Denver DVR-150 Operation & User’s Manual

Manufactured under license from Dolby Laboratories."Dolby", "Pro Logic"and the double-D symbol are trademarks of Dolby Laboratories.Confidential Unpublished Works. 1992-1997 Dolby Laboratories,Inc.all rights reserved. C DVD + ReWritable

equilateral triangle is intended to alert the user to the presence of uninsulated” dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in theliterature accompanying the appliance. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE, DUE TO THE HIGH RISK OF FIRE OR ELECTRIC SHOCK, DO NOT OPEN THE CABINET DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE.ONLYQUALIFIED SERVICE PERSONNELSHOULD ATTEMPTTHIS. TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, AND FULLY INSERT. POUR EVITER LES CHOCS ELECTRLQUE, INTRODUIRE LALAME LARGE DE LA FICHE DANS LABORNE CORRESPONDANTE DE LAPRISE ET POUSSER JUSQU'AU FOUD. This Digital Video Player employs a Laser System. To prevent direct exposure to the laser beam, do not try to open the enclosure Visible laser radiation emits when open and interlocks are defeated. Use of controls or adjustments or procedures of procedures other than those specified herein may result in hazardous radiation exposure. DO NOT STAREINTO BEAM. To ensure proper use of this product, please read this owner's manual carefully and retain for future reference. Should the unit require maintenance, contact an authorized service location, Only qualified service personnel should remove the cover. WARNING: CAUTIN: ATTENTION: CAUTION: 1 CAUTION RISK OF ELECTRIC SHOCK DO NOTOPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOTREMOVE COVER (OR BACK). NO USER-SERVICEABLE PART INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL Since it is very usual for DVD movies to be released at different times in different regions of the world, all players have region codes and disks can have an optional region code. If you load a disk of a different region code to your player, you will see the region code node notice on the screen. The disk will not play, and should be unloaded. CLASS 1 LASER PRODUCT 3 SYMPTOMS AND CORRECTION Trouble shooting Guide Check the following guide for a possible correction to a problem before contacting customer service. Symptom No power No picture No sound Black & White picture The playback picture Has occasional distortion Brightness is unstable or noises are produced on playback pictures The DVD video player does not start playback MP3 won't read disc or It skips The remote control does not work Properly The recorder cannot record. Some keys do not work The image is distorted. Correction Connect the power plug into the wall outlet securely. Verify the connection from the DVD video output to the TV video input. Then Switch TV to appropriate mode(video 1) Connect the video cable into the jacks securely. Refer to your television owners manual. Connect the audio cables into the jacks securely. Verify the connection from the DVD audio output to the TV or receiver audio input. Then switch to the appropriate source on the receiver. Refer to your Audio amplifier owners manual. Damaged S connector (bent pin) A small amount of picture distortion may appear because of a poor quality video/sound transfer to disc. This is especially true of some discs Manufactured between 1997-1998. Scratched disc Connect the DVD player directly through the TV and not through any other source. What you're viewing is the effect of the copy protection circuitry Required on all DVD players. If you don't have a video input on your TV, you must purchase an Therefore Adapter from your dealer. Place the disc with the graphics side up. Place the disc on the disc tray correctly inside the guide. Make sure the disc is free from scratches & fingerprints. Press the SETUP button to turn off the menu screen. Cancel the parental lock function or change the parental lock level. (The Pre-set password is 3308.) Turn the power off then disconnect the power plug and reinsert it back into the wall. Retry again. Use region 1 discs only. Return disc as the software edition used may not be compatible with the player. Check web site for instruction. Use new editions of software such as Voyetra Audiostation 4, Adaptec's “Easy CD Creator”, NTI or Roxio's Toast Titanium. Make sure MP3 file are not encoded with a variable bit rate such as provided by Real Networks. Replace the batteries with new ones. The type of the disc is wrong, it's not a DVD+RW or DVD+R disc. The disc is recorded full. The disc (DVD+R,DVD+RW) is locked, it should be unlocked. The DVD+R has been finilized. The type of the disc is wrong, it's not a DVD+RW or DVD+R disc. The unit is in record mode or it is recording. The setup of interlaced or Progressive is wrong. Press the I/P button to switch from each other.

hazardous radiation exposure. Please carefully study this manual and always keep it available. There are, however, some installation and operation precautions which You should be aware of. 1.Read Instructions - All the safety and operating instructions should be read before the product is operated. 2.Retain Instructions - The safety and operating instructions should be retained for future reference. 3.Heed Warnings - All warnings on the product and in the operating instructions should be adhered to. 4.Follow Instructions - All operating and use instructions should be followed. 5.Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 6.Attachments - Do not use attachments not recommended by the product manufacturer as they may cause hazards. 7.Water and Moisture - Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. 8.Accessories - Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer. 9.Aproduct and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. 1 0. Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the m a n u f a c t u r e r’s instructions have been adhered to. 11.Power Sources - This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions. Safety Information 12.Grounding or Polarization This product may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way, This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. Alternate Warnings This product is equipped with a three-wire grounding- type plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature, If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug. 13.Power-Cord Protection Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. 14.Protective Attachment Plug The product is equipped with an attachment plug having overload protection. This is a safety feature. See instruction Manual for replacement or resetting of protective device. If replacement of the plug is required, be sure the service technician has used a replacement plug specified by the manufacturer that has the same overload protection as the original plug. 15.Outdoor Antenna Grounding - If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size or grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. 16.Lightning - For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and powerline surges. 17.Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 1 8.Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 19.Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. 20.Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 2 1.Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the product. c. If the product has been exposed to rain or water. d. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. e. If the product has been dropped or damaged in any way, and f. When the product exhibits a distinct change in performance - this indicates a need for service. 22.Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same charateristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. 23.Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform saftey checks to determine that the product is in proper operating condition. 24.Wall or Ceiling Mounting - The product should be mounted to a wall or ceiling only as recommended by the manufacturer. 25. Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves or other products (including amplifiers) that produce heat. FIGURE A EXAMPLE OF ANTENNAGROUNDING AS PER NATIONALELECTRICAL CODE ANTENNA LEAD WIRE ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUD CLAMP POWER SERVICE GROUNDING ELECTRODE SUSTEM (NEC ART 250, PART H) NEC-NA TIONALELECTRICAL CODE S2898A ELECTRIC SERVICE EQUIPMENT GROUND CLAMP 33 Specifications DVD Player TV System NTSC/PAL Compatible Discs DVD+R, DVD, CD, Mp3, DVD+RW,CD-R, CD-RW Recordable discs format DVD+RW, DVR+R Resolution Ratio Greater Than 500 lines Video S/N Ratio 65dB Frequency Response fs (96KHz/24bit) 4Hz - 44KHz:+/-2dB Audio S/N Ratio 95dB Degree of Distortion <0.01% D/A Converter 192KHz/24bit Video Out 1Vp-p S-Video Out Y: 1Vp-p(75 ) C: 0.3Vp-p(75 ); Audio Out 2.0V 5.1 Channel,2Channel mixed Digital Audio Output Optical, Coaxial Connections YUV, SCART, CVBS S-Video Remote Control Transmitter Infrared Ray Signal Range Approximately 15' Power Source 2 AAA Batteries General Power Supply AC 230V 50Hz Consumed Power 30W Standby Power <3W Size (WxHxD) Because its products are subject to continuous improvement, We reserves the right to modify product design and/or specifications without notice and without incurring any obligations. " "

