dams UHS800 Quick Start Manual
Text of the manual
IMPORTANT - PLEASE READ
Before starting please ensure you are aware of the type of wall that you are about to install to.
No wall fixings are supplied with this unit, it is the resposibility of the installer to ensure they are using
fittings that are suitable for the wall type.
The following steps will only s
2 MAN LIFT
ALWAYS HANDLE
ITEMS WITH CARE
IF UNSURE CALL
FOR ASSISTANCE
KEEP FITTINGS AWAY
FROM CHILDREN
2
4mm
Please check that you have all the panels
3
1
DH-WB-A
2
DH-WB-B
WALL BOOKCASE PACK A
WALL BOOKCASE PACK B
Please check that you have all the hardware
24mm QUICKFIX PIN
RM-BLT006
15mm QUICKFIX CAM
RM-CAM03
70mm CONFIRMAT SCREW
RM-CFM02
QUANTITY - 12
QUANTITY - 12
QUANTITY - 8
QUANTITY - 8
QUANTITY - 6
QUANTITY - 8
QUANTITY - 4
30 x 5mm WOOD DOWEL
RM-WOW01
BAC
Prepare all the panels by inserting the listed fittings into the corresponding holes.
4
Step 1
Insert pins and dowels into the pre drilled holes
on both top and base panels.
Qty 4
WOW01
Qty 8
BLT06
Step 2
Insert the pins and shelf pins into pre drilled holes
on LH & RH side panels.
Qty 4
PIN01
Qty 4
BLT06
Qty 4
PIN07
Top Edge
Top Edge
Insert the cams into pre
drilled holes on back panel.
See diagram B for details on
inserting the cam fittings.
3
Step 3
Insert the bung shelf supports
into the pre drilled holes on the
underside of each shelf.
Note:
Ensure the opening in the bung
aligns with the opening in the
edhe of the shelf.
See Diagram A
Prepare all the panels by ins
