Delta Electronics OPT-1250xxxx Series Specification Sheet

1 Jan., 2008 Rev. 0H www.deltaww.com RoHS Compliant 1X9 SC Duplex Receptacle Transceiver Module for Gigabit Ethernet Features z Industry Standard 1 x 9 Footprint and duplex SC Connector interface z Compliant with Specifications for IEEE 802.3z/ Gigabit Ethernet z OPT-1250Bxxx compliant with the 1.0625GBd Fiber Channel 100-SM-LC-L FC-PI Rev.13 z OPT-1250Axxx compliant with the 1.0625GBd Fiber Channel FC-PI 100-M5-SN-I Rev.13 z Single +3.3V or 5V Power Supply z PECL or TTL Receiver Signal Detect Indicator z Wave Solderable and Aqueous Washable z Laser Class 1 Product which comply with the requirements of IEC 60825-1 and IEC 60825-2 z RoHS Compliant per Directive 2002/95/EC. Description The OPT-1250xxxx series from DELTA is a 1X9 transceiver module designed expressly for high-speed communication applications that require rates of up to 1.25Gbit/sec. It is compliant with the Gigabit Ethernet standards as well as 1x Fiber channel standards. The OPT-1250xxxx transceivers are provided with the SC receptacle that is compatible with the industry standard SC connector. The post-amplifier of the OPT-1250xxxx also includes a Signal Detect circuit that provides a PECL or TTL logic-Low output when an unusable optical signal level is detected. (see order information) The OPT-1250xxxx transceiver is a Class 1 eye safety product. The optical power levels, under normal operation, are at eye safe level. Applications z Gigabit Ethernet/Fast Ethernet z Switched backplane applications Performance OPT-1250AxFxx: z 850nm VCSEL, up to 500m in 50/125μm MMF z 850nm VCSEL, up to 220m in 62.5/125μm MMF OPT-1250BxQxx: z 1310nm FP laser, Data Link up to 10km in 9/125um SMF z 1310nm FP laser, up to 550m in 50/125μm MMF z 1310nm FP laser, up to 550m in 62.5/125μm MMF

2 Jan., 2008 Rev. 0H www.deltaww.com Absolute Maximum Ratings Parameter Symbol Min. Typ. Max. Unit Note Storage Temperature Ts -40 85 ºC Lead Soldering Temperature TSOLD 260 ºC Lead Soldering Time tSOLD 10 sec. Supply Voltage VCC 0 6 V Recommended Operating Conditions Parameter Symbol Min. Typ. Max. Unit Note Ambient Operating Temperature TA 0 70 ºC 1 Supply Voltage OPT-1250x1xx OPT-1250x2xx, OPT-1250x4xx VCC 4.75 3.135 5.25 3.465 V Note: 1.See ordering information for detail Electrical Characteristics (At recommended ambient operating temperature, TA and supply voltage, VCC) Parameter Symbol Min. Typ. Max. Unit Note Total Supply Current ICCT 310 mA Transmitter Transmitter Data Input Voltage-Low VIL-VCC -1.810 -1.475 V 1 Transmitter Data Input Voltage-High VIH-VCC -1.165 -0.880 V 1 Transmitter Differential Input Voltage VDT 0.3 1.6 V 2 Receiver Data Output Voltage-Low VOL-VCC -1.95 -1.62 V 1 Data Output Voltage-High VOH-VCC -1.045 -0.74 V 1 Receiver Differential Output Voltage VDR 0.5 0.7 1.2 V 2 Output Data Rise/Fall Time tr/tf 0.4 ns 3 PECL SD Output LOW level output voltage HIGH level output voltage VSDL-VCC VSDH-VCC -1.84 -1.1 -1.60 -0.9 V 4 TTL SD Output LOW level output voltage HIGH level output voltage VSDL VSDH 0 2 0.8 VCC V 5 Notes: 1. For OPT-1250A1F1x, OPT-1250A4F1x, OPT-1250B2Q1x and OPT-1250B1Q1x. 2. For OPT-1250A2F2x and OPT-1250B4Q2x. 3. These are 20%~80% values 4. For OPT-1250A1F1x, OPT-1250A2F2x, OPT-1250B1Q1x and OPT-1250B2Q1x 5. For OPT-1250A4F1x and OPT-1250B4Q2x

