Carel pGDx Touch 4.3” Quick Start Manual

Specifications

Brand:	Carel
Category:	Touch terminals
Model:	pGDx Touch 4.3” (Quick Start Manual)
File Type:	PDF
File Size:	—
Pages:	2

Download

Download Carel pGDx Touch 4.3” PDF Manual (2 pages)

Read Online

Read the Carel pGDx Touch 4.3” Quick Start Manual online using the built-in PDF viewer.

Text of the manual

+05C001895 - rel. 1.4 - 02.03.2020

��pGDx Touch 4.3” - User terminal pGDx Touch 4.3” pGDx �� (mm) / Dimensions (mm) 151,5 87,7 8,9 133,8 125,7 67,5 33,1 43,9 116,6 84,3 133,8 42 31,6 4 RIGHT WRONG 134 Ø 4 34.5 dima di foratura drilling template 127x69 mm �� (��3d) - �� PGTA00SM40 Accessory for wall surface installation (ref. Figure 3d) - P/N: PGTA00SM40 31,9 151,7 133,8 87,8 23 57,3 83,5 57,3 83,5 41,9 45,9 RIGHT side connection CHI/DE STANDARD RIGHT side connection STANDARD 503 LEFT side connection (Ethernet version) STANDARD 503 LEFT side connection CHI/DE STANDARD �� (��3c) - �� PGTA00RM40 Accessory for fl ush-mounted wall installation (ref. Figure 3c) - P/N: PGTA00RM40 63,1 54,2 150,8 86,9 133,8 148,3 82,8 to remove for plasterboard installation to remove for plasterboard installation Fig. 1 �� (mm) / Assembly and installation (mm) �� / Frontal 127 mm Ø 4 134 mm 34,5 mm 69 mm Fig.3a �� / Back 118 mm 40 134 mm 86 mm 5 5 34,5 mm 86 mm 5 5 policarbonate Fig.3b ��Wall mounting Fig.3c �� Wall surface Fig.3d Introduction The pGDx 4.3 inch graphic terminal is part of the family of touchscreen terminals designed to simplify user interface with the pCO sistema family controllers. The electronic technology used and the new 65K colour display means high quality images and advanced functions are available for a superior appearance. The touchscreen panel moreover makes interaction between the user and the unit much easier by simplifying navigation between the various screens. Diff erent types of installation are available, depending on the model: front or back panel, wall surface or fl ush-mount. In any case, the device can be mounted either horizontally or vertically. Part numbers Codice No. RS485 ports No. ETH ports Wi-Fi connectivity No. RJ12 ports Power supply port PGR04****A*** - - - 1 - PGR04****B*** 1 - - - 1 PGR04****C*** 1 1 - - 1 PGR04****R*** 1 1  - 1 PGR04****W*** 1 -  - 1 PG[B,R]04****E*** - 1 - - 1 PG[B,R]04****H*** - 1  - 1 Packaging contents pGDx; power supply and RS485 connectors (only on models where featured); fastening screws; technical leafl et, Wi-Fi antenna (only for models where fi tted, PG*04***D[H,R,W]***). Not included: frame, PGTA00TRX0 power supply and wall mounting boxes. Installation warnings For correct installation contact a qualifi ed installer. Do not install the terminals in environments with the following characteristics: • relative humidity greater than the value specifi ed in the technical specifi cations; • strong vibrations or knocks; • exposure to aggressive and polluting atmospheres (e.g.: sulphur and ammonia fumes, salt spray, smoke) so as to avoid corrosion and/or oxidation; • strong magnetic and/or radio frequency interference (therefore avoid installing the units near transmitting antennae); • exposure to direct sunlight or the elements in general; • large and rapid fl uctuations in the room temperature; • environments where explosives or mixes of fl ammable gases are present. The following requirements shall be met: • with built-in temperature/humidity sensor, it is recommended to: – only use faceplates fi tted ventilation openings – install the display away from air streams coming from heating/cooling systems – if installed vertically, position the probe at the bottom of the display • only use shielded cables for Ethernet and RS485 communication networks; • power supply voltages other than those specifi ed may seriously damage the system; • use cable ends suitable for the corresponding terminals. Loosen each screw and insert the cable ends, then tighten the screws. When the