Brother P-TOUCH CUBE Operation & User’s Manual

Specifications

Brand:	Brother
Category:	Label Maker
Model:	P-TOUCH CUBE (Operation & User’s Manual)
File Type:	PDF
File Size:	—
Pages:	17

Download

Download Brother P-TOUCH CUBE PDF Manual (17 pages)

Read Online

Read the Brother P-TOUCH CUBE Operation & User’s Manual online using the built-in PDF viewer.

Text of the manual

ELECTRONIC LABELING SYSTEM

Thank you for purchasing model PT-P300BT, the P-TOUCH CUBE! Please read this guide, including all Precautions, before using this machine. After reading this guide, keep it in a safe place. NOTE � �� duction of any or all content of this document is prohibited. � �� questionable or incorrect, please contact Brother. � ��me any responsibility for any damage or lost profit arising from the use of this label printer or the label created with this label printer or the disappearance or change of data due to failure, repair or supplies using battery, or any claim from a third party. If you have questions or need information about your Brother product, please visit us online or call. For FAQs, Troubleshooting, and to download software and manuals, visit support.brother.com. To order supplies and accessories, visit www.brothermall.com or call 1-877-552-6255, or visit your local authorized Brother reseller. �� Important Information User’s Guide (English)

Follow these guidelines to avoid the risk of fire, burns, injury, electric shocks, rupture,

overheating, abnormal odors or smoke. � �� Adapter (AD-24ES/AD-24ESA/AD-24ESAW/AD- 24ESA-01/AD-24ESAW-01) for the label printer to prevent any damage or failure. � �� in places of high humidity such as bathrooms. � �� Do not forcibly bend or pull the power cord. Always hold the AC Adapter when disconnecting from the power outlet. � �� handling them with wet hands or spilling beverages on them. � �� ately and stop using the label printer if you notice abnormal odor, heat, discoloration, deformation or anything unusual while using or storing it. � �� of damaging the label printer. � �� rinse your eyes with a large amount of clean water, and then seek medical attention. Follow these guidelines to avoid personal injury, liquid leakage, burns, or heat. � �� swallowed, seek medical attention. � ��int Head immediately after printing. � �� clothes, immediately rinse them with clean water. � �� batteries or combinations of different types, different charging levels, different manufacturers, or different models. Do not insert a battery with its plus and minus ends reversed. � �� Cover. � �� battery charger, and be sure to use them correctly. � �� charger before using the batteries. � �� Safety Precautions Indicates a potentially hazardous situation which, if not avoided, �� Indicates a potentially hazardous situation which, if not avoided, �� WARNING CAUTION

� ��ental conditions, the label may unpeel or become

irremovable, the color of the label may change or be tr�� check the environmental conditions and the material. � �� in accidents or damage to the label printer. � �� back of your car), high humidity, or in dusty locations. � �� he displayed label length on the smartphone or tablet. � ��ter will not detect the end of the tape cassette and will continue operating. � �� higher resolution than the label printer. � �� Trademarks and Copyrights �� States and other countries. The names of other software or products used in this document are trademarks or registered trademarks of the respective companies that developed them. �� Brother Industries, Ltd. under license. Each company whose software title is mentioned in this manual has a Software License Agreement specific to its proprietary programs. Any trade names and product names of companies appearing on Brother products, related documents and any other materials are all trademarks or registered trademarks of those respective companies. ��® Program is to promote the development and popularization of energy-efficient equipment. ��® Partner, Brother Industries, Ltd. has determined that this product meets the ��® specifications for energy efficiency. General Precautions International ENERGY STAR® Qualification Statement

Federal Communications Commission (FCC) Declaration of Conformity

(For USA Only) �� 200 Crossing Boulevard �� must accept any interference received, including interference that may cause undesired operation. Label printer has been tested and found to comply with the limits for a Class B digital device, �� protection against harmful interference in a residential installation. Label printer generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If label printer does cause harmful interference to radio or television reception, which can be determined by turning the label printer off and on, the user is encouraged to try to correct the �� t different from that to which the receiver is connected. � �� or transmitter. Important � �� for a Class B digital device. � �� CAUTION�� supplied antenna. Unauthorize antenna, modification, or attachments could damage the transmitter and may violate FCC regulations.

