Smart I BIOSLIM Operation & User’s Manual

Thane-421302, Maharashtra. INDIA. Contact:- (+91) 7039047042 , (+91) 02522-661518 Web: www ystems.com E-mail: enquir ystems.com SMART-I ELECTRONICS SYSTEMS PVT. LTD. An ISO 9001:2008 certified company PRESENCE: MUMBAI-DELHI-BANGALORE–KOLKATA-CHENNAI-AHMEDABAD–PUNE-HYDERABAD

warranty. Do not power on the system without reading this manual. Ensure proper power supply with Earthing. Note down the serial number and model no. of the device for future reference and quote in all support and service requests. To connect or interface the Card reader to the 'BIOSLIM' unit please refer to the Hardware Installa�on Guide or Manual and carefully follow the instruc�ons. A trained technician must make the connec�ons. Any negligence on your part may damage the Card reader interface on the BIOSLIM terminal. Moun�ng the unit in strong sunlight may affect user visibility of the LCD. Ensure that the LCD and LED's are clearly visible in all ligh�ng condi�ons. The fingerprint sensor glass may periodically require cleaning - use suitable glass cleaner. Never insert objects of any kind into the unit or through the cabinet slots as they may touch voltage points and/or short circuit parts possibly resul�ng in fire or electric shock. Never spill liquid of any kind on the unit. When connec�ng up the BIOSLIM ensure that the mains power supply is safely isolated. Power up the controller only when installa�on is complete. As this product is regularly updated, we cannot guarantee exact consistency between this product and the informa�on provided in these instruc�ons. We will hear no disputes that arise due to differences between the actual product and the contents of these instruc�ons, and you may not be informed of changes in advance. Congratula�ons on purchasing your new BIOSLIM and thank you for the confidence you have shown in us. You have chosen a high-quality product that has been manufactured, tested and packed with care. Please familiarize yourself with these instruc�ons, before a�emp�ng to install the BIOSLIM. Because prolonged reliable and trouble-free opera�on will only be ensured if it is fi�ed properly. We hope your new BIOSLIM will bring you las�ng safety and effec�ve opera�ons for your employee a�endance. BIOSLIM series are Cost effec�ve BIOSLIM System with rugged design & Touchscreen keypad. It boasts of compact aesthe�cs and strong design with flawless fingerprint op�cal sensor. Preface 1

2 The Contained in This Manual are Subject To Change without No�ce at Any Time. It is Smart I's goal to supply accurate and reliable documenta�on. If you discover a discrepancy in this document or Need Help, please e-mail your comments to support@smar�systems.com Warning & Cau�on________________________________________________________4 Get started with Bioslim____________________________________________________5 Specifica�on_____________________________________________________________6 Descrip�on of keys & other parts____________________________________________ 7 Keypad Menu Details______________________________________________________7 How to Use______________________________________________________________8 Moun�ng Plate Details____________________________________________________21 Bioslim Connec�on details_________________________________________________23 Bioslim Connnector wire details _____________________________________________24 Bioslim Reader connec�on details___________________________________________25 Standalone Bioslim Configura�on___________________________________________ 26 Connec�ng To Host Computer______________________________________________27 Enrollment Process_______________________________________________________30 Trouble Shoo�ng_________________________________________________________32

under warranty. Do not power on the system without reading this manual. Ensure proper power supply with Earthing. Note down the serial number and model no. of the device for future reference and quote in all support and service requests. To connect or interface the Card reader to the 'BIOtrak' unit please refer to the Hardware Installa�on Guide or Manual and carefully follow the instruc�ons. A trained technician must make the connec�ons. Any negligence on your part may damage the Card reader interface on the BIOtrak terminal. Moun�ng the unit in strong sunlight may affect user visibility of the LCD. Ensure that the LCD and LED's are clearly visible in all ligh�ng condi�ons. The fingerprint sensor glass may periodically require cleaning - use suitable glass cleaner. Never insert objects of any kind into the unit or through the cabinet slots as they may touch voltage points and/or short circuit parts possibly resul�ng in fire or electric shock. Never spill liquid of any kind on the unit. When connec�ng up the BIOtrak Access Controller ensure that the mains power supply is safely isolated. Power up the controller only when installa�on is complete. 3 Warning & Cau�on When connec�ng card or Biometric readers to any emergency entry, exit door, barrier or elevator must provide an alterna�ve exit in accordance with all fire and life safety codes per�nent to the installa�on. These fire and safety codes vary from city to city and you must get approval from local fire officials whenever using an electronic product to control a door or other barrier. Fire Safety and accountability No�ce

Template Upload/Download Op�on in So�ware (Refer User Manual of So�ware for taking finger prints backup and uploading the backup finger prints back to the Bioslim devices.) Care should be taken iden�fying the wires. Improper wiring may render permanent damage to the device or personal injury. Refer the color code on the Reader to connect the external weigand reader on the controller. Check the earthing at the site before installing the controllers. Normally the earthing should be between 1V to 2V only. Earthing on the higher side may damage the controller or its various other components.

