GALLUNOPTIMAL GOSprint65 Operating Instructions

Features Soldering iron with temperature control / Auto-Standby after 10 minutes / Sleep mode after 20 minutes / Ceramic PTC heating element (3-pole, grounded) / Temperature adjustable via buttons on soldering iron / Ergonomic handle Specification Valtage Power Temp. range Stability Heater Heating indication Temp. unit Display 110/240VAC 65W 80-480°C +/-2°C PTC LED °C/°F LCD press Menü long change Temperatur short Temperature compensation short Temperature unit short Standby short Working mode WARNUNG Disregarding the following instructions can lead to serious injury or death of the user. When the unit is switched on, the soldering tip automatically heats up to the last set temperature. There is a risk of burns on the surfaces! The device is designed for soldering soft solder with different temperatures. Any other use is not permitted. Do not touch the metal parts on the tools during operation and immediately after switching off, CAUTION! Danger of burns! Do not use the device near flammable materials and components. Use a heat-resistant work surface and keep your workplace clean. Solders, fluxes and heated materials can develop harmful properties and should be extracted in a controlled manner. Do not inhale these toxic vapours or gases and ensure adequate ventilation. The device may only be used for operation in dry indoor areas. Protect the device from liquids and moisture, even by possibly wet hands. Otherwise, short circuits and electric shocks could be caused. Inform other people in the work area that the temperature can be very high during operation. Switch off the unit as soon as the work is finished to avoid danger. Do not leave the appliance unattended while it is switched on. After switching off, wait until the heated parts have reached room temperature if you want to touch parts or change parts. Add button Power/Menü button Display 3corded power cabel Shell Soldering tip Minus button Stainless steal outer casing The soldering iron needs to be tested before it leaves the factory, so the soldering tip may cover a small amount of tin, and the casing will be slightly yellowing, which is a normal phenomenon. THANK YOU FOR PURCHASING A GALLUNOPTIMAL SOLDERING IRON. Please read the operating instructions before use and keep them in a safe place easily accessible to all users. Turn it on: Plug the power cable into the socket and press Power at the soldering iron. With the +/- keys 9 different temperature setting ranges can be selected. 250°C/482°F, 300°C/572°F, 325°C/617°F, 350°C/662°F, 375°C/707°F, 400°C/752°F, 425°C/797°F, 450°C/842°F, 480°C/896°F

D-06886 Lutherstadt Wittenberg Tel. +49 (0) 3491/6181-0 e-mail: info@loet-shop www.loet-shop.de Während der Aufheizphase blinkt die Power-LED. Unterschiedliche Helligkeit heißt unterschiedliche Leistungsstufe. Error messages H-E and the soldering iron does not heat means the heating element is defective. S-E means the sensor or the control unit is defective. Lötspitzen knife shape 7,5mm needle-sharp 0,2mm chisel form 2,4mm bevelled 0,8 mm pencil point 0,5mm chisel form 3,2mm bevelled 3mm chisel form 1.2mm chisel form 4,6mm bevelled 5mm chisel form 1,6mm chisel form 6,5mm bevelled 6,4mm EU declaration of conformity according to Low-Voltage Directive 2014/35/EC (Nr. 01-20) The manufacturer/ distributor Bräunlich GmbH Am Heideberg 26 06886 Lutherstadt Wittenberg hereby declares that the following product Product designation: GALLUNOPTIMAL Soldering iron Trade name: Trade GALLUNOPTIMAL Sprint65 Model name: GOSprint65 fulfills to the provisions of the Low-Voltage Directive 2014/35/EC - including the changes which applied at the time of the declaration. The following harmonised standards have been applied: "DIRECTIVE OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on the harmonisation of the laws of the Member States relating to electromagnetic compatibility“. The following national or international standards (or parts/clauses of them) and specifications were applied: EN 55014-1:2017 EN 55014-2:2015+A1:2018 EN 61000-3-2:2014 EN 61000-3-3:2013 Place: Lutherstadt Wittenberg Date: 20.4.2020 ______________________________ (Signature) Mr. Tobias Bräunlich, CEO Menu Change Temperatur press +/- short 1°K, long fast change Temperature compensation press +/- short 1°K, long fast change (max.+/-50°C/90°F Temperature unit press +/- short, °C or °F Standby press +/- short, 1=on, 0=off Screw connection Soldering Tip Stainless steel housing Heating element