Charder MS6001 Operation & User’s Manual

The MS6001 Bed Scale is intended for use in the electromagnetic environment specified below. The customer or the user of the device should assure that it is used in such an environment. Immunity test IEC 60601 test level Compliance level Electromagnetic environment-guidance Electrostatic discharge(ESD) IEC 61000-4-2 ± 8 kV contact ± 2 kV, ± 4 kV, ± 8 kV, ± 15 kV air ± 8 kV contact ± 2 kV, ± 4 kV, ± 8 kV, ± 15 kV air Floors should be wood, concrete or ceramic tile. If floors are covered with synthetic material, the r ...

This product has been manufactured in accordance with the harmonized European standards, following the provisions of the below stated directives: 93/42/EEC as amended by 2007/47/EC Medical Device Directive Please see separate document showing on sticker of device for above CE marking. Authorized EU Representative: Manufactured by: Charder Electronic Co., Ltd. No.103, Guozhong Rd., Dali Dist., Taichung City, 41262 Taiwan (R.O.C.) CD-IN-1464 REV XXX 08/2020 ...

A. Pre-Tare The Pre-Tare function is used to subtract the known weight of a substance prior to weighing. The MS6001 can store 10 sets of pre-tare values. Pre-tare values can be stored using two different methods: "Load Weight", or "Input Manually". After pre-tare weights have been stored, they can be recalled by holding the [PRE-TARE] key for 3 seconds. 1. Load Weight DESCRIPTION EXAMPLE Press M1-10 key after loading weight on the platform; the indicator will display blinking "m" symbol. Press numeral key 0 ~ 9 to assign this number with the current pre-tare weight. Pr ...

A. General Information Thank you for choosing this Charder Medical device. It is designed to be easy and straightforward to operate, but if you encounter any problems not addressed in this manual, please contact your local Charder service partner. Before beginning operation of the device, please read this user manual carefully, and keep it in a safe place for reference. It contains important instructions regarding installation, proper usage, and maintenance. Intended Use This device is intended to measure the weight of subjects with limited mobility, for diagnosis of weight-r ...

The MS6001 Bed Scale is intended for use in the electromagnetic environment specified below. The customer or the user of the device should assure that it is used in such an environment. Immunity test IEC 60601 test level Compliance level Electromagnetic environment-guidance Electrostatic discharge(ESD) IEC 61000-4-2 ± 8 kV contact ± 2 kV, ± 4 kV, ± 8 kV, ± 15 kV air ± 8 kV contact ± 2 kV, ± 4 kV, ± 8 kV, ± 15 kV air Floors should be wood, concrete or ceramic tile. If floors are covered with synthetic material, the r ...

1. Push bed (without subject) onto weight bridges. 2. Press [PRE-TARE] key after stable symbol appears on indicator. Display will indicate "0.00 kg". 3. Guide subject to lie down upon bed. Conduct measurement. 4. To clear tare value, remove bed from weight bridges, and press [PRE-TARE] key. Note: If total weight exceeds scale capacity (500 kg, including tare), indicator will display "Err" prompt due to overload. If subject's weight has difficulty stabilizing, the Hold function can be used. B. Hold The hold function determines average weight, des ...

accessories and spare parts. Charder is not liable for any damages arising from improper maintenance or usage. Dismantlement of the device will void the warranty. Disposal  This product is not to be treated as regular household waste, but should be taken to a designated collection points for electronics. Further information should be provided by local waste disposal authorities. Warning  Only the original adapter should be used with the device. Using an adapter other than the one provided by Charder may cause malfunction. ...

1. Without removing bed from weight bridges, press and hold the [HOLD/BMI] key for 3 seconds to enter BMI mode. Display will show last recorded height. Left-most digit will flash. 2. Enter height using numeral keys (ex: 170 cm). Input will automatically move to next digit. Press [CLEAR] key to re-input. Press [TARE] key to manually move to next digit. After inputting height, press [ENTER] to confirm. Device will display subject's BMI automatically. Category BMI (kg/m2) Risk of obesity-related disease Under < 18.5 Low Normal 18.5- ...