5 Included items: Product Image Qty Use Bioslim Power Supply So�ware CD Installa�on Guide & Test Report 1 1 1 1 A�endance System Supplying power for the Biometric Unit For Device Configura�on/ Management & For Data Downloading For referring func�ons keys for programming the device by keypad & Other Installa�on Details h�p://www.smar�systems. com/So�ware.html In case you do not have the required power supply included in the package and intends to buy your own power supply use these specifica�ons. Below given specifica�ons should be strictly adhered to. Power Supply Specifica�on: Device Applica�on Power Supply Input Output Bioslim Access (Lock Voltage) Universal AC Adapter Isolated i/o 110 to 230 VAC 12 V DC/ 2A (Min)

No. of Users Opera�on Modes Sensor Communica�ons Port Baud Rate Controller ID Display Keypad LED Language Power Supply Enclosure Color Dimension (H X W X D) in mm Moun�ng Par�culars Descrip�on 32 Bit RISC Arm Upto Flash 8 MB 1,00,000 1900/19000 7500 UID/Card + Finger UID/Card only Card + Finger Card Only UID/CARD+F+ PIN UID /card +pin Card only + pin UID only + pin Finger only Card & finger High Quality Scratch Resistance Op�cal Sensor. TCP/IP, weigand, Rs485 9600bps (Default) Max 9999 TFT colour display Capaci�ve Touch sense Keypad Tricolor LED Bar English 12 V DC/ 2A (Min) IP65 ABS Plas�c Silver & Black (209 x 57 x 47.02)in mm Wall Moun�ng Sensor Specifica�on: Par�culars Descrip�on Type Image Resolu�on Enrollment Time Verifica�on Time Iden�fica�on Time Template Size EER/FAR/FRR Image Size (Pixels) Sensing Area (mm) Op�cal 500 dpi <1 sec <1 sec 1 sec 384 bytes <0.1%/0.001%/0.1% 272 X 320 16X19 6

administra�on for small, medium or, large business enterprises for standalone door access control deployment. BIOSLIM brings the high speed, accuracy, flexibility and user friendly interac�vity. It provides intui�ve and aesthe�c GUI on graphical LCD with easy- to-use touch sense keypad. Descrip�on of keys & other parts Opera�onal keys: keys To access keypad func�ons& to enter UID for verifica�on Scroll keys to select menu a�er admin login. Back key to go back on previous screen To go to the home screen Entering into menu parameter and set the values for parameter Descrip�on 7 ① TFT touch Screen display ② Biometric Sensor ③ Tricolour LED Bar ④ RFID card reader ⑤ Menu Key ① ② ③ ④ ⑤ 1 2 3 4 5 6 7 8 9 0 Menu key Enter key Clear key Back key Enter key Back key Menu key Scroll UP Scroll Down Numeric Keys (0-9)

8 Step 1.: Enrollment Process Press on menu key Enter admin id >> 11111(Default admin id) > press Enter . Enter password >>12345(Default password) > press Enter . 1. Do Admin login ii iii 2. ADD User I. Press on USER icon ii. Add User by Showing card on reader or Enter UID > Enter > iii. Add Finger 1 (across UID)> Press Yes>(Place Finger Twice) iv. Add Finger 2 > Press YES or NO > Enter > v. Logout A�er Admin Login Success Step 2.: Verifica�on Process i. Show Card / Enter UID and Place finger ii. For Authorized Swipe, authorized message will be displayed along with logo and long Beep and Led will turn Green iii. For Unauthorized Swipe, User authorized message will be displayed along with logo and two buzzer beep and Led will turn Red. Power OFF >ON and check point (i) again. 15 : 39 : 15 Tue 19 Feb 2019

