Sunbeam DWSB3607WW Instruction Manual

It will help you to use and maintain the dishwasher properly. Pass it on to any subsequent owner of the appliance. This manual contains sections of Safety Instructions, Operating Instructions, Installation Instructions and Troubleshooting Tips, etc. The manufacturer, following a policy of constant development and updating of the product, may make modifications without giving prior notice. Keep it to refer to at a later date. If you can not resolve the problems by yourself, please call Customer Service 1-855-877-4085. Review the section on Troubleshooting Tips to solve common problems. Dishwasher Features............................................ Filtering System................................................... Caring for the Dishwasher..................................... Filling the Rinse Aid Dispenser.............................. Function of Detergent........................................... Loading the Baskets.............................................. Cutlery Basket..................................................... Wash Cycle Table................................................. Turning on the Appliance...................................... Changing the Wash Cycle..................................... At the End of the Wash Cycle................................. Positioning the Appliance..................................... Water Connection................................................ About Power Connection...................................... Connection of Drain Hoses................................... Starting the Dishwasher........................................ Before Calling for Service...................................... Error Codes......................................................... Technical Information.......................................... Control Panel.......................................................2 Utensil Guide........................................................ Forget to Add a Dish?........................................... Installation Preparation........................................ Recommendations................................................ Attention Before or After Loading the Dishwasher Baskets ............................................................... 3 4 6 6 6 8 9 9 10 10 13 17 19 18 16 16 14 14 14 12 11 10 7 2

Keep children away from detergent and rinse aid, keep child away from the open door of the dishwasher, there could still be some detergent left inside. ren Do not abuse, sit on, or stand on the door or dish rack of the dishwasher. Do not touch the heating element during or immediately after use. (This instruction is only applicable to machines with a visual heating element.) Do not wash plastic items unless they are marked dishwasher safe or the equivalent. For plastic items not so marked, check the manufacturer's recommendations. Use only detergent and rinse additives designed for an automatic dishwasher. Never use soap, laundry detergent, or hand washing detergent in your dishwasher. Keep these products out of the reach of children. During installation, the power supply must not be excessively or dangerously bent or flattened. The door should not be left in the open position since this could present a tripping hazard. Do not tamper with controls. Do not place any heavy objects or stand on the door when it is open. The appliance could tip forward. When loading items to be washed: 2 Knives and other utensils with sharp points must be loaded in the basket with their points down or placed in a horizontal position. 1) Secure sharp items so that they are not likely to damage the door seal. ) WARNING: When using your dishwasher, you should prevent plastic items from coming into contact with heating element. (This instruction is only applicable to machines with a visual heating element.) If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard. Please dispose of packing materials properly. Use the dishwasher only for its intended function. Remove the door to the washing compartment when removing an old dishwasher from service or discarding it. Dishwasher detergents are strongly alkaline, they can be extremely dangerous if swallowed. Avoid contact with skin and eyes and keep children away from the dishwasher when the door is open. Check that the detergent is empty after completion of the wash cycle. receptacle The appliance is to be connected to the water mains using new hose sets and old hose-sets should not be reused. Children should be supervised to ensure that they do not play with the appliance. This appliance is not intended for use by persons (including children with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. ) Do not operate your dishwasher unless all enclosure panels are properly in place. Open the door very carefully if the dishwasher is operating, there is a risk of water squirting out. This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance of electric current. This appliance is equipped with a cord having an equipment- grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is installed and grounded in accordance with all local codes and ordinances. Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service representative if you are in doubt whether the appliance is properly grounded. Do not modify the plug provided with the appliance; If it is not fit for the outlet. Have a proper outlet installed by a qualified electrician. READ ALL INSTRUCTIONS BEFORE USING AND SAVE FOR FUTURE REFERENCE. The maximum number of place settings to be washed is 6. The maximum permissible inlet water pressure is 1Mpa. The minimum permissible inlet water pressure is 0.04Mpa. WARNING: PROPER USE

