Datapath Image2K Quick Start Manual
Text of the manual
Engineering the world’s best visual solutions
Quick Start Guide
Image2K
Image4K
Image Graphics Cards
Thank you for purchasing a Datapath Image
Graphics card. The aim of this document is
to quickly guide you through the process of
initial setup.
For detailed information, the User
Guide can be downloaded from
www.datapath.co.uk.
CONTENTS
Your packing box contains the following items:
Your Image graphics card
Image2K - DGC223 or,
Image4K - DGC215
For latest drivers go to www.datapath.co.uk.
Note: All Products are static sensitive and
are packed in antistatic materials. Please
keep the card in its packaging until you are
ready to install.
STEP 1 - HARDWARE
INSTALLATION
Installing your Image graphics card is a simple
process. In summary, the following steps need to
taken to be up and running in a few minutes:
1. Ensure that the Windows® System is set to standard
single screen VGA resolution.
2. Locate a vacant PCI Express (x8 electrical, x16
physical) slot on the motherboard and remove
the blanking plate. Retain all screws.
3. Ensure the required software has been installed
(see software installation section).
4. Right click on the desktop and select the Display
Driver Configuration Tool (DDCT) from the menu.
Follow the instructions to configure your displays.
Full details of the DDCT can be found in application
help file and the Image card User Guide located on
the Datapath website.
www.datapath.co.uk
Image2K
Image4K
Image Graphics Quick Start Guide
STEP 2 - SOFTWARE
INSTALLATION
Download the required driver and install from the
Datapath website, and follow the Installation Wizard
instructions as prompted.
WDDM is the driver architecture used by modern
Windows Operating Systems such as Windows
10. The Datapath WDDM driver currently provides
support for up to 8 Image2K in a system or 6
Image4K cards.
Do not install both the Image2K and Image4K cards
in the same system.
COPYRIGHT STATEMENT
© Datapath Ltd., England 2020.
Datapath Limited claims copyright on this
documentation. No part of this documentation
may be reproduced, released, disclosed, stored in
any electronic format, or used in whole or in part for
any purpose other than stated herein without the
express permission of Datapath Limited.
Whilst every effort is made to ensure that the
information contained in this documentation is
correct, Datapath Limited make no representations
or warranties with respect to the contents thereof,
and do not accept liability for any errors or omissions.
Datapath reserves the right to change
specification without prior notice and cannot
assume responsibility for the use made of the
information supplied. All registered trademarks
used within this documentation are acknowledged
by Datapath Limited.
Image Graphics Quick Start Guide
Datapath UK and
Corporate Headquarters
Bemrose House, Bemrose Park,
Wayzgoose Drive, Derby,
DE21 6XQ, United Kingdom
+44 (0) 1332 294 441
[email protected]
Datapath North America
2490 General Armistead Avenue,
Suite 102, Norristown,
PA 19403, USA
+1 484 679 1553
[email protected]
Datapath France
+33 (1)3013 8934
[email protected]
Datapath Germany
+49 1529 009 0026
[email protected]
Datapath China
+86 187 2111 9063
[email protected]
Datapath Japan
+81 (0)80 3475 7420
[email protected]
www.datapath.co.uk
QSG-IGC-EN3-V1.1
