bathstore NOIR 300 Quick Start Manual

20004010880 For any assistance or further information, go online at bathstore.com INSTALLATION GUIDELINES 1. Installation should be carried out by a competent engineer, in accordance with water regulations. 2. Before installation, ensure supply pipes are flushed clean. Debris or loose particles will affect the efficiency of the shower head. Failure to flush through pipe work before installation of taps may cause serious damage to the shower head for which bathstore will not be liable. 3. Shower heads in hard water areas. To prolong the lifespan and reduce servicing periods we recommend that a suitable water softener be fitted. CARE AND MAINTENANCE: To maintain the appearance of this product, ensure that it is regularly cleaned only using a clean, soft damp cloth. A solution of warm water and a mild detergent may be used where necessary, and then the fitting rinsed thoroughly and wiped dry. Any other cleaning action will invalidate your warranty. DIMENSIONS: Diameter 300mm FLOW RATE & OPERATING CONDITIONS Recommended water pressure 1 – 4 bar Optimum water pressure 3 bar 1 bar 15 L/Min 2 bar 20 L/Min 3 bar 22 L/Min 4 bar 25 L/Min Date last modified: 30/01/2018 Abrasive cleaners, scouring cleaners and acidic cleaners must not be used under any circumstances. Avoid contact with all solvents (including chlorinated solvents, ketones or acetones as these may result in surface deterioration or etching). Also avoid contact with any harsh household chemicals such as oven cleaners, drain cleaners, rust removers, paint strippers and toilet bowl cleaners, bar keepers friend, brasso or similar products. DIMENSION & LINE DRAWING 1

20004010865 DIMENSIONS: Length of the arm 150mm Date last modified: 30/01/2018 For any assistance or further information, go online at bathstore.com INSTALLATION GUIDELINES 1. Installation should be carried out by a competent engineer, in accordance with water regulations. 2. Ensure the ceiling is strong enough to support the shower head 3. Mark the ceiling before drilling 4. Be aware of the location of pipes and cables behind the wall before drilling. CARE AND MAINTENANCE: To maintain the appearance of this product, ensure that it is regularly cleaned only using a clean, soft damp cloth. A solution of warm water and a mild detergent may be used where necessary, and then the fitting rinsed thoroughly and wiped dry. Any other cleaning action will invalidate your warranty. Abrasive cleaners, scouring cleaners and acidic cleaners must not be used under any circumstances. Avoid contact with all solvents (including chlorinated solvents, ketones or acetones as these may result in surface deterioration or etching). Also avoid contact with any harsh household chemicals such as oven cleaners, drain cleaners, rust removers, paint strippers and toilet bowl cleaners, bar keepers friend, brasso or similar products. DIMENSION & DRAWING 0 0 N 1