To get the best performance from your dishwasher, read all operating instructions 3 5 7 8 9 Filter Assembly Basket Rinse Aid Dispenser Inlet Pipe Connector Detergent Dispenser 3 6 Cutlery Basket 5 8 7 Spray Arms Drain Pipe Connector 9 Cup Shelf 1 2 4 1 2 4 6 5 2 3 4 6 Power Button: To turn on/off the power supply. Wash Cycle Selector: Press the button to select wash cycles. Cycle Indicator Light. Delay Button: Press the button to delay. Start/Pause Button: Press this button to start or pause the dishwasher. Rinse aid function indicator . 7 Cycle ending indicator 3 2 4 WQP6-3607-US IMPORTANT

spots and streaks. It also improves drying by allowing water to sheet off the dishes. Your dishwasher is designed to use liquid rinse aids. The rinse aid dispenser is located inside the door next to the detergent dispenser. To fill the dispenser, open the cap and pour the rinse aid into the dispenser until the level indicator turns completely black. The volume of the rinse aid container is about 3.7 ounces. Rinse Aid Dispenser Function of Rinse Aid Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying. As the rinse aid diminishes, the size of the black dot on the rinse aid level indicator changes, as illustrated below. Full 3/4 full 1/2 full 1 full - Should refill to eliminate spotting Empty /4 Rinse Aid Indicator When to Refill the Rinse Aid Dispenser If there is no rinse aid warning light in the control panel, you can judge the amount of rinse aid by the color of the optical level indicator located next to the cap. When the rinse aid container is full, the whole indicator will be dark. As the rinse aid diminishes, the size of the dark dot decreases. You should never let the rinse aid get below1/4 full. Attention! Only use branded rinse aid for dishwasher. Never fill the rinse aid dispenser with any other substances (e.g. Dishwasher cleaning agent, liquid detergent). This would damage the appliance. To open the dispenser, turn the cap to the "open" (left) arrow and lift it out. Pour the rinse aid into the dispenser, being careful not to overfill. Replace the cap by inserting it aligned with "open" arrow and turning it to the closed (right) arrow. 1 2 3 Clean up any rinse aid spilled during filling with an absorbent cloth to avoid excessive foaming during the next wash. Don't forget to replace the cap before you close dishwasher door.

and dry. Don't put powder detergent into the dispenser until you're ready to wash dishes. Use only detergent specifically made for use in dishwashers. Keep your detergent fresh Proper Use of Detergent Adjusting Rinse Aid Dispenser The rinse aid dispenser has four settings. The recommended setting is "3". If the dishes still are not drying properly or are spotted, adjust the dial to the next highest level "4". Increase the dose if there are drops of water or lime spots on the dishes after washing. Reduce it if there are sticky whitish stains on your dishes or a bluish film on glassware or knife blades. Based on their chemical composition, detergent can be split in two basic types: The use of normal washing cycles in conjunction with concentrated detergents reduces pollution and is good for your dishes; these wash cycles are specially matched to the dirt-dissolving properties of the enzymes of the concentrated detergent. For this reason wash cycles in which concentrated detergents are used can achieve the same “ ” Detergent tablets of different brands dissolve at different speeds. For this reason some detergent tablets cannot dissolve and develop their full cleaning power during short wash cycles. Therefore please use long wash cycles when using detergent tablets, to ensure the complete removal of detergent residuals. Concentrated Detergent Detergent Tablets conventional, alkaline detergents with caustic components low alkaline concentrated detergents with natural enzymes Detergent tablets are only for the models with 3 in 1 function or 3 in 1 cycle. “ ” normal results that can otherwise only be achieved using heavy cycle. “ ”

