Datalogic P2x-Series Product Reference Manual

Industrial Smart Camera

40012 Calderara di Reno (BO) Italy Tel. +39 051 3147011 Fax +39 051 3147205 © 2021 Datalogic S.p.A. and /or its affiliates All rights reserved. Without limiting the rights under copyright, no part of this documentation may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means, or for any purpose, without the express written permission of Datalogic S.p.A. and/or its affiliates. Owners of Datalogic products are hereby granted a non-exclusive, revocable license to reproduce and transmit this documentation for the purchaser's own internal business purposes. Purchaser shall not remove or alter any propri- etary notices, including copyright notices, contained in this documentation and shall ensure that all notices appear on any reproductions of the documentation. Electronic versions of this document may be downloaded from the Datalogic website (www.datalogic.com). If you visit our website and would like to make comments or suggestions about this or other Datalogic publications, please let us know via the "Contact" page. Disclaimer Datalogic has taken reasonable measures to provide information in this manual that is complete and accurate, how- ever, Datalogic shall not be liable for technical or editorial errors or omissions contained herein, nor for incidental or consequential damages resulting from the use of this material. Datalogic reserves the right to change any specification at any time without prior notice. Trademarks Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S.A. and the E.U. Impact, P2x-Series™, Vision Program Manager (VPM), and Control Panel Manager (CPM) are trademarks of Datalogic S.p.A. and/or its affiliates, registered in many countries, including the U.S. and the E.U. All other trademarks and brands are property of their respective owners. Patents See www.patents.datalogic.com for patent list. This product is covered by one or more of the following patents: Utility patents: EP1172756B1, EP2517148B1, EP2616988B1, EP2649555B1, EP3016028B1, EP3092597B1, IT1404187, JP5947819B2, US10229301, US6808114, US6877664, US6997385, US7387246, US7433590, US7433590, US8245926, US8888003, US8915443, US9122939, US9349047, US9361503, US9396404, US9495607, US9798948, US10095951, US10133895, US10229301, US10540532, ZL200980163411.X, ZL201080071124.9, ZL201180044793.1, ZL201280010789.8

TABLE OF CONTENTS PREFACE ...................................................................................................................V About this Manual ............................................................................................................ v Manual Conventions ............................................................................................................................v Technical Support ............................................................................................................ v Support Through the Website .............................................................................................................v Reseller Technical Support ................................................................................................................vi Compliance ..................................................................................................................... vi Power Supply .....................................................................................................................................vi EMC Compliance .................................................................................................................................vi CE Compliance ....................................................................................................................................vi Warning ..............................................................................................................................................vi Led Safety ..........................................................................................................................................vii Handling ........................................................................................................................ vii CHAPTER 1. INTRODUCTION.....................................................................................1 General View ...................................................................................................................1 P2x-Series™ (14 LEDs ILLUMINATOR) .............................................................................................1 P2x-Series™ (36 LEDs ILLUMINATOR) .............................................................................................2 Heatsink ..............................................................................................................................................2 Product Description ............................................................................................................................3 Indicators and Keypad Button ....................................................................................................6 Lighting System and Lens Notes for 14 and 36 LEDs illuminators .........................................7 Necessary camera components .................................................................................................8 Basic components .......................................................................................................................9 Accessories .................................................................................................................................9 CHAPTER 2. RAPID CONFIGURATION ......................................................................11 STEP 1- Connect the system ........................................................................................... 11 CBX500/CBX800 Pinout for P2x-Series™ ................................................................................12 STEP 2 – Install the lens and illuminator ......................................................................... 13 STEP 3 – Mount and position the camera ......................................................................... 18 14 LEDs Illuminator ..........................................................................................................................18 36 LEDs Illuminator ..........................................................................................................................18 STEP 4 – Focus the camera ............................................................................................ 20 CHAPTER 3. INSTALLATION ...................................................................................21 Package contents ........................................................................................................... 21 Mechanical Dimensions .................................................................................................. 22 P2x-Series™ (14 LEDs ILLUMINATOR) ...........................................................................................22 P2x-Series™ (36 LEDs ILLUMINATOR) ...........................................................................................25 Mounting and positioning the P2x-Series™ ..................................................................... 29 Mounting Brackets ............................................................................................................................29 CHAPTER 4. ELECTRICAL CONNECTIONS................................................................31 On board Gigabit Ethernet Interface ................................................................................ 31 On-board Gigabit Ethernet Connector ..............................................................................................31 RS232 Interface ............................................................................................................. 32 RS485 Full-Duplex Interface ....................................................................................................32

