Spectech T142 Operation & User’s Manual

Failure to do so may result in serious personal injury and / or property damage. Safety Precautions • Do not expose this product to heat sources (including open flame or direct sunlight) • Do not expose this product to water or liquids. If liquid enters the product, immediately unplug the product from any connected power sources or devices. • Do not dissemble or modify the product • Avoid dropping this product (or any other heavy impact which might damage the internal circuit) • In the unlikely event of any abnormalities (such as strange odor, overheating, leaking, color change, etc.), discontinue use immediately. • Avoid cleaning this product using liquids or chemical substances (use dry cloth only) • Only use attachments/accessories specified by the manufacturer • Dispose of this item properly (do not dispose of it in trash receptacles and do not attempt to incinerate it) • This product is not a toy: KEEP AWAY FROM CHILDREN • This product cannot work on a glass or mirror surface. Avoid operating this mouse on a glossy surface. • Avoid operating this product on a metal surface as it may disrupt transmission between product & USB nano receiver T142 USER MANUAL The T142 is a 2.4G wireless optical mouse with USB nano receiver. Please see below product specifications & user guide. T142 Specifications 1. Battery Type: 1x Grade A non-recycled non-rechargeable alkaline AA battery 2. Wireless Frequency: 2.4GHz 3. DPI (Dots Per Inch): 2 adjustable DPI levels (800 or 1600) 4. FCC ID: 2ARPF-T142 5. Product Size: 2 ½” x 4 ½” x 1 ¼” 6. Net Weight: 65g (weight does not include 1x AA battery) 7. Accessories included in the box: • 1x T142 (USB nano receiver included) • 1x Grade A non-recycled non-rechargeable alkaline AA battery • 1x User Manual

T142 Operation ** NOTE: Remove battery stopper prior first use (pull on the battery stopper tab) 1. ON: Switch the ON/OFF button to ON (a red LED will flash once to indicate the T142 is powered ON) 2. OFF: Switch the ON/OFF button to OFF Establishing a wireless connection between the T142 & laptop/desktop computer ** NOTE: System requirements must be met to ensure T142 installation a) Operating system (supports Windows 7/8/10/XP, Vista/ME/NT, DOS, Macintosh OS) b) USB port on a laptop or desktop computer 1. Remove battery cover of the T142 2. Detach the USB nano receiver (positioned near AA battery slot) & replace battery cover 3. Insert USB nano receiver to an available USB port on your laptop or desktop computer (NOTE: no device pairing required) 4. Switch the T142 ON/OFF button to ON (a red LED will flash once to indicate the T142 is powered ON) Troubleshooting If a connection is not established between the T142 & USB nano receiver, please follow one of these No. Description 1 Left button 2 Right button 3 Scroll wheel 4 DPI (Dots Per Inch) button 5 LED light sensor 6 Battery cover 7 ON/OFF switch 8 AA battery slot 9 USB nano receiver Top View Bottom View Bottom View (without battery cover)

i. Switch the T142 ON/OFF button to OFF ii. Unplug & re-plug the USB nano receiver into your computer/laptop b) Test the USB nano receiver onto another available USB port on your computer or laptop c) Replace the AA battery in the T142. Adjusting DPI (Dots Per Inch) level between 800 or 1600 1. To switch from 800 to 1600 dpi: press DPI button once 2. To switch from 1600 to 800 dpi: press DPI button once NOTE: DPI is a measurement of how sensitive a computer mouse is. The higher a computer mouse’s DPI, the farther the cursor on your screen will move when the mouse is in use. T142 Battery Replacement 1. Remove battery cover 2. Insert 1x AA battery 3. Replace the battery cover NOTES: • the red LED will flash intermittently to indicate that battery replacement is recommended • it is recommended to switch the T142 power button OFF when not in use to conserve battery power CAUTION: Risk of Fire and Burns, don’t open, crush, disassemble and dispose of in fire. Accessible surfaces held or touched for short periods only. Don’t heat above 50 °C or Incinerate. Follow Manufacturer’s Instructions FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

d'utiliser ce produit. De ne pas prendre ces précautions pourrait entraîner des blessures graves et/ou des dommages matériels. Précautions de sécurité • Ne pas exposer le produit à des sources de chaleur (incluant les flammes nues ou la lumière directe de soleil). • Ne pas exposer le produit ni à de l’eau ni à des liquides. Si du liquide s’introduit dans le produit débrancher celui-ci immédiatement de toute source d’énergie ou d’un dispositif quelconque. • Ne pas démonter ni modifier le produit. • Éviter les impacts qui pourraient endommager les circuits internes du produit • Dans le cas improbable d’anomalies (telles que odeurs étranges, surchauffe, filtrations, changements de couleur, etc.) arrêter d’utiliser le produit immédiatement. • Éviter de nettoyer le produit avec des liquides ou des substances chimiques (n’utiliser qu’un tissu sec). • N’utiliser que les pièces et les accessoires spécifiés par le fabricant. • Se débarrasser du produit correctement (ne pas le jeter aux poubelles ni essayer de l’incinérer). • Ce produit n’est pas un jouet: LE GARDER HORS DE LA PORTÉE DES ENFANTS. • Ce produit ne peut pas fonctionner sur du verre ou sur la surface d’un miroir. Éviter de manipuler la souris sur une surface trop lisse. • Éviter de manipuler la souris sur une surface métallique car cela pourrait perturber la transmission entre le produit et le nano-récepteur USB. Manuel de l’utilisateur de la T142 La T142 est une souris optique sans fil 2.4G incluant un nano-récepteur USB. Ci-dessous le mode d’emploi du produit et ses spécifications. Spécifications de la T142 1. Type de batterie : 1x non recyclable, non-rechargeable, alcaline AA Grade A 2. Fréquence sans fil : 2.4GHz 3. PPP (Points par pouce) : 2 PPP ajustable, niveaux (800 ou 1600) 4. FCC ID: 2ARPF-T142 5. Dimensions du produit : 2 ½po x 4 ½po x 1 ¼po 6. Poids net : 65 grammes (le poids n’inclut pas la batterie AA) 7. Accessoires inclus dans la boîte : • 1 T142 (nano-récepteur USB inclus) • 1 non recyclable, non-rechargeable, alcaline batterie AA Grade A • 1 Manuel de l’utilisateur