Detecto AP-10 Declaration Of Conformity

15245 Shady Grove Road, Suite 130 • Rockville, MD 20850 Certificate Number: 95-087A1 Page 1 of 2 National Type Evaluation Program Certificate of Conformance for Weighing and Measuring Devices This device was evaluated under the National Type Evaluation Program (NTEP) and was found to comply with the applicable technical requirements of Handbook 44, "Specifications, Tolerances, and Other Technical Requirements for Weighing and Measuring Devices." Evaluation results and device characteristics necessary for inspection and use in commerce are on the following pages. This device was evaluated under the National Type Evaluation Program (NTEP) and was found to comply with the applicable technical requirements of Handbook 44, “Specifications, Tolerances, and Other Technical Requirements for Weighing and Measuring Devices.” Evaluation results and device characteristics necessary for inspection and use in commerce are on the following pages. Effective Date: October 4, 1996 Louis E. Straub G. Weston Diggs Chairman, NCWM, Inc. Chairman, National Type Evaluation Program Committee Issue date: November 18, 1996 Note: The National Conference on Weights and Measures does not "approve", "recommend", or "endorse" any proprietary product or material, either as a single item or as a class or group. Results shall not be used in advertising or sales promotion to indicate explicit or implicit endorsement of the product or material by the NCWM. This is a reissuance by the NCWM of a Certificate of Conformance already issued by the National Institute of Standards and Technology. Submitted by: Cardinal Scale Mfg. Co. 203 E. Daugherty Webb City, MO 64870 Tel: (417) 673-4631 Fax: (417) 673-5001 Contact: Stephen Langford For: Bench Scale Electronic Model: AP Series nmax: 4000; emin: See Below Capacity: See Below Platform: See Below Accuracy Class: III Standard Features and Options Semi-automatic, automatic, and initial zero-setting mechanisms Semi-automatic tare Battery power supply with sleep and automatic shut-off modes Gross/net display Pound/kg conversion Model Capacity and Division (d) Platform Size (in) AP-4K 4000 g x 1 g 6.75 x 5.25 AP-4KD 4000 g x 1 g 6.75 x 5.25 AP-4KDEX 4000 g x 1 g 6.75 x 5.25 AP-4KEX 4000 g x 1 g 6.75 x 5.25 AP-6 99.95 oz x 0.05 oz 6.75 x 5.25 AP-6EX 99.95 oz x 0.05 oz 6.75 x 5.25 AP-6PH 99.9 oz x 0.1 oz 6.75 x 5.25 AP-8 8.000 lb x 0.002 lb 6 x 9 AP-10 9.995 lb x 0.005 lb 6.75 x 5.25 AP-10CG 9.99 lb x 0.01 lb 6.75 x 5.25 AP-10K 9995 g x 5 g 6.75 x 5.25 AP-10KEX 9995 g x 5 g 6.75 x 5.25 Temperature Range: -10 ˚C to 40 ˚C (14 ˚F to 104 ˚F)

Page 2 of 2 Cardinal Scale Mfg. Co. Bench Scale Model: AP Series Application: General purpose weighing. Identification: The identification badge is on the side of the scale. Sealing: The device can be sealed with a physical seal. Test Conditions: This certificate supersedes Certificate of Conformance (CC) No. 95-087 and is issued without additional testing to correct the omission of the Model AP-8 and the declaration of platform sizes. The test conditions for the previous certificate are listed below for reference. Certificate of Conformance Number 95-087: The emphasis of this evaluation was on device design, performance, and compliance with influence factors. The Models AP-10K, AP-4K, and AP-8 were tested. These devices were tested over a temperature range of -10 ˚C to 40 ˚C. In addition, a permanence test was conducted on the AP-8 during which the device was tested periodically. The device was also tested over a voltage range of 100 VAC to 130 VAC. The results of these evaluations indicate that the devices comply with the applicable requirements of NIST Handbook 44. Type Evaluation Criteria Used: NIST Handbook 44, 1996 Edition Tested By: Milton G. Smith (Canada, LMB) Information Reviewed By: C. V. Cotsoradis (NIST) (95-087); L. T. Sebring (NIST) (95-087A1)