Auxiliary RS232 Interface .........................................................................................................32 Terminal Block connections ............................................................................................33 Power, COM and I/O Connector ........................................................................................................33 CBX Electrical Connections .............................................................................................34 Power Supply .................................................................................................................36 Inputs ............................................................................................................................36 EXTERNAL TRIGGER INPUT CONNECTIONS USING P2x-Series™ POWER ...................................37 EXTERNAL TRIGGER INPUT CONNECTIONS USING EXTERNAL POWER ......................................38 INPUT 2 CONNECTIONS USING P2x-Series™ POWER ...................................................................39 INPUT 2 CONNECTIONS USING EXTERNAL POWER ......................................................................40 Outputs ..........................................................................................................................40 OUTPUT 1 AND 2 CONNECTIONS USING P2x-Series™ POWER ...................................................42 OUTPUT 1 AND 2 CONNECTIONS USING EXTERNAL POWER ........................................................42 OUTPUT 3 CONNECTIONS USING P2x-Series™ POWER (CBX500 Only) .......................................43 OUTPUT 3 CONNECTIONS USING EXTERNAL POWER (CBX500 Only) ...........................................43 OUTPUT 3 CONNECTIONS USING P2x-Series™ POWER (CBX800 Only) .......................................44 OUTPUT 3 CONNECTIONS USING EXTERNAL POWER (CBX800 Only) ...........................................44 Outputs ..............................................................................................................................................44 CHAPTER 5. SOFTWARE CONFIGURATION .............................................................. 46 Impact System Requirements .........................................................................................46 Startup ..........................................................................................................................46 Calibration .....................................................................................................................51 Partial Scan ...................................................................................................................51 CHAPTER 6. ILLUMINATORS .................................................................................. 52 Standard Illuminators .....................................................................................................52 14 LEDs chains ..................................................................................................................................52 36 LEDs chains ..................................................................................................................................52 Cover .............................................................................................................................53 Lightning .......................................................................................................................54 Lightning Techniques .......................................................................................................................54 CHAPTER 7. MAINTENANCE................................................................................... 56 Cleaning ........................................................................................................................56 Troubleshooting .............................................................................................................56 General Guidelines ............................................................................................................................56 CHAPTER 8. TECHNICAL FEATURES....................................................................... 58 Optical sensor response ...................................................................................................................60 GLOSSARY............................................................................................................... 61

PREFACE ABOUT THIS MANUAL This Product Reference Guide (PRG) is provided for users seeking advanced technical information, including connection, programming, maintenance and specifications. The Quick Reference Guide (QRG) and other publications associated with this product can be downloaded free of charge from the website listed on the back cover of this manual. Manual Conventions The following conventions are used in this document: “User” refers to anyone using a P2x-Series™ camera. “Camera” refers to the P2x-Series™ camera. “You” refers to the System Administrator or Technical Support person using this manual to install, configure, operate, maintain or troubleshoot a P2x-Series™ camera. The symbols listed below are used in this manual to notify the reader of key issues or procedures that must be observed when using the reader: TECHNICAL SUPPORT Support Through the Website Datalogic provides several services as well as technical support through its website. Log on to (www.datalogic.com). For quick access, from the home page click on the search icon , and type in the name of the product you’re looking for. This allows you access to download Data Sheets, Manu- als, Software & Utilities, and Drawings. Hover over the Support & Service menu for access to Services and Technical Support. NOTE Notes contain information necessary for properly diagnosing, repairing and operating the camera. CAUTION The CAUTION symbol advises you of actions that could damage equipment or property. WARNING The WARNING symbol advises you of actions that could result in harm or injury to the person performing the task.