The dispenser must be refilled before the start of each wash cycle following the instructions provided in the Wash Cycle Table. Your dishwasher uses less detergent and rinse aid then conventional dishwasher. Generally, only one tablespoon of detergent is needed for a normal wash load. Also, more heavily soiled items need more detergent. Always add the detergent just before starting the dishwasher, otherwise it could get damp and will not dissolve properly. Detergent Dispenser If the lid is closed: press release button. The lid springs open. Always add the detergent just before starting each wash cycle. Only use branded detergent aid for dishwasher. 5 Detergent tablet Detergent powder Fill the detergent dispenser with detergent. The marking indicates the dosing levels, as illustrated on right: The d can load 0.5 ounces detergent. etergent dispenser The d can load 0.9 ounces detergent. etergent dispenser Please observe the manufacturers dosing and storage recommendations as stated on the detergent packaging. Close the lid and press until it locks in place. If the dishes are heavily soiled, place an additional detergent dose in the pre-wash detergent chamber. This detergent will take effect during the pre-wash phase. A. Filling the Detergent Dispenser Refer to information about the amount of detergent for single wash cycles on page 9. Please be aware, that according to the level of soiling and specific hardness of water differences are possible. Please observe the manufacturer's recommendations on the detergent packaging. Dishwasher detergent is corrosive! Take care to keep it out of reach of children. B.

mother-of-pearl handles Plastic items that are not Older cutlery with glued parts that are not temperature resistant Bonded cutlery items or dishes Pewter or copper items Crystal glass Steel items subject to rusting Wooden platters Items made from synthetic materials heat resistant Some types of glasses can become dull after a large number of washes Silver and aluminium parts have a tendency to discolor during washing Glazed patterns may fade if machine washed frequently Are not suitable: Are of limited suitability: To prevent damage, do not take glass and cutlery out of the dishwasher immediately after the has ended. Consider buying utensils which are identified as dishwasher-safe. wash cycle Load hollow items such as cups, glasses, pans etc. with the opening downwards so that water cannot collect in the container or a deep base. Dishes and items of cutlery must not lie inside one another, or cover each other. To avoid damage to glasses, they must not touch. Load large items which are most difficult to clean into the basket. Long bladed knives stored in an upright position are a potential hazard! Long and/or sharp items of cutlery such as carving knives must be positioned horizontally in the basket. Please do not overload your dishwasher. This is important for good results and for reasonable energy usage. For best performance of the dishwasher, follow these loading guidelines. Features and appearance of baskets and cutlery baskets may vary from your model. Scrape off any large amounts of leftover food. Soften remnants of burnt food in pans. It is not necessary to rinse the dishes under running water. Place objects in the dishwasher in following way: 1. Items such as cups, glasses, pots/pans, etc. are face down. 2. Curved items, or those with recesses, should be loaded at a slant so that water can run off. 3. All utensils are stacked securely and can not tip over. 4. All utensils are placed in the way that the spray arms can rotated freely during washing. Very small items should not be washed in the dishwasher as they could easily fall out of the basket.

Plate Racks of Basket The basket is fitted with plate racks which can be stowed horizontally if required. Saucers 4 Serving Bowl 3 Glasses 1 Cups 6 Oval Platter 7 Dinner Plates Bread and Butter Plates 8 Fruit Bowl 5 Cutlery Basket 9 2 5 1 1 6

should be loaded individually into the appropriate slots, especially long utensils should be placed in the horizontal position at the front of the upper basket as shown. Do not let any item extend through bottom. Always load sharp utensils with the sharp point down. For personal safety and a top quality clean, place the silverware in the basket: Make sure cutlery does not nest together. Place silverware with handles down. Place knives and other potentially dangerous utensils handles up. Teaspoons 3 Dinner Forks 1 Serving Forks 6 Serving Spoons 5 Knives 4 Salad Forks 2