1. Press on Network icon 2. Select Network Se�ng > Enter 3. In this menu user can edit the various parameters such as, unit IP address, subnet mask, default gateway, server IP address …..etc. User have to set various parameters such as, *IP Address *Subnet mask *Gateway *Server IP Address *Local port No *Push Server1 IP *Push Server1 Port *Push Server2 IP *Push Server2 Port 4. Enter>> Reset the Device.

mode selected (a)If System>>Sensor>>Iden�fy mode>> Enable> Thumb print symbol will be Displayed (b)By default only Home key is displayed in normal condi�on (c)If System>>Allow UID by Key >> Enable> Fig C will be displayed (d)Provides informa�on of LAN connec�vity 15 : 39 : 15 LOGIN SCREEN Home Screen Admin Login 1 2 3 4 5 6 7 8 9 0 Admin ID 00000 On pressing home key, Login screen will be displayed. Enter Admin ID .: 11111 and Press Enter. Then enter Password .: 12345 Login Screen Admin Login 1 2 3 4 5 6 7 8 9 0 Enter Password 00000 (a) (b) (d)

2: Set Date 3: Add Admin ID 4: Delete Admin ID 5: Change Password ADMIN 1. Set Time Select op�on press enter key 1)Will allow to set Time as require i. hh:mm:ss ii. hh:mm 2)Try to set invalid TIME> It will not allow to set 2. Set Date Select op�on press enter key 1)Will allow to set Time as require 2)Try to set invalid DATE> It will not allow to set 3. Add Admin ID 1) Select op�on press Enter key 2) Add Admin ID & Password 3) Try to Add more than its capacity. 1)Admin ID should get added properly 2)Should Memory Full message if buffer is full. 5. Change Password System should ask for old and new password 4. Delete Admin ID 1) Select op�on press Enter key 2) Enter Admin ID & Password 3) Try to Delete un added admin ID. 1)Admin ID should get deleted and should get logged in. 2)It Should show user search fail.

2: Del User 3: Search User 4: Change Pin 5: Add user Data USER 1. Add User 1)Enter User ID & presenter. It will ask for finger 2)If finger is already added>Display finger exist. 3)Make card memory full & then add the card. 1) User to get added properly with proper Pin number and finger. 2) ON memory full it should show "memory full" message 2. Del User 1)Enter user ID to delete press enter. 2)Try to delete unadded UID. 1) User should get deleted proper along with finger 2) "User Not Found" message should be displayed for dele�ng Unadded UID. 3. Search User 1)Search added card 2)Search unadded card 1) Will show card number and Pin of that card 2) It will show "User Search Fail" for unadded card 4. Change Pin 1)Enter UID press# 2)Enter OLD PIN press# 1) Pin should get change properly 2) A�er searching that same card, User 6: Add FingTo ID 7: Facility Code 8: DUA Search Card 3)Enter NEW PIN Press enter properly Pin should be shown 5. Add User Data 1)Enter UID press# 2)Select op�on from UID/Card + Finger UID/Card only Card + Finger Card Only UID/CARD+F+ PIN UID /card +pin Card only + pin UID only + pin Finger only Card & finger Should work as per func�on men�on 1.UID/Card + Finger 2.UID/Card only 3.Card+Finger 4.Card Only 5.UID/CARD+F+ PIN.: If finger is place it ask for pin and access 6.UID /card +pin 7. Card only +pin 8.UID only +pin 9.Finger only 10.Card & finger : both are compulsory 6. AddFing To ID 1)Enter UID press enter 2)Place finger on sensor proper Finger should get added and score should be shown 7. Facility Code 1)Facility En/DI 2)Show card or enter UID 3)Update facility code Proper Facility code should be shown according to card digit. 8.DUA Search Card 1)Show Card/ Enter UID 2)Enter 0/1 EN/DI Duress 3)If Dual authen�ca�on is ON I. Enter card number ii. Select Admin Type iii. Enter Group NO. iv. Duress Check If Duress is ON across any UID then Duress event is generated and access is granted Refer Annexure C

