Denver DVU-1111 Instruction Manual

BEFORE USE AND RETAIN FOR FUTURE REFERENCE. INSTRUCTION MANUAL DVU-1111 R

and keep this manual for future reference. Carefully observe all warnings, precautions and instructions on the appliance and in the operating instructions, and adhere to them. INSTALLATION Water and Moisture - Do not use powerling operated appliances near water - for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc. Ventilation - The slots and openings in the cabinet are provided for necessary ventilation. To ensure reliable operation of the appliance, and to protect it from overheating, these slots and openings must never be blocked or covered. - Never cover the slots and openings with a cloth or other materials. Accessories - Do not place the appliance on an unstable cart, stand, tripod, bracket, or table. The appliance may fall, causing serious injury to a child or an adult, and serious damage to the appliance,Use only a cart, stand, tripod, bracket, or table recommended. Heat - Do not place the appliance near or over a radiator or heat register, or where it is exposed to direct sunlight. - Never block the slots and openings by placing the appliance on a bed, sofa, rug or other similar surface. - An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. WALL or Ceiling Mounting - If your appliance can be mounted to a wall or ceiling, mount it only as recommended. - Never place the appliance in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided. USE Power Source - This appliance should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of electrical power supplied to your home, consult your dealer or local power company. For those appliances designed to operate from battery power, or other sources, refer to the operating instructions. Grounding or Polarization - This appliance is equipped with a polarized AC power cord Plug(a plug having one blade wider than the other), or with two-wire grounding type plug ) Plug having a second pin for grounding). A follow the instructions below: - For the appliance with a polarized AC power Cord plug: This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing The plug. If the plug should still fail to fit, contact your electrician to have a suitable outlet Installed. Do not defeat the safety purpose of the Polarized plug by forcing it in. Overloading - Do not overload wall outlets, extension cords or convenience receptacles beyond their capacity, since this can result in fire or electric shock. When not in use - Unplug the power cord of the appliance from the outlet when left unused for a long period of time. To disconnect the cord, pull it out by grasping the plug. Never pull the plug out by the cord.

so that it is not likely to be walked on or pinched by items placed upon or against them, paying particular attention to the plugs, receptacles, and the point where the cord exits from the appliance. Lightning - For added protection for this appliance during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the appliance due to lightning and powerline surges. Cleaning - Unplug the appliance from the wall outlet before cleaning or polishing it. Do not use liquid cleaners or aerosol cleaners. Use a cloth lightly dampened with water for cleaning the exterior of the appliance. Clean the appliance only as recommended. . Object and Liquid Entry - Never push objects of any kind into the appliance through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the appliance. ANTENNAS Outdoor Antenna Grounding - If an outdoor antenna or cable system is installed, follow the precautions below. An outoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits. WHEN INSTALLING AN OUTDOOR ANTENNA SYSTEM, EXTREME CARE SHOULD BE TAKEN TO KEEP FROM CONTACTING SUCH POWER LINES OR CIRCUITS AS CONTACT WITH THEM IS ALMOST INVARIABLY FATAL. Antenna Grounding According to the National Electrical code Antenna Lead-in Wire Antenna Discharge Unit (NEC Section 810-20) Grounding Conductors (NEC Section 810-21) Ground Clamps Power Service Grounding Electrode System (NEC Art 250 Part H) Electric Service Equipment Ground Clamp Be sure the antenna system is gorunded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code provides information with respect to proper grounding of the mast and supporting structure, Grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. NEC-NATIONAL ELECTRICAL CODE SERVICE Damage Requiring Service- Unplug the appliance from the wall outlet and refer servicing to qualified service personnel under the following conditions: - When the power cord or plug is damaged or frayed. - The appliance does not appear to operate normally or exhibits a marked change in performance. - This indicates a need for service. Servicing - Do not attempt to service the appliance yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. - If liquid has been spilled or objects have fallen into the appliance. - If the appliance does not operate normally when following the operating instructions, adjust only those controls that are specified in the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the appliance to normal operation. - If the appliance has been exposed to rain or water. - If the appliance has been subject to excessive shock by being dropped, or the cabinet has been damaged. Replacement parts- When replacement parts are required, be sure the service technician has used replacement parts specified that have the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock,or other hazards. Safety Check - Upon completion of any service or repairs to the appliance, ask the service technician to perform routine safety checks)as specified ) to determine that the appliance si in safe operating condition. 1. WARNING：To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall not be placed on apparatus. 2. WARNING: The mains plug is used as the disconnect device, the devices shall remain readily operable.