player and recorder. As a DVD player, you will be able to enjoy full length movies with true cinema picture quality, and stereo or multichannel sound (depending on the disc and your playback system). Unique features of this player include Scart & S-video outputs for greater picture clarity. What’s more, as a DVD Video Recorder, it has some of the key features that allow you to record programs conveniently such as: • A complete DVD+RW/DVD+R recorder. • Preset recording • Playback of pre-recorded or user-recorded DVDs and CDs • View, edit and play from a pre-recorded DVD+RW. DIGITAL AUDIO DVD + ReWritable DVD + R MP UNPACKING When shipping the player, the original shipping carton and packing comes in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. It is normal for your changer tray to partially open after you have unpacked the unit. This is a feature designed to allow easier access to disc inside the tray during diagnostics. First check and identify the contents of your player package, as listed below: - DVR-150 - Remote control - RCA cables (3) x2 (1 yellow, 1 red, and 1 white) - Owner’s manual If any item should be damaged or missing, please inform your supplier without delay. Keep the packaging materials as you may need them to transport your player in the future. WHERE TO PLACE YOUR DVD RECORDER 1. Place the unit on a firm, flat surface. 2. When you place this player near a radio or VCR the playback picture may become poor and/or distorted. In this situation, move the DVD video player away from the other units. 3. Keep away from direct sunlight & domestic heating equipment. 4. If placed in a cabinet, please allow at least 2.5 cm (1 inch) of free space around the player for proper ventilation. TO OBTAIN A CLEAR PICTURE This player is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn down, the picture quality will become poor. To obtain a clear picture, we recommend regular inspection and maintenance (i.e. cleaning or parts replacement) every 1,000 hours of use depending on the operating Environment. For details, please contact your nearest dealer. 3 3 Editing EDITING A DISC OF A DVD+RW 1.Insert a DVD+RW on the disc tray. 2.Press DISC OPER to access the disc editing menu. 3. With each icon highlighted by pressing UP/DOWN, the corresponding description of each operation will display on the screen, such as Erase disc, Rename disc, Record a new title, Overwrite disc, etc. 4. Press SELECT to run the operation. Play Rename disc Finalize disc Record a new title DVD+R Display DVD+RW Display Play Erase disc Rename disc Make compatible Record a new title Overwrite disc Lock disc EDITING A DISC OF A DVD+RW OR DVD+R ERASE (only DVD+RW ) Press SELECT to begin erasing. Press the direction keys (UP/DOWN/RIGHT/LEFT) to highlight the one which you want to input, and press SELECT to confirm it. The control bars of the last line in the keyboard is for edit command. Select OK to save the name. Note: lThe maximum length of the title name is up to 9 characters. Play Press SELECT to playback from the disc. Erase disc Rename disc A B C D E F G H I J K 0 1 2 L M N O P Q R S T U V 3 4 5 W X Y Z ( ) _ : ? . 6 7 8 9 Space Caps BkSp Delete Clear Exit OK Disc name W_ Lock disc Finalize disc Make compatible LOCK(only DVD+RW ) When the icon display LOCK, it shows you can lock your current disc. If you have locked Your disc, you can't make any changes any more except play it back, but you can unlock it by UNLOCK. Highligh the icon and press SELECT. It will take a few minutes to finalize the disc. Note: If a DVD+R has been finalized, you can not record or edit DVD+R any more. If you want to make your disc compatible with the other DVD player, you should go on FINALIZE operation. Finalize(only DVD+R) It shows you can make your current disc compatible. If you want to make your disc compatible with the other DVD player. You should go on COMPATIBLE operation. compatible(only DVD+RW)

Safety Precautions……………………..…1 Safety Information………………….…..…2 Introduction……………………………......3 Table of Contents……………………..…...4 Identification of Controls…………..…....5 The remote control...............................7 Connection……………………………….....8 MP3……................................……........12 Playing Back a Disc………………….......13 Playing a Normal Disc…………….…........13 Playing a DVD+RW or DVD+R Disc……...14 General Features……………………....…..14 Locating a Specific Title, Chapter or Track…………………….........16 Playing Repeatedly……..……………......18 Playing in Random Order……………......19 Selecting Camera Angles, Languages & Audio Settings………………….........….20 Playing in a favorite Order………..……...21 Selecting Subtitles…………………...…...22 Using the On-screen Display………………..23 Setting the Parental Lock………………….…24 Customizing DVD Function Settings….…..25 Recording Options…………………………….25 Channel Search……………………..…………..26 Normal Recording…………………..………..…26 One-Touch Record………………….………..…27 Time Record…………………………….....…….28 Editing……………………………………….…...29 Editing a Title of DVD+RW………………..……29 Editing a Disc of DVD+RW or DVD+R……......32 Specifications……………………………..……33 Trouble Shooting Guide…………………...….34 31 Editing TITLE ICON AND SPLIT TITLE EDIT TITLE NAME From the control bar, select the sixth icon, press SELECT . When you want to set the current frame as the icon of the current title which miniature picture will appear in the Index Picture Screen, Press SELECT with displayed. From the control bar, select the seventh icon, press SELECT . When is selected by pressing SELECT, a new title marker will be added to the current point. Index picture Split title 1.Insert a recorded DVD+RW on the disc tray. The Index Picture screen pops up. 2.Use the direction keys to highlight the title which you want to edit. 3.Press RIGHT, the edit bar appears on the screen while playing back. Press UP/DOWN to highlight one icon and SELECT it. 4.From the control bar, select the fourth icon, press SELECT . On the screen, there appears a keyboard: Play title Erase title Edit title Rename title Overwrite title Overwrite disc Press the direction keys (UP/DOWN/RIGHT/LEFT) to highlight the one which you want to input, and press SELECT to confirm it. The control bars of the last line in the keyboard is for editing command. Select OK to save the name. Note: The maximum length of the title name is up to 9 characters. A B C D E F G H I J K 0 1 2 L M N O P Q R S T U V 3 4 5 W X Y Z ( ) _ : ? . 6 7 8 9 Space Caps BkSp Delete Clear Exit OK Title name TITLE_

