Steelcase Series 1 Instructions

your local dealer, or Steelcase Line 1 at 888.STEELCASE (888.783.3522) for immediate action by people who want to help you. (Outside the U.S.A., Canada, Mexico, Puerto Rico, and the U.S. Virgin Islands, call: 1.616.247.2500) Or visit our website: www.steelcase.com © 2017 Steelcase Inc. Grand Rapids, MI 49501 U.S.A. Printed in U.S.A. ® Page 1 of 2 110117 Rev A Steelcase Series 1 Back Flexor/Upholstery CS Instructions T-10 T-15

110117 Rev A ® Replacing Flexor/ Upholstery Assembly 1. Remove flexor screws (4x). NOTE: Extend chair to maximum height with height adjustment lever, and slide seat to most forward position. 4. Push the new Flexor assembly side clips onto the frame from top to bottom (4a). Push the bottom of the Flexor assembly back into place (make sure black strip attached to the upholstery is locked onto Flexor assembly flanges) (4b). 2. Pull out the bottom Flexor assembly. 3. Push the side of the plastic flexor toward the frame with flathead screw driver, then pull out to disengage the Flexor assembly from the frame. Repeat for other side. 5. Replace screws removed in step 1 (4x). Tighten, but do not strip. Check lumbar function 1 2 3 3 View from Underneath Backside 4a 4a 4b 5 T-20 T-15 T-20 T-15 NOTE: Use flathead screw driver