( ) *AHAM DW-1-2005: This program is the test cycle, the rinse aid dispenser setting is recommended to Position 3. Starting a wash cycle: 1. Draw out the basket (see the section titled "Loading the Dishwasher Baskets"). 2. Pour in the detergent (see the section titled "Function of Detergent" and "Filling the Rinse Aide Dispenser"). 3. Insert the plug into the socket. The power supply is 120V/60Hz. 4. Make sure that the water supply is turned on to full pressure. 5. Close the door and p 6. ress the button t . Press the program button to select wash program you need 7.Then press the Start/Pause button, the dishwasher will start. on/off o turn on the power supply Heavy->Normal->ECO->Glass->Speed->Rinse When you press the Start/Pause button to pause during washing, the display time will stop blinking and the cycle will pause and remain this cycle till you restart it again. For normally soiled loads, such as pots, plates, glasses and lightly soiled pans. Standard daily cycle. For the heaviest soiled loads, such as pots, pans, casserole dishes and dishes that have been sitting with dried food on them for a while. A shorter wash for lightly soiled loads that do not need drying. For lightly soiled loads, such as glasses, crystal and fine china. 0.5oz 110 100 45 75 0.36 0.49 0.31 0.27 Pre-wash Pre-wash Wash Rinse Rinse Drying Pre-Wash Pre-Wash Wash Rinse Rinse Drying N/A 24 0.03 Pre-wash Main-wash Wash Rinse Pre-wash Pre-wash Rinse Pre-wash Wash Pre-wash Wash Rinse Rinse Drying ECO 0.6oz 0.6oz 0.6oz Use for rinsing dishes, glasses and silverware that will not be washed right away. Speed (*AHAM DW-1-2005) Normal Heavy Rinse For lightly soiled and glass. dishes 70 0.28 Pre-Wash Wash Rinse Rinse Drying 0.5oz Glass Program Information

, because the hot water may scald you. mid-cycle When the cycle has finished, the buzzer of dishwasher will sound 8 seconds, then stop. Turn off the appliance using the On/Off button, shut off the water supply and open the door of the dishwasher. Since the appliance is on standby, it will power off after 30 minutes without any operation. Wait a few minutes before unloading the dishwasher to avoid handling the dishes and utensils while they are still hot and more susceptible to breakage. They will also dry better. wash automatically Turn Off the Dishwasher 1. Switch off the dishwasher by pressing the ON/OFF button. 2. Turn off the water tap. All panel lights should be off, indicating the cycle has ended. Open the Door Carefully Hot dishes are The dishes should therefore be allowed to cool down around 15 minutes before removing from the appliance. Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes. Dishes will be cooler and drying will be improved. susceptible to breakage. Unloading the Dishwasher It is normal that the dishwasher is wet inside. 10 A forgotten dish can be added any time before the detergent cup opens. Add forgotten dishes. Close the door. After the spray arms stop moving, you can open the door completely. 2 3 Open the door to stop the washing. carefully 1 4 5 6 Premise: You can still modify the wash cycle if the cycle has just started. If cycle has begun the detergent may have already been released and the appliance may have already drained the wash water. If this is the case, the detergent dispenser must be refilled. (See the section titled "Filling the Rinse Aide Dispenser"). To change the , press machine will be in standby mode, then you can change the program to the desired cycle setting. See the section entitled Starting a Wash Cycle. ..................................... b) The display shows no blinking lights ...........On pause. the a) All phase lights off On standby. wash cycle program selector button for more than three seconds and the The lights indicate the program/cycle phase. c) The display shows blinking lights ............... Running. Press the Start/Pause button. Press the Start/Pause Button and the dishwasher will after 10 seconds. resume If you open the door mid-cycle, the machine will pause.When you close the door, press Start/Pause to resume cyele.

The filter system consists of a coarse filter, a flat (m ain filter) and a micro filter (fine filter). Food and soil particles trapped by this filter are pulverized by a special jet on the spray arm and washed down the drain. Main filter A Larger items, such as pieces of bone or glass, that could block the drain are trapped in the coarse filter. To remove the items caught by the filter, gently squeeze the tap on the top of this filter and lift out. Coarse filter C This filter holds soil and food residue in the sump area and prevents it from being deposited on the dishes during wash cycle. Fine filter B Filter Assembly The filter efficiently For best performance and results, the filter assembly must be . remove the larger food particles trapped in the filter after each wash cycle by rinsing the filter and cup under running water. To remove the filter assembly, pull on the cup handle in the upward direction. removes food particles from the wash water, allowing it to be recycled during the cycle. cleaned and maintained regularly To clean the filter, Step 1: the filter assembly (A, B and C), then lift it all up. Counter rotate C B A Step 2: Lift B and C up from A; A B C A B C The End. Follow steps 1 through 3 to remove the filter system. Reverse steps 3 through 1 to reinstall filter. Never run the dishwasher without the filters in place. The dishwasher must never be used without the filters. Improper replacement of the filter may reduce the performance level of the appliance and damage dishes and utensils.