RECORD STANDBY/ON DVD + ReWritable Identification of Controls 5 FRONT PANEL REAR PANEL 1.STANDBY/ON 2. OPEN/CLOSE 3.RECORD 4.PLAY 5.STOP 6.SOURCE 1. RF SIGNAL INPUT 2. RF SIGNAL OUTPUT 3. COMPOSITE VIDEO INPUT(REAR) 4.S-VIDEO INPUT 5. AUDIO INPUT (REAR LEFT/RIGHT) 6.AUDIO OUTPUT (MIXED) 1 9 10 11 2 3 4 5 6 7 8 7.Digital Vidicon INPUT 8.AUDIO INPUT (FRONT LEFT) 9.AUDIO INPUT (FRONT RIGHT) 10.COMPOSITE VIDEO INPUT(FRONT) 11.S-VIDEO INPUT(FRONT) 1 2 3 4 5 6 8 9 11 12 13 10 7 7. 5.1CH AUDIO OUTPUT 8. COMPOSITE VIDEO OUTPUT 9. S-VI DEO OUTPUT(REAR) 10. DIGITAL AUDIO-COAXIAL OUTPUT 11. DIGITAL AUDIO- OPTICAL OUTPUT 12. SCART OUTPUT 13. COMPONENT OUTPUT 3 Editing CHAPTER EDITING From the control bar, select the fourth icon, press SELECT repeatedly, it will cycle as following: When is selected by pressing SELECT, a new chapter marker will be added to the current point. When is selected by pressing SELECT, the marker of the current chapter will be deleted. When is selected by pressing SELECT, all of the chapter markers will be deleted. Note: From the second icon in the control bar, the above operation can be viewed. If only one chapter is available in the current title, there is only to select. From the control bar, select the fifth icon, press SELECT. When the icon displays , it shows the current chapter is visible, and you can select it to hide it by pressing SELECT. When the icon displays , it shows the current chapter is invisible, and you can select it to unhide it by pressing SELECT. CHAPTER HIDE OR UNHIDE Chapter marker Insert marker Insert marker Insert marker Delete marker Delete marker Delete all markers Delete all markers Hide chapter Unhide chapter

RETURN REPEAT SLOW ZOOM GOTO PS/IS PROG DISPLAY RANDOM 0 / 1 2 3 4 5 6 7 8 9 DVD + ReWritable Identification of Controls REMOTE CONTROL THE INSTRUCTIONS BELOW DESCRIBE THE FUNCTIONS OF THE REMOTE CONTROL 1. OPEN/CLOSE 2. DV 3. TV 4. NUMBERS 5. SETUP 6. DIRECTION (UP/DOWN/LEFT/RIGHT) 7. SELECT 8. MENU 9. TIMER 10.REC/OTR (RECORD/ONE-TOUCH RECORD) 11.PLAY 12.STOP 13.REVERSE 14.PREVIOUS 15.FWD 16. NEXT 17.AUDIO 18.SUBTITLE 19.REPEAT 20.SLOW 21.PROG 22.RANDOM 23.STANDBY/ON 24.SCAN 25.AV(SOURCE) 26.NAVIGATION 27.ADD/CLEAR 28.TITLE 29.DISCOPER ATION 30.EDIT 31. MUTE 32.PAUSE/STEP 33.VOLUME+ 34.CHANNEL+ 35.VOLUME- 36.CHANNEL- 37.RETURN 38.ANGEL 39.DISPLAY 40.ZOOM 41.GOTO 42.PS/IS(PROGRE SSIVE / INTERLACE SCAN) 1 2 23 24 26 28 29 30 31 33 37 39 35 32 34 38 40 41 42 36 27 25 3 4 5 6 7 8 9 11 13 15 17 19 21 14 16 18 20 22 12 10 29 Editing 1.Insert a recorded DVD+RW on the disc tray. The Index Picture screen pops up. 2.Use the direction keys to highlight the title which you want to edit. 3.Press EDIT, the edit bar appears on the screen while playing back. Press RIGHT/LEFT to highlight one icon and enter it, press UP/DOWN to select a sub-item. EDITING A TITLE OF DVD+RW 4.Press EDIT to quit the menu. View current title/total title View current chapter/total chapter Current operation status Chapter editing Select to add one chapter, or delete the current/all chapters, details see the next page. Chapter hide or unhide Select to hide the current chapter,, details see the next page Title face or Title name Select to set the current image played back to the face of the title or select to name the current title, details see the next page. Title Timer Divide current to 2 titles at current point Hide chapter Chapter marker Chapter:01/01 PLAY Title:04/04 Index picture Split title T- Elapsed: 0:00:02 EDIT MODE Hide chapter Chapter marker Chapter:01/01 PLAY Title:04/04 Index picture Split title T- Elapsed: 0:00:02

ADD/CLEAR NAVIGATION SELECT OPEN/CLOSE STANDBY/ON SCAN SETUP TITLE TIMER REC/OTR EDIT AV TV DV DISC OPER MENU CH+ REV PREV FWD NEXT CH- VOL+ VOL- AUDIO SUBTITLE ANGLE RETURN REPEAT SLOW ZOOM GOTO PS/IS PROG DISPLAY RANDOM 0 / 1 2 3 4 5 6 7 8 9 DVD + ReWritable Sorce ONCE Start End Quality Item Editor Confirm DV 0 1/0 1 /0 0 1 4 : 4 1 1 5 : 1 1 SP Cancel Recording Options 1.First setup the clock of your system as “CLOCK SETUP” on page 27. It is recommended to setup your local date and time. 2.Press TIMER, the record scheduler will pop up. TIMER RECORD Note: If you want to delete a scheule, highlight the one, press ADD/CLEAR. 2.Use UP/DOWN to select one schedule, and press SELECT to access Item Editor as below: In each item you can also use direction keys to highlight and press SELECT to choose your setting: Signal input source, details see page 25,step 3. Record frequency, once, daily or weekly. Mm/dd/yy Start time for recording End time for recording Record quality, details see page 26 setup record quality. 3.Select and Confirm to save your setting. 4.In five minutes before it is ready to record the scheduled, it appears a Record Prompt dialog, affirm press Confirm, abolish press CANCEL, and if without operation for a moment it will record the scheduled automatically. Note: In standby mode, your recorder can wake up in 2 minutes before recording. During recording, you can press STOP to suspend the recording. A DVD+RW/DVD+R can record for upto 360 minutes. SELECT TIMER STOP Source Quality Date Start End DV SP 12/01/03 14:41 15:11 Ch057 HQ 12/31/03 12:44 13:05 1 2 3 4 5 6 Record scheduler SP DAILY 07:03 08:33 Rear CVBS W W W APP 5M 1. Push downward and outward the leaf spring to remove the battery compartment cover. 2. Insert two size AA batteries according to the "+" and "-" markings. 3. Make sure the batteries have been properly installed, then close the battery compartment cover. Notes: Do not mix different types together, or old batteries with new batteries. While the remote controller will not be used for an extended period of time, remove the batteries to prevent possible corrosion. To prevent corrosion resulting in damage, remove exhausted batteries immediately. Where the remote controller doesn't appear to operate normally, replace both of the batteries. Typical life for the batteries provided with this product is about 6 months. The life expectance may vary according to the use status. Point the remote controller toward the remote sensor on your DVD home theater center. Upon receipt of the signal from the remote controller, the equipment will operate accordingly. The description in this Manual is based on the buttons on the equipment. You may use the counterparts on the remote controller to do the same. Notes: Do not place this equipment in a place exposed to direct sunlight or strong light source like inverting fluorescent light, or else it may interfere with correct operation of the remote controller. When other similar remote controller is used in the same room, or when this product is used near other equipment using infrared ray, interference with the operation of this remote controller may occur. Do not place any object on the remote controller, or else it may cause unintentional depression of the buttons and waste the batteries unnecessarily. The front of the chassis should not be glazed with color glass, or else it may cause interference with normal operation of the remote controller. Any barrier between the remote controller and remote sensor will inactivate any operation of the remote controller. The operating range between the remote controller and the equipment shall be no more than 5 meters (16 inches). When the operating range becomes shorter, replace the batteries with new ones. Battery Installation Use of the remote controller OPERATING INSTRUCTIONS OF THE REMOTE CONTROLLER OPEN/CLOSE PLAY SOURCE STOP DV INPUT VIDEO S-VIDEO L---- AUDIO -----R RECORD STANDBY/ON DVD + ReWritable 7 MUTE PLAY STOP PAUSE/STEP ADD/CLEAR NAVIGATION SELECT OPEN/CLOSE STANDBY/ON SCAN SETUP TITLE TIMER REC/OTR EDIT AV TV DV DISC OPER MENU CH+ REV PREV FWD NEXT CH- VOL+ VOL- AUDIO SUBTITLE ANGLE RETURN REPEAT SLOW ZOOM GOTO PS/IS PROG DISPLAY RANDOM 0 // 1 2 3 4 5 6 7 8 9 DVD + ReWritable