2 3 4 1 POWER OPEN/CLOSE PLAY/PAUSE FRONT PANEL AND REAR PANEL ILLUSTRATION 1 The back of the DVD player 2 S-Video output jack 5 3 6 Digital signal COAXIAL output jack 7 4 8 VIDEO output jack 1 Y output jack LEFT output jack RIGHT output jack Pb/Cb output jack Pr/Cr output jack 5 REMOTE SENSOR CD DOOR 6 PREV NEXT 7 8 9 10 11 Optical output jack 5.1CH output jack 9 10 11 Scart output jack USB FAUCET MMC/SD/MS FAUCET 9 POWER MS/SD/MMC R PLAY/PAUSE PREV NEXT OPEN/CLOSE USB 1 2 3 4 5 6 7 8 9 SCART FR SR SW CEN SL FL Y Pb/Cb VIDEO L R S-VIDEO Pr/Cr OPTICAL 100-240V~ 50/60Hz POWER SUPPLY:100-240V 50/60Hz POWER CONSUMPTI ON: 15W SERIAL NO.: DVD PLAYER R Model No.:DVU-1111 Websi te:www.den ver -electronics. com STANDBY CONSUMPT ION :<2W

Do not put remote control near to the place with high temperature or moisture Do not put water or any other object on remote control Do not use new and old batteries or different type batteries together Please replace batteries when find remote control is out of work or weak sensitivity. REMOTE CONTROL USB/CARD PLAY/PAUSE RESET

Language Setup Video setup Audio Setup Rating Setup Misc Setup Displaying the setup menu screen The setup preferences. The selected category will provide you the setting details using the following screen. Set on “PARENTAL CONTROL” under "Rating", Press "enter" and input code 8888 (The original factory code is 8888). After input and confirm the code, press “PARENTAL CONTROL” and choose the desired rating. Move below to “SET PASSWORD”, press enter and input the code “8888”,then input the new code, Under “SET PASSWORD”, input again the code, and confirm. The function of “PARENTAL CONTROL” is effective. Main Page Language Subtitle MPEG4Subtitle Audio DVD Menu English Aspect Ratio View Mode TV System Video Output Parental Control : Use Default Settings Screen Saver Language Setup Video Setup Misc Rating Setup Western European Central European 4:3 16:9 Fill Original Auto Fit Pan Scan NTSC PAL Auto Composite S-Video YUV RGB P-Scan Yes No Off On Audio Setup Adult Set Password 1.Kid Safe 2.G 3.PG 4.PG-13 5.PG-R 6.R 7.NC-17 8.Adult Setup Portuguese German Spanish Swedish Denmark English Portuguese German Spanish Swedish Denmark English Portuguese German Spanish Swedish Denmark English Portuguese German Spanish Swedish Denmark Bass management Front Speaker Central speaker Subwoofer speaker Subwoofer speaker Test tones Center delay Surr. Delay Digital output off/on large/small large/small/none large/small/none none/present off/left/right/center/left surr./right surr./subwoofer no delay/0.3m/0.6m/1m/1.4m/1.7m no delay/1m/2m/3m//4m/5.1m off/PCM/all