The exterior use a good appliance polish wax. Never use sharp objects, scouring pads or harsh cleaners on any part of the dishwasher. Protect Against Freezing 1. Cut off electrical power to the dishwasher. 2. Turn off the water supply and disconnect the water inlet pipe from the water valve. 3. Drain water from the inlet pipe and water valve. Use a pan to catch the water 4. Reconnect the water inlet pipe to the water valve. 5. Remove the filter at the bottom of the tub and use a sponge to water in sump. remove Please take frost protection measures . for dishwashers in winter conditions After each cycle please do the following: Inspect the filters for residue/build up after each use. By unscrewing the coarse filter you can remove the filter system. Remove any food remnants and clean the filters under running water. The entire filter assembly should be cleaned once a week. Cleaning The Filter Cleaning the Door To clean the coarse filter and the fine filter, use a cleaning brush. Reassemble the filter parts as shown in the figures in the last page and reinsert the entire assembly in the dishwasher, positioning in its seat and pressing downward. Clean filters gently. They are susceptible to damage. Damage to the filter may result in reduced performance of the appliance. To clean the edge around the door, you should use only a soft warm, damp cloth. To avoid penetration of water into the door lock and electrical components, do not use a spray cleaner of any kind. Never use a spray cleaner to clean the door panel as it may damage the door lock and electrical components. Abrasive agent or some paper towel should not be used because of the risk of scratching or leaving spots on the stainless steel surface. 12 If your dishwasher does not work because of ice/winter conditions, please contact a qualified service person.

dishwasher empty and then remove the plug from the socket, turn off the water supply and leave the door of the appliance slightly open. This will help the door seals to last longer and prevent odors from forming within the appliance. If the appliance must be moved, try to keep it in the vertical position. If absolutely necessary, it can be positioned on its back. One of the factors that cause odors to form in the dishwasher is food that remains trapped in the seals. Periodic cleaning with a damp sponge will prevent this from occurring. After every wash, turn off the water supply to the appliance and leave the door slightly open so that moisture and odors are not trapped inside. Before cleaning or performing maintenance, always remove the plug from the socket. To clean the exterior and rubber parts of the dishwasher, do not use solvents or abrasive cleaning products. Only use a cloth with warm soapy water. To remove spots or stains from the surface of the interior, use a cloth dampened with water with a little vinegar, or a cleaning product made specifically for dishwashers. After Every Wash Remove the Plug No Solvents or Abrasive Cleaning Moving the Appliance Seals When Not in Use for Long Durations 13 Electrical Shock Hazard. Disconnect electrical power before installing dishwasher. Failure to do so can result in death or electrical shock. The installation position of dishwasher should be near the existing inlet and drain hoses and power cord. One side of the cabinet sink should be chosen to facilitate the connection of drain hoses of the dishwasher. Cleaning the Spray Arms The spray arms can be easily removed for periodic cleaning of the nozzles, to prevent possible clogging. Wash them under running water and carefully replace them in their seats, checking that their rotary movement is in no way impeded. Grasp the middle of the spray arm, pull it upwards to remove it. Wash the arms under a jet of running water and return them carefully to their seat. After reassembly, check that the spray arms turn freely. Otherwise, check that they have been installed correctly. How to Maintain Your Dishwasher The Installation of the pipes and electrical equipment should be done by professionals. Attention!