ADD/CLEAR NAVIGATION SELECT OPEN/CLOSE STANDBY/ON SCAN SETUP TITLE TIMER REC/OTR EDIT AV TV DV DISC OPER MENU CH+ REV PREV FWD NEXT CH- VOL+ VOL- AUDIO SUBTITLE ANGLE RETURN REPEAT SLOW ZOOM GOTO PS/IS PROG DISPLAY RANDOM 0 / 1 2 3 4 5 6 7 8 9 DVD + ReWritable 27 IN OUT TV75 ANTENNA INPUT R VIDEO S-VIDEO L VIDEO OUTPUT AUDIO OUTPUT Y FL SR SW SL C L R FR Pb/Cb Pr/Cr VIDEO S-VIDEO OPTICAL COAXIAL MIXED 5.1CH DIGITAL OUTPUT SCART OUTPUT SCART OUTPUT IN OUT TV75 ANTENNA INPUT R VIDEO S-VIDEO L VIDEO OUTPUT AUDIO OUTPUT Y FL SR SW SL C L R FR Pb/Cb Pr/Cr VIDEO S-VIDEO OPTICAL COAXIAL MIXED 5.1CH DIGITAL OUTPUT SCART OUTPUT SCART OUTPUT Connection CONNECTION FOR AUDIO OUTPUT Enjoy Dolby Pro Logic Surround by connecting an amplifier and speaker system (right and left front speakers, a center speaker, and one or two rear speakers). Dolby Pro Logic Surround Sound (GOOD) Enjoy the dynamic sound of Digital Stereo by connecting an amplifier equipped with a digital audio input and speaker system (right and left front speakers, a center speaker, and one subwoofer speaker, and two rear speakers) Enjoying Digital Stereo Sound (BETTER) Audio cable AMPLIFIER or AMPLIFIER Audio cable (Analog out) Recording Options ONE-TOUCH RECORD 1. During normal recording, press RECORD, the recorder will automatically stop in 30 minutes. 2. The recording time will extend for another 30 minutes with each press. The length of recording time is determined by disc capacity and record quality. With your setting, if it will exceed the capacity of the disc, OTR will be canceled, and switched to normal record. 3. If you want to stop recording, press STOP. HOW TO SWITCH TO PLAYBAK MODE When the recording is suspended, you can press PLAY to switch to normal playback mode. CLOCK SETUP 1. During stop status, press SETUP to access the Setup Menu. 2. Use RIGHT/LEFT to highlight the CLOCK icon as the right figure. 3. With “Date (mm/dd/yy)” highlighted, press SELECT, and input the local date by numbers, press SELECT again. 4. With “Time (hh:mm:ss)” highlighted, press SELECT, and input the local time of numbers, press SELECT again. Note: If you want to cancel, press RETURN. Date(mm/dd/yy) 0 1 / 0 1 / 0 0 1 4 / 2 9 / 5 2 Time(hh:mm:ss) SYSTEM SETUP - CLOCK REC/OTR

NOTE Refer to the manual of the connected TV. Turn off the power and unplug both units before setting up any connections. Signal Input YOUR RECORDER AUDIO Signal Output Connection CONNECTION FOR VIDEO OUTPUT GOOD SCART RGB VIDEO OUTPUT (BEST) BETTER Connect your recorder with the S-Video cable, if the TV has an S-Video input. Do not connect the yellow video cable of using the S-Video cable. The SCART Video OUTPUTput allows you to enjoy the best picture quality from a DVD video disc. COMPOSITE VIDEO S-VIDEO Recording Options CHANNEL SEARCH To record TV programs, you should search TV channels first. 1. Press SCAN to access the TV setup menu. 2. Use the UP/DOWN button to highlight SCAN and press SELECT. It will search channels automatically. During auto-searching, press STOP to cancel searching. 3. To browse the found channels, use the UP/ DOWN button to highlight EDIT and press SELECT to setup it, press UP/DOWN to Name, and you can also input numbers and press SELECT. In the SKIP column, The channel cannot be found will be “YES”. 4. If you want to skip one channel, select the corresponding channel. use UP/DOWN button to highlight the skip and press SELECT, press UP/DOWN to highlight the yes, and press SELECT, 5.use UP/DOWN to highlight the OK and press SELECT. 6. Press SETUP again to exit. Scan channels Modify channel information Sort channel order Channel audio language SCAN EDIT Language A SORT SYSTEM SETUP - CHANNEL SCAN 3% Total found 1 channel. Press STOP to stop scanning Name Manual Scan TV System Sound Mode Fine tune Skip P001/S-008 55.25MHz PAL I Stereo OK CHANNEL EDIT NO LEFT/RIGHT to manual scan, 0~9 or CH+/CH- to Change Channel NORMAL RECORDING SETUP RECORD QUALITY 1. Make connections illustrated as page8 -11. 2. Insert a recordable DVD+RW or DVD+R into the recorder. 3. Press DV. TV or AV to select the input source which you have connected as step 1. F-A/V: Front Audio/Video Input (on the front panel) R-A/V: Rear Audio/Video Input (on the rear panel) F-SV: Front S-Video (on the front panel) R-SV: Rear S-Video (on the rear panel) TV: (you can select it by pressing CHANNEL+/- or input the assigned number of the channel to select your desired one directly) DV: Digital vidicon 4. Press RECORD to start recording. If you want to stop recording, press STOP. If the DVD+RW or DVD+R is new, it will take about three minutes to stop. When is recording, press the STOP button the TV display postprocess please wait a moment . 1. Press SETUP during stop status. 2. Press direction keys (UP/DOW/RIGHT/LEFT) to select. 3. Select default quality. HQ: Perfect quality, nearly 60 minutes in a blank disc SP: Standard play quality, nearly 120 minutes in a blank disc EP: Extend play, nearly 240 minutes in a blank disc SLP: Standard long play, nearly 360 minutes in a blank disc

