EnGenius EZ Hotspot V3 Setup

EZ Hotspot Extender EnGenius Europe | Veldzigt 28, 3454 PW Utrecht (NL) 0900-WIFIABC | www.wifiabc.com Disclaimer: Information may be subject to changes without prior notification. Remove the rear bottom panel. Connect one end of the Ethernet cable (not supplied) to the LAN (PoE) port on the EZ Hotspot Extender. The LAN (PoE) port can be founded on the right-hand side as seen from the back of the device. Connect the other end of the Ethernet cable to the PoE injector’s PoE port. Connect the power adapter DC inlet to the 24V DC IN of the PoE Injector and the power adapter to an electrical outlet. The device is ready for configuring when the two LEDs (Power and Wireless) are lit and the green LED stops blinking. This may take about 30 seconds. 1 2 3

EZ Hotspot Extender Follow us https://www.linkedin.com/company/engeniuseurope https://plus.google.com/+EngeniusEuropeBVDeMeern https://www.youtube.com/user/engeniuseuropebv https://twitter.com/engeniuseu Type ezhotspot.eu in your browser. Select which option applies at your location. For an extended installation version see www.engenius-europe.com. Go to your network center, view the SSIDs (network names) and select ez@XXXXXX. You can find this address at the back panel of your product. Enter your password (this is also on the back panel). 5 6 4