3 Jan., 2008 Rev. 0H www.deltaww.com Single Mode Transceiver (OPT-1250B1Q1x, OPT-1250B2Q1x, OPT-1250B4Q2x) (At recommended ambient operating temperature, TA and supply voltage, VCC; Data Rate=1.25Gb/sec, PRBS=27-1 NRZ, 9/125um SMF) Parameter Symbol Min. Typ. Max. Unit Note Transmitter Output Optical Power (Avg.) OPT-1250BxIx OPT-1250BxQx PO -12 -9.5 -3 -3 dBm Optical Extinction Ratio ER 9 dB Center Wavelength λC 1270 1310 1355 nm Spectral Width (RMS) σ 4.5 nm Optical Rise/Fall time tr/tf 0.4 ns 1 Relative Intensity Noise RIN -120 dB/Hz Output Eye Complies with the IEEE 802.3z/D2 specification, and is class 1 laser eye safety Receiver Sensitivity (Avg.) PIN -19 dBm 2 Input Optical Wavelength λ 1310 nm Optical Rise/Fall Time tr/tf 0.5 ns 1 Signal Detect-Asserted (Avg.) PA -19 dBm Signal Detect-De-asserted (Avg.) PD -35 dBm Signal Detect-Hysteresis PA-PD 0.5 dB Receiver Saturation Power PSAT -3 dBm Notes: 1. These are unfiltered 20%~80% values 2. The sensitivity is provided at a BER of 1×10-10 or better with an input signal consisting of 1250Mb/s, 27-1 PRBS and ER=9dB. Mask of the eye diagram for the optical transmit signal

4 Jan., 2008 Rev. 0H www.deltaww.com Multi-Mode Series Transceiver (OPT-1250A1F1x, OPT-1250A2F2x, OPT-1250A4F1x) (At recommended ambient operating temperature, TA and supply voltage, VCC; Data Rate=1.25Gb/sec, PRBS=27-1 NRZ, 62.5/125um MMF) Parameter Symbol Min. Typ. Max. Unit Note Transmitter Output Optical Power (Avg.) PO -9.5 -4 dBm Optical Extinction Ratio ER 9 dB Center Wavelength λC 830 850 860 nm Spectral Width (RMS) σ 0.85 nm Optical Rise/Fall time tr/tf 0.26 ns 1 Relative Intensity Noise RIN -117 dB/Hz Output Eye Complies with the IEEE 802.3z/D2 specification, and is class 1 laser eye safety Receiver Sensitivity (Avg.) PIN -17 dBm 2 Input Optical Wavelength λ 850 nm Optical Rise/Fall time tr/tf 0.36 ns 1 Signal Detect-Asserted (Avg.) PA -17 dBm Signal Detect-De-asserted (Avg.) PD -30 dBm Signal Detect-Hysteresis PA-PD 0.5 dB Receiver saturation power PSAT -4 dBm Notes: 1. These are 20%~80% values 2. The sensitivity is provided at a BER of 1×10-10 or better with an input signal consisting of 1250Mb/s, 27-1 PRBS and ER=9dB. Mask of the eye diagram for the optical transmit signal

5 Jan., 2008 Rev. 0H www.deltaww.com Pin Definition PIN Symbol Functional description 1 GND Receiver Signal Ground 2 RD (+) Receiver Data Out Non-inverted (LVPECL) 3 RD (-) Receiver Data Out Inverted (LVPECL) 4 SD Receiver Signal Detect (LVPECL or TTL) 5 VccR Receiver Power Supply, 6 VccT Transmitter Power Supply 7 TD (-) Transmitter Data In Inverted (LVPECL) 8 TD (+) Transmitter Data In Non-inverted (LVPECL) 9 GND Transmitter Signal Ground Pin Descriptions Pin 1 Receiver Signal Ground, GND Directly connect these pins to the ground plane. Pin 2 Receiver Data Out Non-inverted (LVPECL), RD (+) Receiver Data output Non-inverted (LVPECL), RD (+). Pin 3 Receiver Data Out Inverted (LVPECL), RD (-) Receiver Data output Inverted (LVPECL), RD (-). Pin 4 Receiver Signal Detect (LVPECL/TTL), SD PECL/TTL logic family. Normal Operation: Logic “1” Output Fault Condition: Logic “0” Output. Pin 5 Receiver Power Supply, VccR Provide +3.3/5V dc power supply. Pin 6 Transmitter Power Supply, VccT Provide +3.3/5V dc power supply. Pin 7 Transmitter Data In Inverted (LVPECL), TD (-) Transmitter Data Input Inverted (LVPECL), TD (-) Pin 8 Transmitter Data In Non-inverted (LVPECL), TD (+) Transmitter Data Input Non-inverted (LVPECL), TD (+) Pin 9 Transmitter Signal Ground, GND Directly connect these pins to the ground plane.