THIS PLAYER ALLOWS YOU TO CUSTOMIZE THE PERFORMANCE TO YOUR PERSONAL PREFERENCES. DISPLAYING THE SETUP MENU SCREEN The SETUP MENU screen asks you to select a setting category from General, Speaker, Audio and Preferences. The selected category will provide you the setting details using the succeeding screen. 1. Press SETUP during stopstatus. 2. Press direction keys(UP/DOWN/RIGHT/LEFT) toselect category (highlight), then press SELECT. 3. Press SETUP to exit the setup menu. SETUP MENU GENGERAL PLAYBACK RECORD LANGUAGE CHANNEL SCAN CHANNEL SCAN CLOCK GENGERAL PLAYBACK RECORD LANGUAGE CLOCK Date(mm/dd/yy) Time(hh:mm:ss) Main Page screen saver Scart output Video output format Restore factory settings On/Off 16:9/Pan Scan/Letter box Off RAM/LPCM ON/OFF PAL/NTSC OK On/Off F-CS/ F-SV/ RE-CS / RE-SV/ DV/TUNER SLP/EP/SP/HQ English/Spanish/...... English/Chinese/....../Original Off/English/Chinese/......./Original English/Chinese/......./Original 01/01/00 01:15:01 General Setup Playback Setup TV aspect ratio Rating level Digital audio output Closed captions Record Setup Audio chapter market Default source Default quality Language Setup OSD language Menu language Subtitle language Audio language Deltails see page 26 Date& Time Setup CVBS/RGB IN OUT TV75 ANTENNA INPUT R VIDEO S-VIDEO L VIDEO OUTPUT AUDIO OUTPUT Y FL SR SW SL C L R FR Pb/Cb Pr/Cr VIDEO S-VIDEO OPTICAL COAXIAL MIXED 5.1CH DIGITAL OUTPUT SCART OUTPUT SCART OUTPUT Connection CONNECTION FOR AV SIGNAL (A/V REAR INPUT) THE RECORDER ALLOWS YOU TO ENJOY OR RECORD PROGRAMS WITH SIGNAL FROM AV SYSTEMS SUCH AS VCR, DVD PLAYER, ETC. NOTE Refer to the manual of the connected system. Turn off the power and unplug both units before setting up any connections. YOUR RECORDER Video in Video out Audio in Audio out or TV set DVD player Connect your recorder with the S-Video cable, if the Signal Source has an S-Video input. Do not connect the yellow video cable if using the S-Video cable.

ADD/CLEAR NAVIGATION SELECT OPEN/CLOSE STANDBY/ON SCAN SETUP TITLE TIMER REC/OTR EDIT AV TV DV DISC OPER MENU CH+ REV PREV FWD NEXT CH- VOL+ VOL- AUDIO SUBTITLE ANGLE RETURN REPEAT SLOW ZOOM GOTO PS/IS PROG DISPLAY RANDOM 0 / 1 2 3 4 5 6 7 8 9 DVD + ReWritable Setting the Parental Lock YOU CAN USE THE PARENTAL LOCK FUNCTION ONLY WITH DVD EQUIPPED WITH THE PARENTAL LOCK FEATURE SETTING THE PARENTAL LOCK DVD equipped with the parental lock function is rated according to their content. The contents allowed by a parental lock level and the way a DVD can be controlled may vary from disc to disc. For example, if the disc allows it, you could edit out violent scenes unsuitable for children and replace them with more suitable scenes, or lock out playback of the disc all together. 1. Press STOP button twice during playback. 2. Press SETUP during stop status. 3. Highlight the PLAY icon by pressing RIGHT/LEFT. The menu appears on the TV screen. 4. Use UP/DOWN to select Rating Level, press SELECT button. 5. Input your password ofnumbers, highlight OK and press SELECT. The pre-set password is 3308 6. Press SELECT , the sub-menu of Set Rating Level appears, use UP/DOWN to select one rating, press SELECT to confirm it. 7. Highlight OK and press SELECT to save your setting. 8. Press SETUP button to exit setup, press PLAY button to start 1. Follow step 1-6 to select “New”. 2. Enter new password. 3. Re-enter to confirm your new password. 5. Highlight OK and press SELECT to save it. 6. Press SETUP button to exit. TO CHANGE YOUR PASSWORD: SETUP OFF OK NEW SYSTEM SETUP - PLAYBACK 1 Kid Sate 2 G 3 PG 4 PG 13 5 PG-R 6 R 7 NC-17 8 Adult OFF TV aspect ratio Rating level Digital audio output Pan Scan OFF RAW SYSTEM SETUP - PLAYBACK IN OUT TV75 ANTENNA INPUT R VIDEO S-VIDEO L VIDEO OUTPUT AUDIO OUTPUT Y FL SR SW SL C L R FR Pb/Cb Pr/Cr VIDEO S-VIDEO OPTICAL COAXIAL MIXED 5.1CH DIGITAL OUTPUT OPEN/CLOSE PLAY SOURCE STOP DV INPUT VIDEO S-VIDEO L---- AUDIO -----R RECORD STANDBY/ON DVD + ReWritable Connection CONNECTION FOR AV SIGNAL (A/V FRONT INPUT) RECORDER REAR RECORDER FRONT Connect your recorder with the S-Video cable, if the Signal Source has an S-Video input. Do not connect the yellow video cable if using the S-Video cable. NOTE Refer to the manual of the connected system. Turn off the power and unplug both units before setting up any connections. TV set Audio out Video out Video in Audio in or DV input DIGITAL Vidicon