those on the rating plate. Only insert the plug into an electrical socket which is earthed properly. If the electrical socket to which the appliance must be connected is not appropriate for the plug , replace the socket, rather than using a adaptors, as they could cause overheating and burns. being used, corresponds to Please look at the rating label to know the rating voltage and connect the dishwasher to the appropriate power supply. Use the required fuse 10 amp, time delay fuse or circuit breaker recommended and provide separate circuit serving only this appliance. This appliance must be earthed. In the event of a malfunction or breakdown, earthing will reduce the risk of electric shock by providing a path of least resistance for the electric current. This appliance is equipped with a cord having an equipment-earthing conductor and an earthing plug. The plug must be plugged into an appropriate outlet that is installed and earthed in accordance with all local standards and requirements. 14 for personal safety: DO NOT USE AN EXTENSION CORD OR AN ADAPTER PLUG WITH THIS APPLIANCE. DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE FROM THE POWER CORD. EARTHING CONNECTION Improper connection of the equipment earthing conductor can result in the risk of an electric shock. Check with a qualified electrician or service representative if you are in doubt whether the appliance is properly earthed. Do not modify the plug provided with the appliance. If the plug does not fit properly to the outlet, please have a qualified electrician to install a proper outlet. and the sides, along the adjacent cabinets or wall. The dishwasher is equipped with water supply Position the appliance in the desired location. The back should rest against the wall behind it, and drain hoses that can be positioned to the right or the left to facilitate proper installation. Electrical Connection Do not use an extension cord or an adapter plug with this appliance. Do not, under any circumstances, cut or remove the earthing connection from the power cord. Electrical Requirements Ensure proper ground exists before use

faucet adapter must be installed on the faucet before you can connect the dishwasher. This adapter is included inside your dishwasher. The faucet adapter is compatible with faucets inclusive of either male (outside) or female (inside) threaded faucet connections. To avoid excess water in the inlet hose, close the faucet after use. 15 Back View Water Connection

necessary). Connect the six-sided connection of the drain hose to the drain port connection on the back of the dishwasher cabinet. Do not over-tighten (to avoid damage to threads). Connect the star-shaped connection of the inlet hose to the inlet port on the back of the dishwasher cabinet. Do not over-tighten (to avoid damage to threads). Connect the circular connection of the drain hose onto the longer (bottom) male connection on the quick connect. Connect the circular connection of the inlet hose onto the shorter (top) male connection on the quick connect. Attach the quick connect onto the faucet adapter, by pulling down the outer locking collar on the quick connect, while pushing the quick connect upward onto the faucet adapter. When the quick connect snaps onto the faucet adapter, it releases the locking collar. Verify the connection is secure. Slowly open the hot water line and check for any sign of water leaks at all hose connections. If leaks are located, immediately close the water supply and repair the hose connections. 1 2. 3. 4. 5. 6. 7. 8. ． 1. Once you open the water supply line, (even if it is closed immediately thereafter), the inlet hose will be pressurized. 2. To relieve water pressure from inside the inlet hose, (make sure the water line (faucet) is closed): press and hold the pressure relief button on the quick connect until the flow of water stops. Shut off the water supply at the faucet. Disconnect the power supply cord red 1. 2. Disconnecting the Dishwasher Failure to relieve water pressure before disconnecting the quick-connect from the faucet,will result in back-pressure over-spray. The temperature of incoming water can be very hot, and back-pressure over-spray could cause severe burns and /or scalding. DO NOT LET CHILDREN DISCONNECT THE DISHWASHER; CLOSE SUPERVISION OF CHILDREN IS ALWAYS IMPORTANT AROUND APPLIANCES. The following things should be checked before starting the dishwasher. 1 The dishwasher is level and fixed properly 2 The inlet valve is open 3 There is no leakage at the connections of the conducts 4 The wires are tightly connected 5 The power is switched on 6 The inlet and drain hoses are knotted 7 All packing materials and printings should be taken out from the dishwasher Connection of Drain Hoses IMPORTANT WARNING! DANGER! Attention! After installation, please make sure to keep this manual. The content of this manual is very helpful to the users. Hard water conditions will adversely affect the washing performance of your dishwasher. Hard water conditions will also contribute to 'lime' (white film substance) deposits and/or 'scaling' on the stainless steel surface of the dishwasher tub and heater element, located in the sump underneath the removable filter screen. To assist in minimizing these conditions, it is recommended to periodically operate/rinse the inside of the dishwasher (empty) using 1 cup of white vinegar at least once a week.