To close the disc tray, press again. During DVD playback, press TITLE to display the DVD title menu or play the first title. Note: this function is subject to the disc. During DVD playback, press MENU to display the disc menu of the current title. Note: This function is subject to the disc Under the stop mode,Press this button to switch the video of Composite Component YCbCr During VCD/DVD playback, press OSD to display the current time counter position as follows. TITLE MENU V-MODE During VCD/SVCD playback, Press PBC to select the mode of PBC On or PBC Off PBC is: playback control used to navigate VCD/SVCD These keys are used to input the time, as well as title, chapter and track numbers When a CD,DVD,MP3 or VCD is playing (with PBC off), press the 0-10 keys to select a track Directly. When a numeric item is displayed on the screen, press the 0-10 keys to select the desired entry., During MPEG4,DVD, VCD or SVCD playback, press SLOW for slow motion playback. Once you press SLOW, the disc will play at 1/2, 1/4, 1/6 and 1/8 normal speed. Press PLAY to resume normal playback. During MPEG4,DVD, CD,MP3 or VCD playback, press PREV to play the previous chapter,title or track. During MPEG4,DVD, CD,MP3or VCD playback, press NEXT to play the next chapter, title or track. Each press of the REPEAT button will change the repeat mode. During VCD,CD ,MP3playback,there are three modes: repeat Single, repeat All and Off. During MPEG4/DVD,playback,there are three modes: repeat charpter, repeat title and Off. Note:During VCD playback,the PCB mode must be set to Off During playback, press A-B to select point A Press it again to select point B. The player will repeat the section from A to B automatically. Press A-B a third time to cancel A-B repeat and clear points A and B. Note: During MPEG4/CD/VCD/SVCD playback, points A and B must be within the same track. During MPEG4/DVD playback, points A and B can be selected from different chapters. During MPEG4/DVD, CD,MP3 or VCD playback, press REV To in reverse. the disc at 2, 4, 8 and 16 times speed Press PLAY to resume normal playback. During MPEG4/DVD, CD ,MP3 or VCD playback, press FWD to forward.The disc at 2, 4, 8 and 16 Press PLAY to resume normal playback. PBC 0-10 Keys SLOW PREV NEXT REPEAT A-B REV FWD OPEEN CLOSE OSD REMOTE CONTROL OPERATION During playback, press to stop the player and POWER POWER close the power. OPEN/CLOSE OPEN/CLOSE RGB YPbPr 1 2 4 5 3 Press N/P when in STOP mode to select the mode from PAL / AUTO /NTSC . N/P VCD 2.0 Time_ _ :_ _:_ _ / _ _:_ _:_ _ Elapsed time Left time for the current track DVD VIDEO Time_ _ :_ _:_ _ / _ _:_ _:_ _ Elapsed time Left time for the current track times speed.

MUTE Press MUTE to turn off the audio. Press MUTE again to resume normal sound. R/L During VCD/SVCD playback, press R/L repeatedly to select the channel of audio-output: Left / Right / Mix / Stereo. CLEAR Press CLEAR to delete the numbers you have entered. PLAY/PAUSE Press PAUSE during playback to pause playback. Press again to step forward one frame Press PLAY to resume normal palyback. NOTE:the step function is not available during CD playback STOP Press STOP once during playback to stop and hold playback. Press PLAY to resume playback from the point you have pressed STOP. Press STOP twice to stop playback completely. RETURN When the PBC is on, press return ,and you can select once again from the menu displaying. This function is only valiable to VCD. ZOOM During VCD/SVCD/DVD/Divx playback, press ZOOM to magnify the image This function can zoom,can't lessen as follows: Q 1 Q 2 Q 3 Q off STEP When playing PLAY to resume normal play. Press the SETUP button on you remote control to access the setup menu.The setup menu is a Multi-level Use the ▼ or ▲ buttons to select the menu option that you need. Use the and to go back to previous level menu or to enter the next level menu. Press ENTER button to confirm selection. Press SETUP button to exit setup. SETUP Menu. MPEG4/DVD,VCD ,SVCD disc ,press STEP once , the picture changes to next frame ,Press RESET Under the stop mode,Press this key to reset the DVD player to default mode,this will not recover your Password set up.