ADD/CLEAR NAVIGATION SELECT OPEN/CLOSE STANDBY/ON SCAN SETUP TITLE TIMER REC/OTR EDIT AV TV DV DISC OPER MENU CH+ REV PREV FWD NEXT CH- VOL+ VOL- AUDIO SUBTITLE ANGLE RETURN REPEAT SLOW ZOOM GOTO PS/IS PROG DISPLAY RANDOM 0 / 1 2 3 4 5 6 7 8 9 DVD + ReWritable Using the On-Screen Display THIS PLAYER ALLOWS YOU TO VIEW STATUS AND DISC INFORMATION ON YOUR TV SCREEN. CHECKING THE OPERATIONAL STATUS With this function, you can view on your TV the following informations: -Play back status - Current title - Current chapter -Current language -Current title Time Press DISPLAY button during DVD playback. CURRENT TITLE/TOTAL TITLE PLAY BACK STATUS CURRENT CHAPTER/TOTAL CHAPTER CURRENT LANGUAGE CURRENT TITLE TIME Normal Play T01/25 C06/21 AU01/03 00:26:48 Normal Play T01/25 C06/21 AU01/03 00:26:48 Normal Play T01/25 C06/21 AU01/03 00:26:48 Normal Play T01/25 C06/21 AU01/03 00:26:48 Normal Play T01/25 C06/21 AU01/03 00:26:48 DISPLAY MP3 & Progressive Scan WHAT IS MP3? WHAT IS PROGRESSIVE SCAN? MP3 refers to a new format of music files available for playback over the internet. The popularity of MP3 allows people to download music from MP3 websites onto ones home computer. Progressive Scan creates a picture with double the scan lines of traditional component video pictures and creates a sharper image. The advantages of progressive scan video output are reduced picture flickering and motion artifacts as well as a sharper image on large screens.

ADD/CLEAR NAVIGATION SELECT OPEN/CLOSE STANDBY/ON SCAN SETUP TITLE TIMER REC/OTR EDIT AV TV DV DISC OPER MENU CH+ REV PREV FWD NEXT CH- VOL+ VOL- AUDIO SUBTITLE ANGLE RETURN REPEAT SLOW ZOOM GOTO PS/IS PROG DISPLAY RANDOM 0 / 1 2 3 4 5 6 7 8 9 DVD + ReWritable Selecting Subtitles THIS RECORDER ALLOWS YOU TO DISPLAY THE SUBTITLES FROM THOSE INCLUDED ON THE DISC ON TO YOUR TV SCREEN. HOW TO DISPLAY SUBTITLES Press the SUBTITLE button during playback to choose one of the subtitles available on the disc, or turn the subtitle off. Note: • Due to the nature of some DVD’s, you may not be able to turn off the subtitles as they will appear on screen automatically. • As you press the SUBTITLE button, the subtitles may not appear immediately during some scenes. • If the subtitles continue to show on your TV even after the DVD has been turned off, please check the closed caption settings on your TV. Good afternoon Bonsoir Buenas tardes SUBTITLE :02/07 GER SUBTITLE :03/07 SPA SUBTITLE :04/07 FRE SUBTITLE :05/07 CHI SUBTITLE :06/07 HUN SUBTITLE :07/07 HIN OFF SUBTITLE :01/07 ENG SUBTITLE MUTE PLAY STOP PAUSE/STEP ADD/CLEAR NAVIGATION SELECT OPEN/CLOSE STANDBY/ON SCAN SETUP TITLE TIMER REC/OTR EDIT AV TV DV DISC OPER MENU CH+ REV PREV FWD NEXT CH- VOL+ VOL- AUDIO SUBTITLE ANGLE RETURN REPEAT SLOW ZOOM GOTO PS/IS PROG DISPLAY RANDOM 0 / 1 2 3 4 5 6 7 8 9 DVD + ReWritable 1. TITLE 01/01/00 12:03:47 SP00:00:20 1. TITLE 01/01/00 12:06:50 HQ00:00:20 1. TITLE 01/01/00 12:08:57 SLP00:00:20 PLAYING A DVD+RW OR DVD+R DISC Index Picture Screen Playing Back a Disc PLAYING A NORMAL DISC 1.Power on your recorder. 2.Insert a DVD disc. 3.Press direction Keys or the number buttons to select the title. 4 Press the SELECT or PLAY button. The DVD video player will start playback from the title selected. 5. To remove the disc, press the OPEN/CLOSE button. Title1 Title 2 Title 4 Title3 OPEN/CLOSE SELECT PLAY Description: 1.The name of the pre-recorded. The default is TITLE. 2.The date and time of the record. 3.Title time of the record. 4.The quality. 5.Length of the record 1. 1. TITLE 2. 01/01/00 3. 12:03:47 4. SP 00:00:20 5.

