1 Press INPUT to open the Input Source list. 2 Press or to select HDMI3,then press ENTER. Your device’s menu will vary depending on the device and the apps you have loaded on the device. HDMI-TO-MHL Cable MHL-enabled device 0 3 HDMI2 VGA PC IN RF IN USB HDMI3 (MHL) AUDIO

Resolution 1920x1080 Brightness (cd / m2) 200 Dynamic Contrast Ratio 5000:1 Vertical Viewing Angle (degrees) 176° Horizontal Viewing Angle (degrees) 176° Maximum Colors (millions) 16.7M Power Consumption 90Watts Audio Power 2 X 10 W Dimension without Pedestal Installed 35.9” (W) x 20.7” (H) x 3.2” (D) Weight without Pedestal 13.0 lbs Input Connections ) 1 ( o e di V e tis o p m o C ) 1 ( r P b P Y ) 3 ( I M D H ) 1 ( F R SPDIF Digital Audio Output (1) ) 1 ( A G V / C P ) 1 ( N I oid u A C P Headphone Jack (1) ) 1 ( B S U

s n o it u l o S e l b i s s o P m o t p m y S Cannot receive certain channels through the antenna • Perform Channel Scan to add channels into the TV tuner memory. See page 18. • Readjust your antenna and retry Auto Channel Scan. • Signal from the TV station may be weak in your area. .t n e m piu q e V / A la n r e tx e r u o y f o n oit alla ts ni o e div e h t k c e h C • r olo c o N See pages 15. Video noise or choppy picture • Readjust antenna. Keep TV away from noise sources, neon lights, and microwave appliances. TV blocked on certain channels • Perform Channel Scan to add channels into the TV tuner memory. See page 18. • Check whether the channel was deleted. See page 28. • Check parental control settings. See pages 26, 27. • Restore default settings. See page 23. Cannot use certain functions • If the item chosen in a menu is shown in gray text, that item cannot be selected in the current input. . d e tr e s ni yle t elp m o c e r a s elb a c oid u a d e tc e n n o c t a h t k c e h C • d n u o s o N • Verify you have selected the correct audio source from your amplifier. See page 16. • Mute function may be enabled, press mute on the remote. Black box on screen • The “Text” option is enabled and no text is available. • Press the CCD button on the remote control to turn off. . g nic alp e r d e e n y a m lo rt n o c e t o m e r e h t ni s eir e tt a B • r e w o p o N • Re-attach AC plug to wall outlet. .le n n a h c r e h t o n a y rt ,k a e w e b y a m la n gis le n n a h c V T la tigi D • e r u tcip o N • Press INPUT button to verify the desired input selected. • Re-connect the antenna or cable wiring. • Restore default settings. See page 23. Remote control does not function • Replace batteries with new ones. • Check that battery polarity is correct. • Point remote directly at the TV’s IR receiver. See page 7.

We warrant this product to be free from defects in material and workmanship under normal use for a one-year period from the original date of purchase from an authorized ATAK dealer. We will repair or replace the unit free of charge should it become defective under this warranty, providing you, the original purchaser, submit proof of purchase (sales slip) along with the TV and all accessories. Should you be missing any of the included accessories or other components (screws, pieces, etc.), please contact the Customer Support Center to secure a replacement. It is not necessary to bring the unit back to the store. When calling, please reference the parts list found in the Instruction Manual to help us accurately identify the missing parts and promptly provide replacements. During the one-year period from the original purchase date, we will service or exchange the TV, at no charge. To obtain warranty service or replacement within the duration of the one-year warranty, please return the product and all accessories to the original place of purchase. For technical support visit our website www.sibrandssupport.com or call the the ATAK Technical Support Center for technical assistance or troubleshooting at 1-855-994-2825, Monday - Saturday, 10:00AM to 7:00PM EST. There are no consumer serviceable parts contained in this product and any attempt by the owner to service or repair the unit will immediately void all warranty coverage. This warranty does not cover any product which has been subject to damage due to an act of nature, misuse, neglect, accident, abuse, outdoor use, commercial use, or modification of, or to, any part of the product, including the antenna. Damage to any external media such as DVD, CD, and/or USB or other memory devices are not covered nor is the cost incurred in shipping the unit for warranty repair. Under no circumstances shall ATAK be liable for any loss (direct, indirect, incidental, foreseen, unforeseen, special or consequential) or for any damage arising out of, or in connection with, the use of this product. UNDER NO CIRCUMSTANCES WILL ATAK BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. This warranty does not cover re-manufactured units, or product sold 'As Is'. This warranty is valid only to the original purchaser of the Product in the United States and Canada and grants specific legal rights.