2: Set Controller No 3: Sensor 4: Controller Type 5: Weigand Out Reader SYSTEM 1. Set Slave ID 1) Enter Slave No from 1 to 128. Proper Slave ID should be set with "slave ID Updated" message 1) Controller Number from 0 to9999 Proper controller number should beset with "controller number Updated" message 1) On selec�ng this op�on will see 12 different levels. 2) Select any one out of 12 levels. Level should get set proper as per requirement Refer Annexure A 3.3.Set Finger DB verify 1) On selec�ng this op�on will see 3 different op�on 1=Normal 2=Iden�fy by Key 3=Auto Iden�fy 1) Select any one out of 11 op�on 1=Bio Access 2=Bio Access 2RD 3=Bio A�n 4=Bio A� 2rd 5=Bio A�n No chk 6=Bio A� No chk2rd 7=Bio A� SCNO chk 8=Bio A�n NO Chk3RD 9=Deny List 10=Bio no Chk 11=Deny list bio no chk 1=Show card sensor will get enable 2=Press ((O)) key Sensor will get enable 3=Sensor will be ON con�nuously controller should set properly and should func�on accordingly. 1=Bio access= Relay trigger()single reader 2=Bio Access 2RD= 3=Bio A�n= relay won't trigger 4=Bio A� 2rd 5=Bio A�n No chk=don't Checkholidays 6=Deny List=Access transac�on 2: Set Controller No 3.Sensor 3.1 Sensor Security Level 3.2. Iden�ty Mode 4. Controller Type

op�on out of 7op�on 1=Weigand 26 2=Weigand 32 3=Weigand 34 4=Weigand 26 or card 5=Weigand 32 orcard6=Weigand 26 or transparent 7=Weigand 32 or transparent This applicable only in weigand out. The bit will send to controller according bit set. 6.Displayi. Disp Brightness To vary the brightness level from zero to 10 To set display brightness Min value - 0Max value - 10 ii. Disp. Sleep EN/DI 1.Enable 2.Disable Given to enable/disable auto display sleep (i.e. brightness level set to 0) a�er se�able �me in sec. iii. Set Disp Sleep Time A�er Se�ng the Time the display brightness will change to Zero Display will get to brightness level 0 And a�er single touch on display or Card swipe or finger swipe the brightness of display will get to its set value iv. Card Digit Display 1) Select any one out of 3 op�on 5Digit / 8Digit / 10Digit Card Number will be displayed accordingly for 5, 8 or 10 digit. v. Display User Name Type 1) Select any one out of 3 op�on a. UID only b. Name only c. UID and Name On showing card, Card details will be displayed as per selec�on. 7.Allow UID by Key 1.Enable 2.Disable If Enable then Menu will be displayed on Home screen. 8.Sound EN/DIS 1.Sound VID/IVID 2.Keypress 3.USER Error 4.All Sound 1.Only sound of authorised and unauthorized user will be played. 2.Only sound of keypad will be played 3.Only for any error sound will be played 4.All Sound EN 5.All Sound DIS 9.Dual auth EN/DI Enable / Disable op�on for Dual authen�ca�on To Use the system in dual auth mode enable dual auth and configure using dua search card op�on.

2: MAC Secu. EN/DS 3: TCPPush EN/DS 4: TCPPush Porto.No. 1. Network Se�ng 1) Select accordingly to make changes i. Ip address ii. Subnet mask iii. Gateway iv. Local server port no. v. Push Server IP vi.Push Server Port All network should get set properly check a�er off/on unit. Refer Annexure B 2.Mac Secu. EN/DS Enable MAC Security Only Device with set MAC address can download the transac�on. 3.TCP Push EN/DIS Enable MAC Security Enable TCP push to download transac�on on register ip address 4.TCP Push Protocal number As per selec�on transac�on will be pushed and Del. Network NETWORK 1: Door Open Time 2: Shared DOTL 3: Reader In/Out 4: Fire TAMPER EnDS 5: Set APB En/DiS 1. Door Open Time 1)Set Door Open �me. By default will set to 5sec We can enter the desire door open �me and it shows saved message 1)En/Dis Share DOTL Reader no:1 ReaderNO:2 Reader no: All By Default Shared DOTL is not in used 1)Reader Normal 1=Reader In 2=Reader Out 3=Reader IN/ OUTToggle 4=Scheduled INOUT 5=As weigand out 1.Reader Works as Normal 2.For reader in or reader out we require 2 different controller. 3.Reader IN/OUT N.A. 4.Schedule reader 5.As weigand DOOR DOOR DOOR 2. Shared DOTL 3. Reader In/Out 1)Disable All 2)Enable Fire 3) Enable Tamper 4)En Fire Tamper 5)En Intrusion 6)En Fire Intrusion 7)En Intrusion, Tamper 5) En Intrusion =NA 6) En Fire Intrusion =NA 7) En Intrusion, Tamper =NA 4. Fire TAMPER EnDS 1) Set APB En/Dis An� pass back will be enable. 15 5. Set APB En/DiS