ADD/CLEAR NAVIGATION SELECT OPEN/CLOSE STANDBY/ON SCAN SETUP TITLE TIMER REC/OTR EDIT AV TV DV DISC OPER MENU CH+ REV PREV FWD NEXT CH- VOL+ VOL- AUDIO SUBTITLE ANGLE RETURN REPEAT SLOW ZOOM GOTO PS/IS PROG DISPLAY RANDOM 0 / 1 2 3 4 5 6 7 8 9 DVD + ReWritable MUTE PLAY STOP PAUSE/STEP ADD/CLEAR NAVIGATION SELECT OPEN/CLOSE STANDBY/ON SCAN SETUP TITLE TIMER REC/OTR EDIT AV TV DV DISC OPER MENU CH+ REV PREV FWD NEXT CH- VOL+ VOL- AUDIO SUBTITLE ANGLE RETURN REPEAT SLOW ZOOM GOTO PS/IS PROG DISPLAY RANDOM 0 / 1 2 3 4 5 6 7 8 9 DVD + ReWritable 1 21 MUTE PLAY STOP PAUSE/STEP ADD/CLEAR NAVIGATION SELECT OPEN/CLOSE STANDBY/ON SCAN SETUP TITLE TIMER REC/OTR EDIT AV TV DV DISC OPER MENU CH+ REV PREV FWD NEXT CH- VOL+ VOL- AUDIO SUBTITLE ANGLE RETURN REPEAT SLOW ZOOM GOTO PS/IS PROG DISPLAY RANDOM 0 / 1 2 3 4 5 6 7 8 9 DVD + ReWritable GENERAL FEATURES All playback operation can be realized by the navigation. During playback, press DISPLAY button twice to access the control bar: The details of every functions is as follows: Press RIGHT/LEFT to highlight one icon and press SELECT to enter , after pressing UP/DOWN to select item, press SELECT. Press DISPLAY again to cancel the control bar. 00:00:00-00:00:00 DVD MODE Normal TRICK Play TITLE 35/41 CHAPTER 01/01 AUDIO 01/02-OTH SUBTITLE Off ANGLE 01/01 T-TIME Playback mode Set your appreciated playback mode such as PROGRAM, RANDOM and various repeat mode. Playback control Control playback by various setting such as FAST FORWARD, FAST REVERSE, PAUSE, STOP, etc. Title Select to choose an available title by inputting numbers. Chapter Select to choose an Available chapter by inputting numbers. Timer Goto the point you want to start from by inputting the time. Audio Select your desired audio setting, if Available. Subtitle Select to choose anavailable subtitle by inputting Numbers. Angle Select your desired camera angle, if Available. MODE Normal TRICK Play TITLE 35/41 CHAPTER 01/01 AUDIO 01/02-OTH SUBTITLE Off ANGLE 01/01 00:00:00-00:00:00 T-TIME Playing Back a Disc PLAYING A DVD+RW OR DVD+R DISC PLAY SELECT UP/DOWN /RIGHT/LEFT OPEN CLOSE STOP 1.Power on your recorder. 2.Insert a DVD+RW or DVD+R disc The index pictures will appear on the screen. 3.Press the OPEN/CLOSE button To open or close the disc tray. 4.Use direction keys(UP/DOWN/RIGHT/LEFT) to highlight the item you desired. 5.Press SELECT or PLAY. To select identified part of movie, or enjoy one(From the start). 6.Stop playback Press the STOP button once to freeze the imagine; press the PLAY button to resume . If playback from the start, press the STOP button twice then press the PLAY button. Note: After finishing playback all titles contained on a DVD+RW or DVD+R disc, it will return to the Index Picture Screen. Playing in a Favorite Order THIS PLAYER ALLOWS YOU TO PROGRAM UP TO 99 ITEMS INTO MEMORY AND THEN PLAY THEM BACK IN THAT ORDER. (PROGRAM/PLAYBACK) HOW TO SET TITLES, CHAPTERS, OR TRACKS IN A FAVORITE ORDER 1. Press DISPLAY button twice to access the control bar. 2. Highlight by pressing RIGHT/LEFT, press SELECT. 3. Use UP/DOWN to select PROGRAM and press SELECT, two volumes will appear on the screen. • The left volume displays all titles on the disc. • The right volume allows you to edit titles in your favorite order. 2. In the left volume, use UP/DOWN to select one title, and press ADD/CLEAR to add it to the right volume. You can also select one chapter by pressing SELECT after highlighting the title. 3. To clear one title you have added in the right volume, highlight the one and then press ADD/CLEAR to clear it. Use RIGHT/LEFT to move the cursor between the volumes. 4. Press PROG to return the PROGRAM play back. 5.Press DISCPLAY button twice to access the control bar Select use UP/DOWN to select NORMAL and press SELECT toresume normal playback. Note: • On the MP3/CD disc, there are some differences on OSD. MODE Normal Edit program play list TITLE TITLE 01 TITLE 02 TITLE 03 TITLE 04 TITLE 05 TITLE 06 TITLE 07 TITLE 08 Favorite/Program TITLE 02 Chapter 01 TITLE 04 Chapter 01 MODE Program PROGRAM ADD/CLEAR

ADD/CLEAR NAVIGATION SELECT OPEN/CLOSE STANDBY/ON SCAN SETUP TITLE TIMER REC/OTR EDIT AV TV DV DISC OPER MENU CH+ REV PREV FWD NEXT CH- VOL+ VOL- AUDIO SUBTITLE ANGLE RETURN REPEAT SLOW ZOOM GOTO PS/IS PROG DISPLAY RANDOM 0 / 1 2 3 4 5 6 7 8 9 DVD + ReWritable MUTE PLAY STOP PAUSE/STEP ADD/CLEAR NAVIGATION SELECT OPEN/CLOSE STANDBY/ON SCAN SETUP TITLE TIMER REC/OTR EDIT AV TV DV DISC OPER MENU CH+ REV PREV FWD NEXT CH- VOL+ VOL- AUDIO SUBTITLE ANGLE RETURN REPEAT SLOW ZOOM GOTO PS/IS PROG DISPLAY RANDOM 0 / 1 2 3 4 5 6 7 8 9 DVD + ReWritable 15 2 MUTE PLAY STOP PAUSE/STEP ADD/CLEAR NAVIGATION SELECT OPEN/CLOSE STANDBY/ON SCAN SETUP TITLE TIMER REC/OTR EDIT AV TV DV DISC OPER MENU CH+ REV PREV FWD NEXT CH- VOL+ VOL- AUDIO SUBTITLE ANGLE RETURN REPEAT SLOW ZOOM GOTO PS/IS PROG DISPLAY RANDOM 0 / 1 2 3 4 5 6 7 8 9 DVD + ReWritable Playing Back a Disc GENERAL FEATURES 1.Fast forward playback Press during normal playback. The speed will cycle with each press as: FF2, FF4,FF16,FF32 or play. Press PLAY to resume normal playback. 2.Fast reverse playback Press during normal playback. The speed will cycle with each press as: FB2, FB4,FB16,FB32 or play. Press PLAY to resume normal playback. 3.Pause playback Press PAUSE/STEP during normal playback to pause and press PLAY to resume normal playback. 4.Frame advance Press PAUSE/STEP during normal playback. One frame is advanced when pressing PAUSE/STEP. Press PLAY to resume normal playback. 5.Slow Press the SLOW button during plsyback The playback speed becomes 1/2, 1/4, 1/8 of the normal speed or normal play when pressing the SLOW button. Note: The above features vary depending on the disc type such as MP3, Audio CD, etc. PLAY PRVERSE/ FORWARD PAUSE/STEP Selecting Camera Angles, Languages & Audio Settings THIS RECORDER ALLOWS YOU TO SELECT FROM SEVERAL DIFFERENT ANGLES AND LANGUAGES. HOW TO CHANGE THE CAMERA ANGLE If the video on the DVD was recorded with multiple angles, you have the option to change the camera angle of the scene you are watching. Press the ANGLE button while playing back a scene recorded with multiple angles. • You may only press the ANGLE button when the angle icon is shown on the DVD display. • Each time you press the ANGLE button, the angle will be changed. Note: • The angle function will not work on DVD video discs that do not contain recorded multiple angles. • During still playback, you are able to change the camera angle. When you resume to normal playback, the camera angle will change to the new settings. • The angle icon indicator will illuminate while playing back a title that contains at least one scene recorded from multiple angles. HOW TO SELECT A LANGUAGE & PLAYBACK AUDIO SETTING This player allows you to select a preferred language and sound recording system from those included on the DVD video disc. 1. Press the AUDIO button during playback 2. Press the AUDIO button repeatedly to cycle through the options Note: • The player returns to the initial default settings when you turn on the player or replace a disc. • The player plays a default sound when unsupported format is selected. ANGEL1 ANGEL2 Selecting the camera angle Selecting a language ANGEL :01/03 AUDIO :02/03 ENG DOLBY AUDIO :03/03 CHI DOLBY AUDIO :01/03 GER DOLBY ANGEL :01/03 ANGEL :02/03 ANGEL :03/03 AUDIO :02/03 ENG DOLBY AUDIO :03/03 CHI DOLBY AUDIO :01/03 GER DOLBY ANGLE AUDIO

