Basler CXP-12 Quick Install Manual
Text of the manual
An der Strusbek 60–62
22926 Ahrensburg
Germany
All material in this publication is subject to change without notice and is
copyright Basler AG.
本出版物中的所有材料如有更改，恕不另行通知，且版权归 Basler AG 所有。
本文書のすべての内容は予告なしに変更される場合があります。また Basler AG
がその著作権を有します。
TABLE OF CONTENTS
EN
ZH
JA
TABLE OF CONTENTS
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
About this Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Important Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Additional Accessories and Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
HARDWARE INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Overview of the Components (Example Installation) . . . . . . . . . . . . . . . . 6
Prerequisites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Step 1: Installing the Interface Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Step 2: Installing the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Step 3: Providing Camera Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
ACQUIRING YOUR FIRST IMAGES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Prerequisites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Acquiring Images Using the pylon Viewer . . . . . . . . . . . . . . . . . . . . . . . . . . 11
About this Document
This document provides information about how to install a Basler
boost CXP-12 camera and a Basler CXP-12 Interface Card (referred to here
as "interface card").
It also provides step-by-step instructions that help you to connect the
camera and the interface card and acquire your first images.
Important Documentation
Before installing the hardware, Basler strongly advises reading the
precautions and safety instructions of the following documents:
Basler boost Getting Started Guide (AW001552)
Basler CXP-12 Interface Card 1C Getting Started Guide (AW001558)
Note: This document describes the installation of Basler products only,
i.e., Basler boost CXP-12 cameras, Basler CXP-12 interface cards, and
additional accessories needed for operation, such as cables or cooling
elements.
You can, however, use your own frame grabbers and accessories. In this
case, observe the documentation of the corresponding manufacturers
to ensure proper installation.
For information about how to operate the Basler boost CXP-12 camera and
the Basler CXP-12 interface card, refer to the Basler Product Documentation
available at: docs.baslerweb.com
Additional Accessories and Software
Basler offers the following accessories that allow you to quickly get started
with your Basler boost CXP-12 camera:
CoaXPress 2.0 data cable, Micro-BNC x2 (HD-BNC), 3 m, 5 m, 10 m
Power-I/O cable M8 6p/open, 5 m, 10 m
Heat sink with mounting screws (M4x12)
Mount with mounting screws (M2.5x6), C-mount, F-mount, M42-mount
Power supply 18 W, M8 6p
These products can be purchased individually. Alternatively, you can
purchase the Basler CXP-12 Evaluation Kit boost, which includes a camera,
an interface card, and the accessories listed above apart from the power
supply.
For more information, visit www.baslerweb.com/boost.
The pylon Camera Software Suite (version 6.2 or higher) provides an SDK
for the camera and the interface card. Download the pylon Camera Software
Suite at: www.baslerweb.com/pylon
