Forever Redwood BENCH SWING SETS Assembly Instructions Manual

BENCH SWING SETS 866.332.2403 (TOLL FREE); 7am – 7pm Pacific Time, Monday-Saturday

www.ForeverRedwood.com CONTENT OF BOXES - Frame Swing No. 1 2 3 4 5 6 7 Drawing Description Posts Legs Supports Diagonal Supports Roof Supports If ordered Roof Panel If ordered Roof Board If ordered Qty. 2 2 1 4 2 2 1 Note: Part numbers in the Content of Boxes Table are for reference only. These do not match to the numbers marked on the parts sent.

www.ForeverRedwood.com CONTENT OF BOXES – Bench Swing No. 8 9 10 Drawing Description Armrest Seat Backrest Qty. 2 1 1 Note: Part numbers in the Content of Boxes Table are for reference only. These do not match to the numbers marked on the parts sent.

www.ForeverRedwood.com HARDWARE LIST No. A B C D E F G H I J K Drawing Description 3/8´´ x 7´´ Bolts (To attach the posts to the legs). 3/8´´ x 8´´ Bolts (To attach the diagonals supports to the posts and to the support. / To attach the XL roof to the support). 5/16´´ x 3 ½´´ Bolts (To attach the support to the pos.65ts. / To attach the seat and the backrest to the armrest). 5/16´´ x 5 ½´´ Bolts (To attach the roof supports to the posts). 5/16´´ x 4´´ Bolts (To attach the roof panels to the roof supports). 3´´ Deck Screw (To attach the roof panels to the di3agonal supports). 2 ½´´ Deck Screw (To attach the roof board). 4´´ x 3/8´´ Eyebolts (To attach the backrest to the armrest). Quick Links Springs Chains Note: Dimensions of your hardware will vary depending on size.

www.ForeverRedwood.com No 1 2 3 4 5 6 7 8 9 10 DESCRIPTION Posts Legs Supports Diagonal Supports Roof Supports Roof Panel Roof Board Armrest Seat Backrest Note: Part numbers in the Drawing are for reference only. These do not match to the numbers marked on the parts sent.

www.ForeverRedwood.com Option A – Without Roof Step 1: Attach the post (1) to the legs (2) with 3/8´´ x 7´´ bolts (A) and 3/8´´ x 8´´ bolts (B). Each part has a series of numbers that indicate where to attach the part with the corresponding number. Step 2: Put the Quick Links (I) and the Springs (J) in the hanger’s support. After that, put the chains (K). Take a few minutes to adjust the chain height to your preference. 3/8´´ x 8´´ Bolts 1 1 2 Quick Link 2 3/8´´ x 7´´ Bolts

www.ForeverRedwood.com Step 3: Use 5/16´´ x 3 ½´´ bolts (C) to attach the support (3) to the posts. Each part has a series of numbers that indicate where to attach the part with the corresponding number. Step 4: Attach the diagonal supports (4) to the posts and to the support with 3/8´´ x 7´´ bolts (A). Each part has a series of numbers that indicate where to attach the part with the corresponding number. Note: If your Swing Set doesn´t include roof, then go to step 9. 3 5/16´´ x 3 ½´´ Bolts 4 4 3/8´´ x 7´´ Bolts

www.ForeverRedwood.com Option B – With Roof Step 5: Attach the roof supports (5) to the posts with 5/16´´ x 5 ½´´ bolts (D). Each part has a series of numbers that indicate where to attach the part with the corresponding number. Step 6: Attach the roof panels (6) to the roof supports with 5/16´´ x 4´´ bolts (E) and to the diagonal supports with 3´´ deck screws (F). Each part has a series of numbers that indicate where to attach the part with the corresponding number. 5 5 5/16´´ x 5 ½´´ Bolts 6 3´´ Deck Screws 5/16´´ x 4´´ Bolts

www.ForeverRedwood.com Note: If your Swing Set is XL follows this step. Otherwise go to step 8. Step 7: Attach the roof panels (6) to the roof supports with 3/8´´ x 8´´ bolts (B). Each part has a series of numbers that indicate where to attach the part with the corresponding number. Step 8: Use 2 ½´´ deck screws (G) to attach the roof board (7) to the posts. Each part has a series of numbers that indicate where to attach the part with the corresponding number. 2 ½´´ Deck Screws 7 3/8´´ x 8´´ Bolts

www.ForeverRedwood.com Step 9: Attach the seat (9) to the armrests (8) with 5/16´´ x 3 ½´´ bolts (A). Each part has a series of numbers that indicate where to attach the part with the corresponding number. Step 10: Attach the backrest (10) to the armrests with 5/16´´ x 3 ½´´ bolts (A) and 4´´ x 3/8´´ eyebolts (I). Each part has a series of numbers that indicate where to attach the part with the corresponding number. 10 5/16´´ x 4´´ Bolts 9 8 8 5/16´´ x 3 ½´´ Bolts 5/16´´ x 3 ½´´ Bolts 4´´ x 3/8´´ Eye Bolts

www.ForeverRedwood.com Step 11: Finally, use quick links (I) to join the bench swing to the chains (K).

www.ForeverRedwood.com Option A – Without Swing Roof Option B – With Swing Roof

www.ForeverRedwood.com This completes the Swing assembly. Hope you enjoy your set for many decades. If you ever have a problem or a question, don't hesitate to call us (866 332 2403) or email us. We are here to support you.