StarTech.com Spiral Cable-Management Sleeve - Black Quick Start Manual

Manual Revision: August 30, 2019 Product Diagram (CMSCOILED) Part Function 1 Cable-Management Sleeve • Organize Cables into one bundle 2 Cable Insertion Tool • Guides Cables into the Cable-Management Sleeve Requirements For the latest requirements please visit: www.startech.com/CMSCOILED. Installation Basic 1. Open the Cable Channel by rotating the Tube within the Cable Insertion Tool. 2. Feed the Cables into the Cable Insertion Tool though the V-Shaped Opening in the Tube. (Figure 1) Spiral Cable-Management Sleeve - Black 3. Rotate the Tube in the Cable Insertion Tool to close the Cable Channel. (Figure 2) 4. Insert the Nose of the Cable Insertion Tool into one end of the Cable- Management Sleeve. 1 2 Figure 2 Nose Figure 1 Cable Channel V-Shaped Opening Tube

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third- party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders. Warranty Information This product is backed by a two-year warranty. For further information on product warranty terms and conditions, please refer to www.startech.com/warranty. FR: fr.startech.com DE: de.startech.com ES: es.startech.com NL: nl.startech.com IT: it.startech.com JP: jp.startech.com StarTech.com Ltd. 45 Artisans Cres London, Ontario N5V 5E9 Canada StarTech.com Ltd. Unit B, Pinnacle 15 Gowerton Rd, Brackmills Northampton NN4 7BW United Kingdom StarTech.com LLP 2500 Creekside Parkwy Lockbourne, Ohio 43137 U.S.A. Limitation of Liability In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you. 5. Pull the Cable Insertion Tool through the entire length of the Cable-Management Sleeve. (Figure 3) Note: It may be necessary to hold the Connectors of the Cables to prevent them from being pulled into the Cable Insertion Tool. 6. Rotate the Tube in the Cable Insertion Tool to open the Cable Channel. 7. Remove the Cables from the Cable Insertion Tube. Advanced If the application requires specific Cables to exit the Cable-Management Sleeve at different points, follow these instructions. 1. Follow steps 1-3 from the Basic Installation, loading only one Cable into the Cable Insertion Tube. 2. Determine the location where the Cable must exit the Cable-Management Sleeve. Gently pry apart the selected section of the Cable-Management Sleeve and follow steps 4-7 from the Basic Installation. 3. Repeat the Advanced Installation steps for any additional custom Cable configurations. (Figure 4) Removal Pull the Cables out of the Cable-Management Sleeve. Press the pliable Cable- Management Sleeve back into shape if it has stretched out. Figure 3 Figure 4