Charder MS2504 Operation & User’s Manual

The MS2504 Stand-on Floor Scale is intended for use in the electromagnetic environment specified below. The customer or the user of the device should assure that is used in such an environment. Immunity test IEC 60601 test level Compliance level Electromagnetic environment-guidance Conducted RF IEC 61000-4-6 Radiated RF IEC 61000-4-3 3 Vrms 150 KHz to 80 MHz 6 V in ISM bands between 0,15 MHz and 80 MHz 80 % AM at 1 kHz 3 V/m 80MHz to 2,7 GHz 3 Vrms 150 KHz to 80 MHz 6 V in ISM bands between 0,15 MHz and 80 MHz 80 % AM at 1 ...

Guidance and manufacturer’s declaration-electromagnetic emissions The MS2504 Stand-on Floor Scale is intended for use in the electromagnetic environment specified below. The customer or the user of the device should assure that it is used in such an environment. Emission test Compliance Electromagnetic environment-guidance RF emissions CISPR 11 Group 1 The device uses RF energy only for its internal function. Therefore, its RF emissions are very low and are not likely to cause any interference in nearby electronic equipment. RF emissions CISPR ...

lawns. Relocate device to location with solid, stable floor  If the steps above cannot resolve the problem, re-calibration may be required to correct weighing accuracy 3. Connection failure for data transmission to PC or printer  Ensure wires are connected correctly between indicator and PC or printer  Ensure printer is supplied with power. Ensure PC software is set up properly as indicated in this manual Distributor support required If the following errors occur, we recommend contacting your local Charder dis ...

A. Setting Time & Date Press and hold [HOLD] key for 3 seconds to enter Time Setting mode. Example: Inputting 2008, Dec 25, 8:00am Year Setting Enter year using numeral keys 0-9. Press [HOLD] key once completed to proceed to month & date setting. Month & Day Setting. Enter month, followed by day using numeral keys 0-9. Ex: December 25th is "12.25". Input 1-2-2-5. Press [HOLD] key once completed to proceed to time setting. Time Setting Enter time (24hr format) using numeral keys 0-9. Ex: 08:00am is input by pressing 0-8-0-0. Press [HOLD] key once completed to confirm time set ...

The MS2504 Stand-on Floor Scale is intended for use in the electromagnetic environment specified below. The customer or the user of the device should assure that is used in such an environment. Immunity test IEC 60601 test level Compliance level Electromagnetic environment-guidance Conducted RF IEC 61000-4-6 Radiated RF IEC 61000-4-3 3 Vrms 150 KHz to 80 MHz 6 V in ISM bands between 0,15 MHz and 80 MHz 80 % AM at 1 kHz 3 V/m 80MHz to 2,7 GHz 3 Vrms 150 KHz to 80 MHz 6 V in ISM bands between 0,15 MHz and 80 MHz 80 % AM at 1 ...

No.103, Guozhong Rd., Dali Dist., Taichung City 41262 Taiwan Tel: +886-4-2406 3766 Fax: +886-4-2406 5612 Website: www.chardermedical.com E-mail: [email protected] Copyright© Charder Electronic Co., Ltd. All rights reserved. This user manual is protected by international copyright law. All content is licensed, and usage is subject to written authorization from Charder Electronic Co., Ltd. (hereinafter Charder) Charder is not liable for any damage caused by a failure to adhere to requirements stated in this manual. Charder reserves the right ...