operation is completed, slightly tug the cables to check they are suffi ciently tight; • in models with an external WiFi antenna, ensure at least basic insulation (500 Vac according to IEC 60730-1) between the RP-SMA connector and the protective earth; • do not open the product when powered; • operation at low temperatures may cause a noticeable decline in the response speed of the display. This should be considered normal and does not indicate a malfunction. • for one correct installation of IP65 models be safe of a 0,4 Nm screws tightening and a correct assembly of the gasket. • avoid any contact of the product with live parts. • be sure that cables are accurately fi xed in order to avoid contact with live parts in case of their accidentally disconnection. Meaning of the colours on the notiﬁ cation bar At power-on, the notifi cation bar briefl y shows a blue signal to indicate the start of the boot phase. The subsequent signals are then managed by the application program developed using c.touch. HMI Runtime and/or application update 1. Copy the update package (.ZIP fi le) containing the runtime or application, or both, depending on the options selected when generating the “Update package” using c.touch, to a USB pendrive and then plug the pendrive into the pGDx and hold the pGDx terminal screen for a few seconds until the shortcut menu is displayed, disableable application side (see the fi gure on the side): 2. Select “Update…” to start the Runtime and/ or application update procedure. The update utility will start and the following window will be displayed: 3. Then follow the guided procedure, selecting the fi le saved on the USB pen drive and clicking the next button to confi rm. System settings Touch and hold the pGDx terminal screen for a few seconds until the shortcut menu is displayed (see the fi gure below). Select “Show system settings”; the main confi guration program screen will be displayed (fi gure on the side): Below is a list of the functions relating to the diff erent menu items: Language Set the system language (not the c.touch application) System Contains information on the pGDx: BSP version, Memory, Timers and temperature / humidity sensor (if featured) Logs Download the system log fi les Date & Time Set pGDx date and time using the automatic or manual procedure Network Show current system IP data (address, subnet, Gateway, DHCP, DNS) and access the Ethernet and WiFi interface Services Start/stop various system services (Modbus server port, pGDx network address,…) Management Update the diff erent pGDx BSP partitions (Confi gOS, MainOS, Bootloader, Splash image, etc.…) Display Set brightness, backlight timeout, screen orientation and touch panel calibration Restart Restart the system Authentication Set the password used to access EXIT Exit the menu �� (�� ) Flat cable passage (only in case of external keypad) �� Frame code: PGTA**F[T,H][0,1]* �� Frame code: PGTA**F[T,H][0,1]* �� Note: Do not run power cables inside the fl ush-mount box �� Important: keep the fl at cable isolated from the metal panel �� PG*******[B,E,W,H]*** Note: can only be used with models PG*******[B,E,W,H]*** �� Frame code: PGTA**F[B,W][0,1]* �Carel�� Not supplied by Carel �� / Wall box standard ITA/CHN/DEU/USA �� 0.4 Nm Tightening torque 0.4 Nm �� pGDx 4.3��pCO sistema ��65K�� RS485�� ETH�� Wi-Fi�� RJ12 �� PGR04****A*** - - - 1 - PGR04****B*** 1 - - - 1 PGR04****C*** 1 1 - - 1 PGR04****R*** 1 1  - 1 PGR04****W*** 1 -  - 1 PG[B,R]04****E*** - 1 - - 1 PG[B,R]04****H*** - 1  - 1 �� pGDx��RS485�� Wi-Fi��PG*04***D[H,R,W]***�� PGTA00TRX0�� – �� – �� – �� Ethernet�RS485�� WiFi�� (500 Vac��IEC 60730-1) � RP-SMA�� IP65��0�4 Nm� �� boot�� c.touch�� HMI�� c.touch��“Update package” )�� (.ZIP fi le)��USB��USB�� pGDx��pGDx�� “Update…”)�� USB�� pGDx�� “Show system settings”�� c.touch�� pGDx��BSP�� pGDx�� IP��(��DHCP�DNS)�� WiFi�� Modbus��pGDx�� …� �� pGDx BSP��(Confi gOS, MainOS, Bootloader�� …) ��

CAREL Industries HQs

Via dell’Industria, 11 - 35020 Brugine - Padova (Italy) Tel. (+39) 0499716611 – Fax (+39) 0499716600 – www.carel.com – e-mail: [email protected] +05C001895 - rel. 1.4 - 02.03.2020 CAREL�� CAREL INDUSTRIES reserves the right to modify the features of its products without prior notice. Technical speciﬁ cations Display Type LCD TFT Resolution 480x272 Wide Active display area 4.3” diagonal Colours 65 K Backlighting LCD - Lifetime 20 khrs @ 25 °C Brightness control Yes - auto-off by default after 15 min Visual angle (CR ≥10) Up/Down (40/50 deg.) - Left/Right (50/50 deg.) Contrast (typical) 350 (Φ=0°) Brightness (typical) 200 cd/m2 User interface Touchscreen Resistive System signal LEDs 8-colour notifi cation bar Interfaces Ethernet port Auto-MDIX 10/100 Mbit - RJ45 female STP CAT 5 cable Lmax = 100 m Wi Fi IEEE 802.11 b/g/n - STATION/ACCESS POINT mode Built-in/external antenna based on model Max Transmit Power = 17dBm External antenna remote mounting Lmax = 2 m External antenna connector RP-SMA female (for models PG*04***D[H,R,W]***) USB port (1) Host interface 2.0 - micro USB -B - 150 mA max (do not use to charge devices) - Lmax = 1m Serial port with RJ12 connector RS485 max 115.2 Kb/s 6-wire telephone cable Lmax = 2m Serial port with screw terminal (2) RS485 max 115,2 Kb/s Removable screw connector 3,81mm pitch Shielded twisted pair cable AWG 20-22 for ± Lmax = 500m - tightening torque 0.25Nm (2.2lbf x in) Temperature / humidity probe 0 to 50 °C / 20 to 80% rH 0 to 50 °C ±1 °C (static air) 20 to 80% ±5% (static air) (1) only for service. The USB port can be damaged by ESD (Electro-Static Discharges). It’s recommended to adopt appropriate precautions in order to avoid failures. (2) opto-isolated for model PGR04****[C,R]*** Functions Vector graphics Yes, includes SVG 1.0 support Dynamic objects Yes Visibility, position, rotation TrueType fonts Yes Multi-protocol Yes Logs and trends Yes. Limited to Flash memory capacity Multilanguage Yes, run-time language setting and limited only by available memory Recipes Yes. Limited to Flash memory capacity Alarms Yes Event list Yes Passwords Yes Real Time Clock (3) Yes, with backup battery Screen saver Yes Buzzer (3) “Beep” when pressing the touchscreen (settable) (3) only on models where featured Electrical PGR04****A*** power supply Power supply from pCO via RJ12 telephone connector (check that the power supplied by the controller is compatible with PGDx power consumption) PG*04****[B,C,E,H,R,W]***power supply 24Vdc supplied by PGTA00TRX0 accessory Lmax = 50 m(4-5-6)- cable cross section AWG 12-20 tightening torque 0.8 Nm (7 lbf x in) Max Power Absorption 7W, exception PGR04****A*** = 3W Fuse Automatic Weight Approx. 250 g Battery Non-rechargeable lithium model BR1225 Software class and structure A Purpose of control operation control Controller construction independently mounted control (PG*04***[F,T]****) incorporated control (PG*04***[R,D,W]****) Type of automatic action type 1 action Heat and fi re resistance Cat. D Overvoltage category Cat. III Insulation class Class III (4) For models PGR04***[F,T]****. To connect -Vdc to earth follow the instructions on the connection diagrams (5) For models– for fl ush mounting the PGTA00TRX0 accessory must be installed in a dedicated box (6) Power supply