ADD/CLEAR NAVIGATION SELECT OPEN/CLOSE STANDBY/ON SCAN SETUP TITLE TIMER REC/OTR EDIT AV TV DV DISC OPER MENU CH+ REV PREV FWD NEXT CH- VOL+ VOL- AUDIO SUBTITLE ANGLE RETURN REPEAT SLOW ZOOM GOTO PS/IS PROG DISPLAY RANDOM 0 / 1 2 3 4 5 6 7 8 9 DVD + ReWritable Playing in Random Order THIS RECORDER ALLOWS YOU TO PLAYBACK TITLES, CHAPTERS WITHIN A TITLE, OR TRACKS IN RANDOM ORDER. PLAYING TITLES IN RANDOM ORDER 1. During normal playback press the RANDAM button. The player will start random playback now. 2. Press RANDOM again to resume normal playback. Note: • The player will go to another chapter or track and start playback, if you press the SKIP button , , during random playback. Random Normal RANDOM Locating a Specific Title, Chapter or Track DVD VIDEO DISCS ARE NORMALLY DIVIDED INTO TITLES AND SUB-DIVIDED INTO CHAPTERS. SIMILARLY, CD'S(AUDIO,HDCD, and MP3) ARE DIVIDED INTO TRACKS. YOU CAN CONVENIENTLY LOCATE ANY SPECIFIC TITLE, CHAPTER,OR TRACK WITH THIS DVD PLAYER. LOCATING A TITLE USING THE TITLE MENU You can locate a specific title using the title menu function, if a DVD video disc contains a title menu. 1.Press the TITLE button On the TV screen, the title menu will appear. 2.Press the / / / button to select the title you want 3.Press the SELECT button This will cause the DVD video player to start playback from chapter 1of the title selected. Chapter1 Title 1 Title 3 Title 2 Title 4 TITLE1 DVD Video Disc TITLE2 Chapter1 Chapter2 Chapter2 Chapter3 SELECT SELECT TITLE Example of a title menu NOTICE There are some disc that does not respond to this function. If different instructions appear on the TV screen, follow those instructions. The instructions above are describe the basic procedure, but procedures may depend on the contents of the DVD video disc. This player allows you to locate consecutive chapters or tracks. Press the SKIP or button repeatedly to display the requested chapter or track The player starts playback from the selected chapter or track. How to locate proceeding chapters or tracks When you press the SKIP button , the player starts playback from the beginning of the preceding chapter or track. How to locate succeeding chapters or tracks When you press the SKIP button , the player starts playback from the beginning of the succeeding chapter or track.. Notice: on some discs the titles may not display the sub-divided chapters. LOCATING A SPECIFIC CHAPTER OR TRACK PREV NEXT Audio CD Track1 Track2 Track3 Track4 Track5

ADD/CLEAR NAVIGATION SELECT OPEN/CLOSE STANDBY/ON SCAN SETUP TITLE TIMER REC/OTR EDIT AV TV DV DISC OPER MENU CH+ REV PREV FWD NEXT CH- VOL+ VOL- AUDIO SUBTITLE ANGLE RETURN REPEAT SLOW ZOOM GOTO PS/IS PROG DISPLAY RANDOM 0 / 1 2 3 4 5 6 7 8 9 DVD + ReWritable 17 Playing Repeatedly 1 MUTE PLAY STOP PAUSE/STEP ADD/CLEAR NAVIGATION SELECT OPEN/CLOSE STANDBY/ON SCAN SETUP TITLE TIMER REC/OTR EDIT AV TV DV DISC OPER MENU CH+ REV PREV FWD NEXT CH- VOL+ VOL- AUDIO SUBTITLE ANGLE RETURN REPEAT SLOW ZOOM GOTO PS/IS PROG DISPLAY RANDOM 0 / 1 2 3 4 5 6 7 8 9 DVD + ReWritable Locating a Specific Title, Chapter or Track If a DVD video disc contains title numbers, you can locate a specific title by directly selecting a title number. 1.Press GOTO during playback. The control bar will display on the screen. LOCATING A TITLE 2 To select your desired Chapter, input the number of a vailable chapter, then press SELECT to confirm it. 3 To select your desired title, press GOTO to highlight the icon and input the number of a vailable title, then press SELECT. 4.If you want to start playback from some point, press GOTO to highlight the icon ,and input the time, then press SELECT. Note: The function is invalid on MP3 disc. For CD disc, GOTO is used for track/time selection. GOTO SELECT TIME-: --:-- TIME-: --:-- TITLE:-- TITLE:-- CHAPTER--- CHAPTER- -2 e.g. To select Chapter2 THIS RECORDER ALL ALLOWS YOU TO PLAYBACK A SPECIFIC TITLE, CHAPTER, TRACK, OR SEGMENT REPEATEDLY.(TITLE REPEAT, CHAPTER/TRACK REPEAT,A-B REPEAT) 1.Press the REPEAT button during playback. The repeat mode changes, each time you press the REPEAT Button. HOW TO REPEAT A TITLE, CHAPTER, OR TRACK 1 Press DISPLAY button twice to access the control bar. 2 Highlight by pressing RIGHT/LEFT, press SELECT. 3 Use UP/DOWN to select and press SELECT at the beginning of the segment in which you want to repeat playback(point A). 4.Press SELECT again at the end of the segment( point B) The player will automatically return to point A and Start to repeat playback to the selected segment(A-B) 5.Highlight by pressing RIGHT/LEFT, press SELECT. Use UP/DOWN to select NORMAL and press SELECT to resume normal playback. Note: There are two repeat modes for MP3/CD disc. On CD disc, they are track repeat and disc repeat, and on MP3 disc, they are repeat song and repeat directory. HOW TO REPEAT A SPECIFIC SEGMNET REPEAT D-RPT NORMAL T-RPT C-RPT Repeats the same chapter. Repeats the same title. Repeats the whole disc. Resumes normal playback. MODE Mormal A-B Repeat MODE A-B Repeat Normal A-B Repeat Chapter Repeat Title-Repeat Disc Repeat 00:00:00-00:00:00 DVD MODE Normal TRICK Play TITLE 35/41 CHAPTER 01/01 AUDIO 01/02-OTH SUBTITLE Off ANGLE 01/01 T-TIME Normal A-B Repeat Frack-Repeat Disc-Repeat Program Random 00:01:50-01:25:40 VCD MODE Normal TRICK Play TRACK 01/01 AUDIO Stereo PBC PBC on TR-TIME