Alarm.Com ADC-V820 Installation Manual

Required items for installation: • ADC-V820 camera and power adapter (included) • Broadband (Cable, DSL, or Fiber-optic) Internet connection with router • Personal computer or web-capable tablet • Login/password for the customer’s Alarm.com account • An Ethernet cable Install the cameras: 1. Connect the camera’s AC adapter and plug it into a non-switched outlet. 2. Use a standard Ethernet cable to connect the video device to the network router. For more information about connecting video devices using PoE, see Connect a video device using Power-Over-Ethernet (PoE). 3. Wait a few minutes for the camera to connect to the Internet. 4. Add the video device to the account using either MobileTech, or entering the following web address: www.alarm.com/addcamera to access the Customer Website. 5. Follow the on-screen instructions to add and set up the video device. For more information about adding a camera to an account, see Enroll the video device to the customer account. 6. Once the camera is enrolled on the account, power down the camera and install it in its final location using the included hardware. https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Video_Devices/Indoor_Dome_ADC-V820/Indoor_Dome_(ADC- Updated: Wed, 10 Apr 2019 17:47:56 GMT 1

2

Local network and internet connection with Alarm.com IP. Local network connection Local network connection with local IP address, no internet. Note: If the LED does not go to a solid green after a few minutes, see Camera LED is blinking green. Power on, or no network connection Power on, system booting up typically 60-90 seconds. If solid red for longer than 60-90 seconds, then there is no local or Internet connection. Firmware update Camera firmware update is in progress. Factory reset The camera is restoring to factory default settings. Caution: If the camera is already installed, it may need to be removed from the Alarm.com account and re- added after a factory reset. To perform a factory reset, press and hold the reset button for about 10-15 seconds. https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Video_Devices/Indoor_Dome_ADC-V820/Indoor_Dome_(ADC- Updated: Wed, 10 Apr 2019 17:47:56 GMT 3

Training, see How can I access Academy Training?. https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Video_Devices/Indoor_Dome_ADC-V820/Indoor_Dome_(ADC- Updated: Wed, 10 Apr 2019 17:47:56 GMT 4