Alpine OWNER'S MANUAL Owner's Manual

This product use software that can be updated through a USB flash drive. Download the software from the Alpine website and update the product using the USB flash drive. Updating this product Check the Alpine website for details on updating. http://www.alpine-asia.com http://www.alpine.com.au Important information on the software About the software licence of the product The software installed in the product contains open-source software. See the following Alpine website for details on the open source software. http://www.alpine.com/e/oss/download About the Supported ...

Incoming calls are announced by the received call ring tone and a displayed message (PHONE No., etc.). 1 An incoming call triggers the ringtone and an incoming call display. 2 Touch incoming call notification screen. The call starts. • During a call, the audio for the current mode on the unit is muted. After calling, playback will resume. • When the caller’s number is transmitted to the system, if the caller’s name is stored in the phone book, the name is displayed. If the name is not stored, the number is displayed. When neither the name or the number is unavailabl ...

The distance guidance mark represents the distance to a flat road surface. Therefore in the case of an upward slope behind the car, the distance guides are displayed closer to the rear bumper than the actual distance. For example, if there is an obstacle on the upward slope, it may appear farther away than its actual position. Also, an error may occur between the guidance and the actual path of the car on the road surface. When there is a steep downward slope behind the car (example) In the case of a downward slope behind the car, the d ...

Video Main Screen Using the Function button on the Audio/Visual main screen. Swipe to the right or left to change to the Function mode. Radio main screen example About Basic Operation for List Screen Basic operations on the Setup list screen and the Search list screen. How to display on the list screen differs depending on the selected item. Switches to the previous screen. Item select button Closes the window. Displays the next list page. • When the next selection item does not exist, the list item is not displayed. Lists items for selection � ...

Turning the selected guide off. 1 Touch [On/Off]. The currently selected guide will turn off. 2 To turn the guide on, touch [On/Off] again. • Guides that are turned off are still adjustable. Returning Guides to Default 1 Touch [Default]. A message window will appear. 2 Touch [OK]. Adjusted values will return to default settings. You can set whether to display the rear camera image when the gear lever is moved to the reverse (R) position while the unit is turned off. You can select this item only when Camera Select is “Rear.” Settin ...

display various functions of your vehicle.*1 Available functions differ depending on your vehicle. For details, refer to your vehicle’s instruction manual. Available Main Functions • You can check the air conditioner settings on the Climate screen.*2 • You can check for obstacles on the Parking Sensor screen.*2 • You can adjust various settings for your vehicle from the unit. *1 Prerequisite is a compatible CAN-Interface, e.g. from the APF-X3xxx series. *2 When the Interruption function is set to “On,” the scr ...

When you turn this setting to “On” and set a password, password input is required when the system is connected to a battery and turned on for the first time. Setting item: Security Code Setting contents: Off (Initial setting) / On Setting the password 1 Touch the checkbox “Off” ( ) of the Security Code. 2 After the confirmation message appears, touch [OK]. The password setting screen is displayed. 3 Enter a password, then touch [OK]. • Enter the 6-digit number. • Input numbers are displayed as “*”. • Touch ...