Charder MS5440 Operation & User’s Manual

power to confirm that battery is correctly installed. Using Rechargeable Battery (optional) The rechargeable battery should be recharged at least once every 3 months, regardless of if the device has been used. Battery can be charged by plugging device's exclusive adapter into AC Connector Port. After a long period in storage (e.g. >3 months), the battery should run a full cycle (charge/discharge) to allow it to restore full capacity. Ensure rechargeable battery housing is installed and inserted properly into the compa ...

Definitions Stable symbol: Indicate that weight is stable. Zero symbol: Weight is at zero Minor weight: Weight under zero. Low battery: Battery needs to be charged or replaced. ...

No.103, Guozhong Rd., Dali Dist., Taichung City 41262 Taiwan Tel: +886-4-2406 3766 Fax: +886-4-2406 5612 Website: www.chardermedical.com E-mail: [email protected] Copyright© Charder Electronic Co., Ltd. All rights reserved. This user manual is protected by international copyright law. All content is licensed, and usage is subject to written authorization from Charder Electronic Co., Ltd. (hereinafter Charder) Charder is not liable for any damage caused by a failure to adhere to requirements stated in this manual. Charder reserves the right ...

The MS5440 Chair Scale is intended for use in the electromagnetic environment specified below. The customer or the user of the device should assure that it is used in such an environment. Immunity test IEC 60601 test level Compliance level Electromagnetic environment-guidance Electrostatic discharge(ESD) IEC 61000-4-2 ± 8 kV contact ± 2 kV, ± 4 kV, ± 8 kV, ± 15 kV air ± 8 kV contact ± 2 kV, ± 4 kV, ± 8 kV, ± 15 kV air Floors should be wood, concrete or ceramic tile. If floors are covered with synthetic material, th ...

power to confirm that battery is correctly installed. Using Rechargeable Battery (optional) The rechargeable battery should be recharged at least once every 3 months, regardless of if the device has been used. Battery can be charged by plugging device's exclusive adapter into AC Connector Port. After a long period in storage (e.g. >3 months), the battery should run a full cycle (charge/discharge) to allow it to restore full capacity. Ensure rechargeable battery housing is installed and inserted properly into the compa ...

the PC. VII. Wireless Connection If the device has the wireless or bluetooth module installed, the indicator can transmit measurement results wirelessly. Please see Charder wireless or bluetooth software instructions for details. ...

A. Device Information Model MS5440 Display DP3710 Weight Measurement Capacity 300 kg x 0.1 kg Accuracy ±0.15 kg OIML Class III LCD Screen 1.0-inch LCD screen (5 1/2 digits) Dimensions Overall 690(W) x 1235(D) x 945(H) mm Seat Height: 540mm Width: 560 mm Back Height: 450 mm Armrest Height: 700 mm Device Weight 23 kg Key Functions On/Off, Zero, Print, BMI, Hold, Pre-Tare, Tare, Clear, Enter, 0~9, M1-5 Power Supply Rechargeable battery pack (optional) or 6 AA batteries / adapter Operation Temperature & Humidity 0℃~40℃ 15% / 85% RH Optional Accessories Thermal ...

required to correct weighing accuracy 3. Connection failure for data transmission to PC or printer  Ensure wires are connected correctly between indicator and PC or printer  Ensure printer is supplied with power. Ensure PC software is set up properly as indicated in this manual Distributor support required If the following errors occur, we recommend contacting your local Charder distributor for repair or replacement services: 1. Device will not power on  Faulty on/off key  Broken or damaged wires causing sh ...