Bison SC04WKU Instruction Manual

Item Qty Description Item Qty Description A 4 Wheel H 4 1/2” X 1 Carriage Bolt B 4 Wheel Lever I 4 5/8” Lock Nut C 4 Lever Bracket O 4 1/2” Lock Nut D 4 Safety Channel P 12 1.66” Round Clamp Assembly E 4 Hand Knob Q 12 2” Round Clamp Assembly F 4 Wing Nut R 12 2” Square Clamp Assembly G 4 5/8” X 3” Carriage Bolt ♦ Inspect all contents prior to installation. Report any missing parts to dealer immediately. ♦ Read all instructions before proceeding. SC04WKU Universal Portable Soccer Goal Wheel Kit Date: 11/02/06 Rev: I.R. B.A. N.J.C. File: \drive.f\pub\sc04wkinst Ref#: 860127 Customer Service (800) 247-7668 —— Instruction Manual —— 1. Determine the size of your back stay material, these wheel kits will work on 1.66” and 2” round or 2” square. Select to appropriate Clamp Assemblies (P, Q or R). 2. Install Lever Bracket (C) and Safety Channel (D) onto the back stay with The Clamp Assembly selected from instruction #1. This wheel assembly works the best when you install as close to the vertical uprights as possible. Make sure the vertical leg of the Lever Bracket (C) is positioned to the outside of the goal and level. See illustration on page #2. 3. Attach Wheel (A) to Wheel Lever (B) in the larger of the two square holes with the 5/8” X 3” Carriage Bolt (G) and 5/8” Lock Nut (I). One side of the Wheel (A) has a hub that allows clearance for the Wheel Lever (B) and you want the Lock Nut (I) on the outside of the wheel. Keep in mind that you will need a right and left assembly, it is best to lay all of the parts out next to each upright, orient prior to assembly. Once you have both wheels assembled onto the wheel levers you can now attach the wheel lever to the Lever Bracket (C) with the 1/2” X 1” Carriage Bolt (H) and the 1/2 Lock Nut (O). Make sure the Carriage Bolt is firmly seated in the square hole on the Lever. Tighten 1/2” hardware and back off 1/2 turn until the Wheel Lever (B) can rotate freely. See illustration on page #2 4. Use the Hand Knob (E) and Wing Nut (F) to lock Wheel (A) in position for transport. Once goal is positioned for play remove Hand Knob (E) and Wing Nut (F). Rotate Wheel up and back until resting on the playing surface away from the front of the goal. Replace Hand Knob (E) and Wing Nut (F) into the Wheel Lever (B) for storage. See illustration on page #2.

Ø2.00 or 2" Sq. Optional E F G I A B H O C P Q R or or D