6 Jan., 2008 Rev. 0H www.deltaww.com Recommend Circuit Schematic for Internal DC Coupled Transceivers R1=R3=82 ohm (3.3V),68 ohm(5V) R2=R4=130 ohm (3.3V),191 ohm (5V) R5=R6=150 ohm (3.3V),270 ohm (5V) R7=130 ohm (3.3V PECL),82 ohm(5V),NC (TTL) R8=82 ohm (3.3V PECL),130 ohm(5V),NC (TTL) C1=C2=C3=C4=C5=C6=C7=100 nF C8=C9=10uF L1=L2=1uH

7 Jan., 2008 Rev. 0H www.deltaww.com Recommend Circuit Schematic for Internal AC Coupled Transceivers R1=130 ohm (3.3V PECL),82 ohm(5V),NC (TTL) R2=82 ohm (3.3V PECL),130 ohm(5V),NC (TTL) C1=C2=C3= 100 nF C4=C5=10uF L1=L2=1uH

8 Jan., 2008 Rev. 0H www.deltaww.com Package Outline Drawing (without shielding) Package Outline Drawing (A type shielding) Class 1 Laser Product

9 Jan., 2008 Rev. 0H www.deltaww.com Package Outline Drawing (B type shielding) Package Outline Drawing (C type shielding)

10 Jan., 2008 Rev. 0H www.deltaww.com Regulatory Compliance Feature Reference Performance Electromagnetic Interference (EMI) FCC Class B EN 55022 Class B (CISPR 22A) Radio Frequency Electromagnetic Field EN 61000-4-3 IEC 1000-4-3 Electrostatic Discharge to the Duplex LC Receptacle EN 61000-4-2 IEC 1000-4-2 IEC 801.2 Electrostatic Discharge to the Electrical Pins MIL-STD-883E Method 3015.7 (1) Satisfied with electrical characteristics of product spec. (2) No physical damage Eye Safety US FDA CDRH AEL Class 1 EN 60950: 2000 EN 60825-1: 1994+A11+A2 EN 60825-2: 2000 CDRH File # 0321539-00 TUV Certificate No. R50032471 Component Recognition Underwriters Laboratories and Canadian Standards Association Joint Component Recognition for Information Technology Equipment Including Electrical Business Equipment UL File # E239394

11 Jan., 2008 Rev. 0H www.deltaww.com Ordering Information OPT- 1250X1X2X3X4X5X6X7 X1: Fiber A: Multi-mode 850nm B: Single-mode 1310nm X5: RoHS Compliant Blank: Non-RoHS Compliant R: RoHS Compliant X2: Power Supply Voltage and SD Level 1: 5.0V, PECL SD Level 2: 3.3V, PECL SD Level 4: 3.3V, TTL SD Level X6: Shielding Type & Revision Code A: New design B: B type shielding C: C type shielding D: A type shielding X3: X4: Distance F: 500m, 50/125μm MMF Q: 10km, 9/125μm SMF Data Coupling 1: 1x9 SC DC/DC 2: 1x9 SC AC/AC X7: Temperature Blank: 0 to +70 degree C H: -10 to + 85 degree C T: -40 to + 85 degree C Appendix A．Document Revision Version No. Date Description 0G 2006-09 Release 0H 2008-01 Correct “Total Supply Current”、“TTL SD Output”、 “PECL SD Output”、 Recommend Circuit Schematic、Optical Rise/Fall time、 Spectral Width (RMS)、Pin Definition、Package Outline、Order Information