Chauvet Professional GROUND SUPPORT 2 KIT Quick Reference Manual
Text of the manual
QUICK REFERENCE GUIDE
Ground Support 2 Kit QRG Rev. 4
About This Guide
The Ground Support 2 Kit Quick Reference Guide (QRG) has basic product information such as setup and mounting
diagrams. Download the User Manual from www.chauvetvideo.com for more details.
Disclaimer
The information and specifications contained in this QRG are subject to change witho
Ground Support 2 Kit QRG Rev. 4
QUICK REFERENCE GUIDE
Product Overview
Product Dimensions
Panel Attachment Arm (x6)
Floor Base (x2)
Angling Horizontal Bar (x2)
Angling 1M Pipe with 2 clamps (x3)
1M Ladder Truss (x6)
TR16 Screw Jack (x10)
10.24 ft
3.12 m
3.28 ft
1 m
3.28 ft
1 m
QUICK REFERENCE GUIDE
Ground Support 2 Kit QRG Rev. 4
Setup
Before setting this product up, read the Safety Notes.
1.
Insert TR16 screw jacks into their corresponding threaded holes on the bottom of the dual-function rig bar (DRB-
F50CM or DRB-F100CM; not included with the Ground Support 2 Kit).
2.
Align the male speego connector of the floor base with
Ground Support 2 Kit QRG Rev. 4
QUICK REFERENCE GUIDE
3.
Turn the tightening nuts on the screw jacks with a 1-inch wrench (or adjustable wrench) to raise or lower the rig
bar and floor base until they are both completely level with each other. Verify that they are level with a bubble
level tool.
4.
Turn the screw jack locking nuts with a 1-inch wrench
