ADTRAN 1700600L2 Quick Start

1 NETVANTA 3100 SERIES ROUTER WITH DIAL BACKUP UNIT P/N 1700600L2, 1700610L2 GETTING STARTED Two configuration methods are available for your NetVanta unit: • Web-based graphical user interface (GUI) • ADTRAN Operating System (AOS) command line interface (CLI) The GUI lets you configure the main unit settings ...

4. Select Apply. If PPP or PPPoE is selected as the Interface Mode, you will be taken to the PPP page after selecting Apply. Here you will need to select the type of authentication needed, authentication passwords, and the Address Type. In most cases, you will want the Address Type to be Negotiated. ...

3 • If the factory default switch is pressed and held for 70 seconds, a default configuration will overwrite your existing configuration and reboot the unit. When the default configuration is being applied, the STAT, WAN, DBU, and VPN LEDs will cycle. At this point, the default switch can be released. For more ...

CONFIGURE YOUR APPLICATION The applications you will need to configure vary by product and by network. Review the list of defaults for your unit before deciding what applications to configure. The following are some common applications that should be configured on startup. These are all available online o ...