Unitech MR055 Ethernet Setup
Text of the manual
Network Enabler Administrator v2.6
http://www.ute.com/files/software/38_NetworkEnabler.zip
OnlineCom Manager (or OnlineDll.dll)
http://www.ute.com/files/software/20_OnlineCommManagerSetup.exe
Connecting the Cradle to your Network:
1.
1. Connect an Ethernet cable to your MR350
2.
2. Run Network Enabler Administrator
Network Ena
10.0.0.x IP addresses. You can enter the Gateway and a DNS Server
1&2 address.
2.
d. Now select the “Serial” tab and check the “Modify” box. Now click
on the settings that appear below. A new window will pop up that will allow
user to change baud rate, parity, data bits, stop bits and flow control. The
3.
e. Now select the “Operating Mode” tab
Set the IP address and port to the settings saved by the Network Enabler
Administrator application.
Once connected, the OnlineCom Manager application will display the
contents of the MR350 on the left side of the screen and the contents of the
Note: If PC contents populate but receive “A:\?” on the left side (portable
side),
then
press
“Refresh”
unde
