Socket S740 Operation & User’s Manual

Barcode Scanner Model S740/S760 www.socketmobile.com SOCKETSCAN® S740/S760 USERGUIDE socketmobile.com ...

Package Contents 4 Product Information 5 Attach Wrist Strap 6 Charge the Battery 7 Optional Charging Accessories 8 Powering on/off 9 Scanning Barcodes 10 Bluetooth Connection Modes 11-12 How to setup your scanner: Download our Companion App for Apple® and Android Device 13 Setup Alternatives How to setup your scanner in Basic Mode: Basic M ...

Auto Mode (Charging Dock or Stand) 20 Bluetooth Unpairing 21 Factory Reset 22 Restore Method 23 Bluetooth Reconnection of Scanner 24 Status Indicators 25-28 Product Specifications 29-30 Helpful Resources 31 Safety, Compliance & Warranty 32-42 Battery Warning Statements 38-39 Command Barcodes 43-48 ...

DuraScan®, Battery Friendly® are registered trademarks or trademarks of Socket Mobile, Inc. Micro- soft® is a registered trademark of Microsoft Corporation in the United States and other countries. Apple®, iPad®, iPad Mini®, iPhone®, iPod Touch®, and Mac ...

Scan button Power button* Battery Light (Green/Yellow/Red) Bluetooth Light (Blue) Charging pins Power Connector Stand Attachment/ Battery Door twist lock 5 Made with antimicrobial additives for protection against harmful microbes. Socket Mobile’s barcodes scanners can be wip ...

1. Detach the string loop of the tether from the lanyard. 2. Feed the string loop through the eyelet. 3. Pull tight so the string loop is secure. 4. Reattach the string loop to the tether from the lanyard. ATTACH WRIST STRAP 6 ...

The scanner must be fully charged before first use. Please allow 8 hours uninterrupted charging for the initial battery charge. The scanner will stop charging once the battery is full (No overcharg- ing occurs). • Amber Light = Charging • Green Light = Fully charged Important: Charging from a com ...

8 For all optional accessories visit our Socket Store.com. AC Power Supply International Adapters available Charging Dock Charging Stand ...

power button until the Battery light turns on and the scanner beeps twice (low-high). Powering Off/ Disconnecting: Press and hold down the small power button until the scanner beeps twice (high-low) and lights turn off. The scanner will power off auto- matically if device is not con- nected within 5 minutes. Scan- n ...

S760 only Passport Aim at the center. Scanning Barcodes 1. Hold the scanner at least 4 inches from the barcode. 2. Aim, press and hold the scan button. By default, the scanner will beep, vibrate, and the scan indicator will flash green to confirm a successful scan. The S760 is setup ...