range: 24 Vdc ± 10% Environmental conditions Operating temperature PG*04***[T,D]****: -20T60 °C PG*04***[F,R,W]****: 0T50 °C Storage temperature PG*04*******: -30T70 °C Maximum operating and storage relative humidity 85% @ 40 °C non-condensing Ingress protection PG*04***T****: IP65, NEMA Type 1 (front) if coupled with PGTA**F [B,W][0,1]* (frame) PG*04***[D,F,R,W]****: IP20, NEMA Type 1 (front) Pollution degree 3 �� / Network connection: 4 10 6 3 9 2 1 7 5 GND RX/TX + + – + – RX/TX – GND RX/TX + RX/TX – 8 Fig.4 Mounting/�� Connectivity/�� Description �� PG*04***[F/T]**** Front Panel Mounting/ �� PG*04***D**** Rear Panel Mounting �� PG*04***W**** Wall Mounting �� PGR04****A*** PGR04****[B/W]*** PGR04****[C/R]*** PG04****[E/H]*** 1 MicroUSB rear/��  (*)  2 MicroUSB front/��    3 external keypad connector/��  4 temperature and humidity probe (6)/��(6)  (option)/ �� 5 Wi-Fi antenna SMA connector (RP-SMA)/Wi-Fi ��SMA�� (RP-SMA)  6 Ethernet port/��   7 RS485 port/RS485��   8 power supply port/��    9 RJ12 connector (power/RS485)/ RJ12��  10 notifi cation bar/��     Tab. 2 ��RS485��pLAN (Modbus��pLAN��)��RS485�� 120��RS485��HW�� 32��500m� (6)�� (*) ��PGR04***FA***�� If the RS485 port is used as pLAN (Modbus over pLAN) or display port: DO NOT connect the 120 Ohms terminal resistors into the fi rst and the last devices of the RS485 network, this is because the RS485 port is HW Slave type. The maximum number of devices which can be connected in the network is 32, and the maximum lenght of it is 500meters. (6) Periodically check that the probe ventilation holes are clean. (*) Excepted PGR04***FA*** model. ��pCO/c.pCO�� Connection to pCO/c.pCO �RJ12�� / Models with RJ12 connector PGDx C1 NO1 NO2 NO3 C1 C4 NO4 NO5 NO6 C4 C7 NO7 C7 NO8 C8 NC8 G G0 U1 U2 U3 GND +VDC U4 GND U5 GND VG VG0 Y1 Y2 Y3 Y4 ID1 ID2 ID3 ID4 ID5 ID6 ID7 ID8 IDC1 J1 J2 J3 J4 J5 J14 J10 J13 J12 J15 B MS card eldBu s card iF 4 3 2 1 Tx/Rx J11 pLAN GND J25 BMS2 Tx/RxGND Tx/RxGND J26 FBus2 +Vterm GND +5VREF J24 + XXXXXXXXXXXX Fix: cavo telefonico RJ12 Fix: RJ12 telephone cable pCO/c.pCO S90CON* Fig. 5 �RS485/Wi Fi�� / Models with RS485/Wi Fi screw terminal + – PGDx C1 NO1 NO2 NO3 C1 C4 NO4 NO5 NO6 C4 C7 NO7 C7 NO8 C8 NC8 G G0 U1 U2 U3 GND +VDC U4 GND U5 GND VG VG0 Y1 Y2 Y3 Y4 ID1 ID2 ID3 ID4 ID5 ID6 ID7 ID8 IDC1 J1 J2 J3 J4 J5 J14 J10 J13 J12 J15 B MS card eldBus card iF 4 3 2 1 Tx/Rx J11 pLAN GND J25 BMS2 Tx/RxGND Tx/RxGND J26 FBus2 +Vterm GND +5VREF J24 + XXXXXXXXXXXX pCO c.pCO Wi Fi L N + – PGTA00TRX0 230 Vac 24 Vdc Fig. 6 + – PGDx to pCO/c.pCO Ethernet Wi Fi L N + – PGTA00TRX0 230 Vac 24 Vdc to c.pCO �Ethernet��RS485/Wi Fi�� Models with Ethernet connector and RS485/Wi Fi screw terminal G G0 230 Vac C1 NO1 NO2 NO3 C1 C4 NO4 NO5 NO6 C4 C7 NO7 C7 NO8 C8 NC8 G G0 U1 U2 U3 GND +VDC U4 GND U5 GND VG VG0 Y1 Y2 Y3 Y4 ID1 ID2 ID3 ID4 ID5 ID6 ID7 ID8 IDC1 J1 J2 J3 J4 J5 J14 J10 J13 J12 J15 B MS card eldBu s card iF 4 3 2 1 Tx/Rx J11 pLAN GND J25 BMS2 Tx/RxGND Tx/RxGND J26 FBus2 +Vterm GND +5VREF J24 + XXXXXXXXXXXX c.pCO + – Ethernet Wi Fi L N + – PGTA00TRX0 230 Vac 24 Vdc �Ethernet/Wi Fi�� / Models with Ethernet/Wi Fi connector Fig. 7 Fig. 8 �� LCD TFT �� 480x272 �� 4.3” �� 65 K �� LCD - �� 20 khrs @ 25 °C �� 15�� (CR ≥10) �� (40/50�) - �/�(50/50�) ��(��) 350 (Φ=0°) ��(��) 200 cd/m2 �� LED� 8�� 10/100 Mbit - RJ45�� STP CAT 5 �� = 100 m Wi Fi IEEE 802.11 b/g/n - �/�� = 17dBm �� = 2 m ��RP-SMA�� (��PG*04***D[H,R,W]***) USB�� (1) ��2.0 - ��USB -B - 150 mA�� (��) - �� = 1m ��RJ12�� RS485��115.2 Kb/s 6�� = 2m ��(2) RS485��115.2 Kb/s ��3.81mm �� AWG 20-22 ± ��= 500m - ��0.25Nm (2.2lbf x) �� 0 ~ 50 °C / 20 ~ 80% rH 0 ~ 50 °C ±1 °C (��) 20 ~ 80% ±5% (��) (1) ��USB��ESD(��)�� (2)��PGR04****[C,R]*** �� SVG 1.0 �� TrueType�� (3) �� (3) “Beep”�� (3) �� PGR04****A***�� pCO��RJ12��(�� PGDx��) PG*04****[B,C,E,H,R,W]***�� 24Vdc��PGTA00TRX0�� = 50 m(4-5-6)- ��AWG 12-20 ��0.8 Nm (7 lbf x) �� 7W�PGR04****A*** = 3W�� 250 g �� BR1225 �� A �� (PG*04***[F,T]****) ��(PG*04***[R,D,W]****) �� 1�� D� �� III� �� III� (4) ��PGR04***[F,T]****��Vdc�� (5) ��PGTA00TRX0�� (6) ��24 Vdc ± 10% �� PG*04***[T,D]****: -20~60 °C PG*04***[F,R,W]****: 0~50 °C �� PG*04*******: -30~70 °C �� 85% @ 40 °C�� PG*04***T****: IP65, NEMA��1 (��) ��PGTA**F [B,W][0,1]*�� (��) PG*04***[D,F,R,W]****: IP20, NEMA��1 (��) �� 3 IMPORTANT WARNINGS: The CAREL product is a state-of-the-art product, whose operation is specifi ed in the technical documentation supplied with the product or can be downloaded, even prior to purchase, from the website www.carel.com. - The client (builder, developer or installer of the fi nal equipment) assumes every responsibility and risk relating to the phase of confi guration the product in order to reach the expected results in relation to the specifi c fi nal installation and/or equipment. The lack of such phase of study, which is requested/indicated in the user manual, can cause the fi nal product to malfunction of which CAREL can not be held responsible. The fi nal client must use the product only in the manner described in the documentation related to the product itself. The liability of CAREL in relation to its own product is regulated by CAREL’s general contract conditions edited on the website www.carel.com and/or by specifi c agreements with clients. �� CAREL�� www.carel.com��/�� /�� CAREL�� CAREL��CAREL�� www.carel.com��/�� UL UL60730-1 sch. CB IEC60730-1 EMC CE EN61000-6-1 / EN61000-6-2 EN61000-6-3 / EN61000-6-4 EN55014-1 / EN55014-2 Radio TECH.CODE / MODEL PGDX04001 PGDX04002 Red EN301489-1/EN301489-17 EN300328 FCC Part.15 Subpart.B SRRC CMIIT ID: 2019DJ11772 (for PGDX04001) 2019DJ11773 (for PGDX04002) ANATEL ID: 09607-19-05684 本设备无权获得有害干扰保护，也不会在经过正式授权的系统中造成干扰。 �� NO POWER & SIGNAL CABLES TOGETHER READ CAREFULLY IN THE TEXT! �� Standards Safety UL UL60730-1 sch. CB IEC60730-1 EMC CE EN61000-6-1 / EN61000-6-2 EN61000-6-3 / EN61000-6-4 EN55014-1 / EN55014-2 Radio TECH.CODE / MODEL PGDX04001 PGDX04002 Red EN301489-1/EN301489-17 EN300328 FCC Part.15 Subpart.B SRRC CMIIT ID: 2019DJ11772 (for PGDX04001) 2019DJ11773 (for PGDX04002) ANATEL ID: 09607-19-05684 This equipment is not entitled to protection against harmful interference and may not cause interference in duly authorized systems. Other certifi cation under approvals, please contact Carel Representatives for other details NO POWER & SIGNAL CABLES TOGETHER READ CAREFULLY IN THE TEXT! Always keep the signal cables and power cable in separate conduits. �� Disposal of the product: The appliance (or the product) must be disposed of separately in compliance with the local standards in force on waste disposal.

Other Touch terminals Manuals