Bellini BOT608B Installation & Operation Instructions

the benefit of this warranty. 1.9 If you live outside the service area of the Company or one of its service agents, this warranty does not cover the cost of transport of the Bellini product for service nor the service agent’s traveling costs to and from your home. 1.10 If you are required to transport the Bellini product to the Company or its service agent, you must ensure it is safely disconnected by a qualified tradesman and securely packed and insured. The Company does not accept ...

comes on. Defrost Select this function, the air at ambient temperature is distributed inside the oven for defrosting food more quickly and without proteins adulteration. Conventional Mode Both the lower and upper heating elements operate together. This is for traditional cooking. Very good for roasting joints, ideal for biscuits, baked apples and crisping food. You obtain very good results when cooking on a shelf adjusting the temperature between 50°C a ...

The sizes of the unit for installing the appliance under a worktop or in a column unit are shown in figure. To provide adequate ventilation, there must be appropriate ventilation opening, the panel to which the oven is fitted should have a gap of at least 70 mm at the rear. The unit panels next to the appliance must be heat resistant. In the case of veneered wood units, glues must be resistant to a temperature of 120°C. Fitting Your Appliance Fit the appliance into its surround (beneath a work-top or above another appliance) by inserting screws into the ...

Product description---------------------------- 3 Installation----------------------------------------5 Oven Setting--------------------------------------7 Maintenance and cleaning -------------------10 Warranty------------------------------------------ 13 GSM Retail Australia Pty Ltd ABN: 53 007 582 475 For Warranty and technical queries: 1300 373 199 Aust OR 0800 764 912 NZ www.belliniappliances.com.au Model: BOT608B-F FINELINE:513641 AUST & NZ 60cm Electric Oven ...

1. Please remove all stickers, leaflets and boxes from the door and from the floor of the oven before operation. 2. Please wipe out the oven interior prior to operation with warm soapy water and polish dry with a soft clean cloth. Do not close the oven door until the oven is completely dry. Select the Functions Turn the function selector in any direction to the desired function. The oven cavity light will turn on. ...

The sizes of the unit for installing the appliance under a worktop or in a column unit are shown in figure. To provide adequate ventilation, there must be appropriate ventilation opening, the panel to which the oven is fitted should have a gap of at least 70 mm at the rear. The unit panels next to the appliance must be heat resistant. In the case of veneered wood units, glues must be resistant to a temperature of 120°C. Fitting Your Appliance Fit the appliance into its surround (beneath a work-top or above another appliance) by inserting screws into the ...