circuit breaker tripped. Replace fuse or reset circuit breaker. Remove any other appliances sharing the same circuit with the dishwasher Spilled rinse aid. Always wipe up rinse aid spills immediately. Hard water minerals The affected items are not corrosion resistant. The sp ay arm is knocking against an item in a basket. r Dishes/utensils are not secured in the washer. This may be caused by on-site installation or the cross-section of the piping. To clean the interior, use a damp sponge with dishwasher detergent and wear rubber gloves. Never use any other cleaner than dishwasher detergent for the risk of foaming or suds. Interrupt the program, and rearrange the items which are obstructing the sp ay arm. r Interrupt the program, and rearrange the items properly. This has no influence on dishwasher function. if in doubt, contact a suitably qualified plumber. Detergent with colors/dyes were used. Make sure that the detergent is the one without colors/dyes. Improper detergent. Make sure the dishwasher is turned on and the door is closed securely. Closed dishwasher making sure that door latches. Make sure the power cord is properly plugged into the wall socket. Power supply is not turned on. Door of dishwasher not properly closed. Kink in drain hose. Filter clogged. Kitchen sink clogged. Check drain hose. Check coarse filter. (see section titled ) the " Cleaning The Filter " Check kitchen sink to make sure it is draining well. If problem is kitchen sink not draining, you may need a plumber rather than a serviceman for dishwasher. Use only the dishwasher detergent to avoid suds. If this occurs, open the dishwasher and let suds evaporate. Add 1 gallon of cold water to the tub. Close and latch the dishwasher, then start the "soak" wash cycle to drain out the water . Repeat if necessary. appropriate 17 Technical problems General problems Noise Dishwasher doesn't start Keep corrosive substances away. Water not pumped from dishwasher Suds in the tub Stained interior White film on inside surface There are rust stains on cutlery Knocking noise in the wash cabinet Rattling noise in the wash cabinet Knocking noise in the water pipes

The dishes were not loaded correctly. See notes in " Loading the Dishwasher Baskets ". Select a more intensive wash cycle. See" Wash Cycle Table ." Use more detergent, or change your detergent. Rearrange the items so that the sp ay can rotate freely. r Clean and/or fit the filter combination correctly. Clean the sp ay arm jets. See "Cleaning the Spray Arms". r Use less detergent if you have soft water and select a shortest cycle to wash the glassware and to get them clean. Use a mild abrasive cleaner to eliminate those marks. Re-loading the dishes properly. Load the dishwasher as suggested in the directions. Increase the amount of rinse aid/refill the rinse aid dispenser. Do not empty your dishwasher immediately after washing. Open the door slightly so that the steam can escape. Begin unloading the dishwasher only once t he dishes are barely warm to the touch. Empty the low basket first. This prevents water form dropping off dishes in the upper basket. In short wash cycles the washing temperature is lower. This also lowers cleaning performance. Choose a with a long washing time. wash cycle Water drainage is more difficult with these items. Cutlery or dishes of this type are not suitable for washing in the dishwasher. The wash cycle was not powerful enough. Not enough detergent was dispensed. Item are blocking the path of sp ay arms. r The filter combination in the base of wash cabinet is not clean or is not correctly fitted. This may cause the sp ay arm jets to get blocked. r Combination of soft water and too much detergent. Aluminum utensils have rubbed against dishes. Dishes block detergent cups. Improper loading. Too little rinse aid. Dishes are removed too soon. Wrong wash cycle selection. Using cutlery with a low-quality coating. If overflow occurs, turn off the main water supply before calling a service. If there is water in the base pan because of an overfill or small leak, the water should be removed before restarting the dishwasher. 18 Unsatisfactory washing result Unsatisfactory washing result When malfunctions occur, the appliance will display error codes to warn you: Longer inlet time. Faucets is not opened, or water intake is restricted, or water pressure is too low. Some element of dishwasher leaks. Overflow. Cloudiness on glassware Black or gray marks on dishes Detergent left in dispenser cups The dishes are not drying

Capacity 19 Power Supply 19.7" 21.7" 17.2" 2017 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. Sunbeam logo is a trademark of Sunbeam Products, Inc. used under license. All rights reserved. Manufactured by Foshan Shunde Midea Washing Appliances Manufacturing Co. Ltd. Distributed by Guangdong Midea Kitchen Appliances Manufacturing Co., Ltd. 1-year limited warranty. For service or support, call toll-free 1-855-877-4085. TM 120V AC should be 120 F ° 6 Place settings 120V AC 0.04-1.0MPa