Strong MDI Monarch Installation Manual

[email protected] www.strongmdi.com MONARCH INSTALLATION MANUAL IMPORTANT Unpack carefully and verify that all parts are included in the package. Manipulate frame and screen with care to avoid any damage. 4- Frame sections (2 - sides with inserts* and 2 - top and bottom) 8- 1/4-20 X1/2" machine screws 2- Wall brackets 1- PVC screen (in a tube) Legs (optional): 2- Part A. 2- Part B. 8- 1/4-20 X 1/2" machine screws If the box contains two Monarch structures: each structure is identifi ed with a color dot, one red and the other green. REAR VIEW / FIGURE 1 READ ALL INSTRUCTIONS BEFORE PROCEEDING PARTS CHECKLIST: *Note that the corner inserts and the wall bracket mounts are pre-assembled. ASSEMBLY 1- Place the four frame sections as indicated in fi g.1. on a fl at clean surface, taking care not to damage the frame fi nish. 2- Assemble the four sides by inserting the corners on the top and bottom parts. 3- Assemble each part with the 1/4-20 screws supplied. Apply gentle pressure on the corners while tightening the screws for a nicer joint fi nish. 4- Verify the fi nished frame and adjust if necessary. 5- Place the screen on the frame ; align the red dot on the screen with the one on the frame. Handle screen by the edges only, avoid touching screen surface. 6- Attach the screen to the frame with the snaps and adjust if required. Snaps are pre- adjusted but may require minor adjustments. Red dots Corner insert

[email protected] www.strongmdi.com WALL-MOUNT INSTRUCTIONS Install wall brackets ; refer to fi g. 2 for the distance required between the wall brackets. Install the frame onto the brackets Screw the wall brackets onto the bottom of the frame with the supplied screws. (refer to fi g. 3) OPTIONAL LEG SUPPORT SYSTEM 1- Assemble parts A and B for each leg with 1/4-20 screws. 2- Insert the screen frame (refer to fi g. 4). Be sure that the 2 leg brackets are properly inserted. 3- Fix angles to the legs with 1/4-20 screws. WALL BRACKETS / FIGURE 2 WALL MOUNT INSTALLATION / FIGURE 3 LEG SUPPORT INSTALLATION / FIGURE 4 X = Frame width – 1 ¼" X A B Leg connection Angle connection