Clear-Com ENCORE MS-702 Instruction Manual

1 - 3 Figure 1-1: Front Panel 1. Talk Buttons: Each channel has an illuminated talk button for activating the microphone feed to that channel. Each talk button has a dual action (momentary or latching feature) depending on how the button is pressed. If desired, the latching function for each channel can be defeated using the option switches on the rear panel. The following describes the various functions of these multi-purpose buttons: • MOMENTARY: Press and hold the talk button while you are speaking. Release it when you are finishe ...

i LIMITED WARRANTY Vitec Group Communications (VGC) warrants that at the time of purchase, the equipment supplied complies with any specification in the order confirmation when used under normal conditions, and is free from defects in workmanship and materials during the warranty period. During the warranty period VGC, or any service company authorized by VGC, will in a commercially reasonable time remedy defects in materials, design, and workmanship free of charge by repairing, or should VGC in its discretion deem it necessary, replacing the product in accordance with this lim ...

i v of customer furnished components resulting in damage to VGC provided product. This limited warranty is not transferable and cannot be enforced by anyone other than the original consumer purchaser. This warranty gives you specific legal rights and you may have other rights which vary from country to country. ...

4 - 1 TECHNICAL SPECIFICATIONS MS-702 TWO-CHANNEL STATION dBu is an absolute measurement. 0 dBu is referenced to 0.775 volts RMS Panel Microphone Input Input Type Electret Input Impedance >=2KΩ Mic Limiter Threshold 0 dBu ±3 dB Mic Limiter Range >= 20 dB Headset Microphone Input Input Type Dynamic Input Impedance >= 1KΩ Mic Limiter Threshold 0 dBu ± 3dB Mic Limiter Range >= 15 dB Program Line Input Maximum Level before Clipping >= 20 dBu Input Impedance >= 5KΩ Headset Output Load Impedance >= 8Ω Output Impedance <= 25Ω Output L ...

3 - 2 TROUBLESHOOTING TIPS SYMPTOM CAUSE SOLUTION System does not operate. Blue talk buttons do not illuminate and short lights do not illuminate. No AC power to the MS-702. Make sure the power switch on the rear panel is turned on. Check the AC connection and cable. Plug into a dependable AC source. The MS-702 has an internal power supply failure. Unit requires servicing. System does not operate when power switch is turned on. Blue talk lights and red short lights wink. Direct short on the intercom channel indicated by the red short ...

3 - 4 Table 3-1: Troubleshooting Tips Far too many terminations on the intercom line. Check all main stations and power supplies to make sure each intercom channel is terminated at only one point. SYMPTOM CAUSE SOLUTION ...

1 - 2 The MS-702 also incorporates a dual-channel program interrupt system (IFB). When activated, one or more stations can interrupt the program audio to either another intercom station or a talent wearing Clear-Com’s wired or wireless talent receivers. Clear-Com’s stand-alone IFB system can also be connected to this station. The MS-702 provides DC power to operate Clear-Com beltpacks and remote stations. The power is distributed between the two channels and will support up to 40 RS-601 beltpacks or 10 speaker stations or 12 head ...

i i i years the warranty of any product offered with a standard two-year warranty. The total warranty period will not extend beyond five years. Any purchase of an extended warranty provides 24 x 7 customer support in addition to the warranty immediately upon purchase of the warranty extension. Note: VGC does not offer warranty extensions on UHF wireless intercom systems, or on any product with a 1-year or 90-day warranty. SERVICE CONTRACT VGC also offers service contracts that provide 24 x 7 telephone support, advance replacements, training, proactive maintenance, on-site visit ...