VOL Press VOL + to increase the volume. Press VOL - to reduce the volume. ANGLE During DVD playback, Press ANGLE to view scenes from different camera angles. Press ANGLE repeatedly to change from one camera angle to another. Note: This function is disc specific. SUBTITLE During DVD playback, Press SUBTITLE repeatedly to select from up to 32 subtitle languages. Note: This function is disc specific (language will vary). LANGUAGE Press LANGUAGE repeatedly to select from up to 8 audio languages/formats during DVD playback. Press repeatedly to select from up to 4 audio languages/formats during SVCD playback. Note: This function is disc specific LANGUAGE PROG 6 Press PROG to get program menu when reading DVD & VCD, then program your wanted songs. (DVD GOTO During MPEG4/DVD,VCD playback, press GOTO, and the menu will display as follow: Title - - - Track - - - Use to select TITLE ,CHAPTER,TIME. Use the number keys to input the desired time or track, then press ENTER to Confirm. During DVD playback, press SEARCH, and the menu will display as follow: Use to select TRACK, TIME or DISC TIME. Use the number keys to input the desired time, title or chapter, then press ENTER to confirm. Note: 1) TIME searches for an exact time in the track. 2) TRACK searches for a desired title or chapter. 3) For some DVD discs, the search function is unavailable. Time --:--:-- Disc Time --:--:-- Cha pter - - - Time --:--:- - DVD: VCD: programme needs TITLE and MENU.) USB/CARD Choose this button to setup the DISC,USB and CARD output mode: DISC: Choose this settings if your DISC output mode is connected to a DISC. USB: Choose this settings if your USB output mode is connected to a USB. CARD: Choose this settings if your CARD output mode is connected to a CARD. The default setting is DISC.Only press STOP buton can you switch to USB or CARD mode when this unit on playbacking disc.

Program: Cancel program: When playing mp3, press right , up or down and enter to choose edit mode, and then Press left and enter to choose the music you want. After that, press right and enter to choose add to program , and then up and enter to choose program view , next press up to choose edit mode and then press Left and enter to choose the music, press play to play the music. After program, press stop twice, and press right to choose edit mode , and then press left to choose the music you d like to cancel and enter to confirm your operation. Press right and enter to choose clear program , then press Right to browse view and return to play in order. 7 Note： If you are playing Mp3 songs or viewing Jpeg pictures, the maximum supported files on each folder is 500. In the case of having more than 500 pictures or songs,then you need to create a new folder and make sure each of them. Do not exceed more than 500 files. For example: if you have 1020 files then you need to create 3 different folders where in 2 of them you will need to record 500, Files in each and the third folder with the remaining 20 files. This way the unit will be able to recognize the folders and thus play all the content .

Check the batteries of remote control and make sure that they are powerful and in good conductivity . Direct the remote control to the IR sensor of the player. Check whether there are some obstacles between the remote control and IR sensor. ABNORMAL FUNCTION OPERATION Turn off the power, and then turn on again. DISC IS LOCKED IN THE TRAY The disc can not be taken out of the tray when the player is reading, so you have to turn off the power and turn on again, and press OPEN/CLOSE key immediately to open the tray. 8 TROUBLE SHOOTING Notes: There are many non-standardized MPEG4/DVD/MP3/WMA/CD-recording procedures and copyprotection procedures now in use, and many different kinds of DVD R,DVD RW ,CD-R and CD-RW blank disks, Therefore,in some cases read errors or read delays may be encountered. This is not a defect of the device. This player not responsible for play ability of MP3 in any case, Due to recording condition such as PC performance, writing software, media ability or etc. For CD-RW of CD-R,it may not be played according to the type of this disc. . . . + + . Type of Disc Audio Format Signal Output Frequency Response S/N radio THD DVD/VCD/HDCD/CD/DVD+R/RW, MPEG4/WMA,MP3, Kodak Picture CD MPEG 1, LAYER 1, LAYER 2 , LAYER 3 Color System: Audio System: Video Output: Audio Output: 2 Vpp CD: DVD: > 92 dB < 0.04% PAL/NTSC/MULTI AC-3 Digital output Audio DAC 16bit/48KHz 1 Vpp (at 75 ohm) 4Hz 20KHz (EIAT) 4Hz 22KHz (48K) 4Hz 44KHz (96K) Output Terminals Power input Dimensions Video (composite) output X 1 S-Video output X 1 Digital coaxial output X1 AC100-240V~ 50/60Hz 15W Body size : Net weight : YPbPr output X 1 5.1ch output X 1 W430XD235XH33mm 2.8KG Digital optical output X1 Scart output X1

at the end of its lifecycle; hand it over at a collection point for the recycling of electrical and electronic appliances. The symbol on the product, the instructions for use or the packing will inform about the methods for disposal.The materials are recyclable as mentioned in this marking. By recycling, material recycling or other forms of re-utilization of old appliances, you are making an important contribution to protect our environment.Please inquire at the community administration for the authorized disposal location. All rights reserved Copyright Denver Electronics Instructions on environment protection