Before performing any maintenance, power off the label printer. If you use batteries,

remove the batteries and if you use AC Adapter, unplug the AC Adapter. �Cleaning the label printer case Wipe the case with a soft, dry cloth to remove dirt or dust. If the case is heavily soiled, wipe it with a cloth dampened with some water. NOTE Do not use solvents or agents such as benzene, paint thinner, or alcohol, which may damage the label printers surface. �Cleaning the Print Head Dirt on the Print Head may cause blank lines, faint type, or missing characters. Use an optional dedicated Head Cleaning Cassette (TZe-CL3) or use a cotton swab to gently wipe dirt from the Print Head. NOTE Insert the Head Cleaning Cassette in the machine, and press the Power Button twice quickly. Cut the Cleaning Tape after it is fed. If the problem is not solved after repeating this process three times, contact Brother Customer Services. Performing Routine Maintenance WARNING DO NOT TOUCH the Print Head. It is very hot and you may get burned.

Over time, the Cutter Blade may become blunt from repetitive use. If the Cutter does not

cut tape cleanly, rotate and reset the Cutter Board as shown in the illustration (1). If you still have difficulties, replace the Cutter Unit (2). Contact you local authorized Brother reseller or visit brothermall.com to order item TC4, the Cutter Unit. �Replacing the Cutter Unit ��(green) in the direction of the arrows shown in the illustration (2). 2. Install the new Cutter Unit. Unit by pressing the two new pieces down until they lock into place. Check that the package contains the following before using the label printer. If any item is missing or damaged, contact your Brother reseller. Accessories Unpack the PT-P300BT PT-P300BT AC Adapter (AD-24ES/AD- 24ESA/AD-24ESAW/AD-24ESA- 01/AD-24ESAW-01) Starter Tape Cassette Cutter Board Cutter's Edge 1 2

Brother P-TOUCH CUBE Operation & User’s Manual

Specifications

Download

Read Online

Text of the manual

ELECTRONIC LABELING SYSTEM

Follow these guidelines to avoid the risk of fire, burns, injury, electric shocks, rupture,

� ��ental conditions, the label may unpeel or become

Federal Communications Commission (FCC) Declaration of Conformity

Before performing any maintenance, power off the label printer. If you use batteries,

Over time, the Cutter Blade may become blunt from repetitive use. If the Cutter does not

�� for the latest battery recommendations.

try to print.

User’s Guide (English)

Power on the label printer and press the Power Button twice quickly to automatically feed

This label printer requires six (6) AAA alkaline batteries or six (6) fully-charged AAA Ni-MH

Do not set together old and new batteries. Replace all six batteries at the same time.

Make sure your Tape Cassettes display the TZe mark (

Press the Power Button to power on. Hold the Power Button for 0.5 seconds to power off.

�On your mobile device:

7. Print Labels

Other Label Maker Manuals

Brother P-TOUCH CUBE Operation & User’s Manual

Specifications

Download

Read Online

Text of the manual

ELECTRONIC LABELING SYSTEM

Follow these guidelines to avoid the risk of fire, burns, injury, electric shocks, rupture,

� �������������������������������������������������ental conditions, the label may unpeel or become

Federal Communications Commission (FCC) Declaration of Conformity

Before performing any maintenance, power off the label printer. If you use batteries,

Over time, the Cutter Blade may become blunt from repetitive use. If the Cutter does not

���������������������������������� for the latest battery recommendations.

try to print.

User’s Guide (English)

Power on the label printer and press the Power Button twice quickly to automatically feed

This label printer requires six (6) AAA alkaline batteries or six (6) fully-charged AAA Ni-MH

Do not set together old and new batteries. Replace all six batteries at the same time.

Make sure your Tape Cassettes display the TZe mark (

Press the Power Button to power on. Hold the Power Button for 0.5 seconds to power off.

�On your mobile device:

7. Print Labels

Other Label Maker Manuals

� ��ental conditions, the label may unpeel or become

�� for the latest battery recommendations.