2: Wiegand Display 3: Network Test 1. Ini�alize System 00 Delete all data 01 Delete Transac�on 02Delete All Users 03Set All Default 04Delete Sys. Info 05Delete Time Zone 06Delete Holiday 07Delete Facility Code 08Delete Door info 09Delete Admin Ids 10Reset System 11Delete Cards Only 12Delete all fingers 13Delete all expt N/W 14Ini�alize Update Should have show all message properly on display. Trouble shoot TROUBLESHOOT 2. Weigand Display Select op�on Press enter key It shows Reader No, Weigand Bits of par�cular card 3. Network Test 1) Gateway/LAN Test 2) Internet Test Check the device is connected to network or not

2: Wiegand Display 3: Network Test Display All Parameter Shows All parameter related to system. Device info DEVICE INFO Disp Useful Parameter Model Number Unit ID Controller No Card Buffer Used Card Buffer Bal. Card Buffer Trans Buffer Used Trans Buff Bal. Trans Buff Templates supp. Used Templates Bal. Template Serial No Manufacturing Date FW Compile Date Firmware Version Hardware Version Controller Type Reader Type MAC address It shows Reader No, Weigand Bits of par�cular card LOGOUT Enter to Log Out Logout LOGOUT a�er pressing enter system should log out Press enter

Annexure A Security level specifies FAR (False Acceptance Ra�o). If it is set to “Level 2” i.e. 1/100,000, it means that the probability of accep�ng false fingerprints is 1/100,000. The following table shows the rela�onships between the automa�c security levels and the number of enrolled templates. For example, when the security level is Automa�c Secure and the number of enrolled templates is 500, the actual FAR for iden�fica�on will be 1/10,000,000. The security level for verifica�on is not changed. Automa�c Level Verifica�on (1:1) Iden�fica�on (1:N) 1/10,000 1/1,00,000 1/10,00,000 1/10,000 1/1,00,000 1/10,00,000 Normal Secure More Secure 1 ~ 9 1/1,00,000 1/10,00,000 1/1,00,00,000 1/10,00,000 1/1,00,00,000 1/10,00,00,000 1/10,00,000 1/1,00,00,000 1/10,00,00,000 10 ~ 99 100 ~ 999 1000 ~ (NOTE: The values of FAR in Security level are suggested by Suprema)

Local UDP Port Server IP PUSH Server1 IP PUSH Server1 Port PUSH Server2 IP PUSH Server2 Port UDP PushServer IP UDP PushServer Port HB Server IP Set IP address to device for TCP/IP communica�on As per your network. As per your network. For device iden�fica�on and communica�on For device iden�fica�on and communica�on Set Server IP Address, it is used when MAC security feature is Enable. Set Server IP Address where we want to push transac�on data using TCP. Set Server IP Address where we want to push transac�on data using TCP. NA NA Set Server IP Address where we want to push transac�on data using UDP. Set Server IP Address where we want to push transac�on data using UDP. Set Server IP Address where we want to push Heart Beat data. Device sendsall important informa�on to this server. 14. 15. HB Server Port HB Time Set Server Port Address where we want to push Heart Beat data. Set Heart Beat Time, this is �me delay a�er which controller send Device Informa�on to HB Server IP. 19

Annexure C 1) Firstly You have to Login à Press Home key à Enter Admin ID “ 11111” à Press Enter à Password “12345” à Press Enter. 2) Enroll the finger for Users from User menu. Go in User menuàEnter in Add user à Show card or Enter UID à press enter à Press YES �àPress enter à�Sensor get ON à Place Finger à it will Display Finger Added with …%. 3) Repeat Step no.2 for Number of Users to added in Unit. 4) Now to config dual user go in User menu & select „DUA Search Card‟. Show card or enter UID à Press Enter.(Make sure Dual authen�ca�on is ON) 5) Now enter 01 for Master & 00 for normal user. Press Enter. Assign Group no. Press Enter. 6) Press “01” à to enable Duress & Press “00” à to Disable Duress Press enter (it will go for next card number) 20

21 30.0 mm 40.0 mm Pan head self threaded star (M3*10) screw in wall 081. mm Pan head self threaded star (M3*10) screw in wall 18.0 mm 11.0 mm 11.0 mm 80.0 mm Pan head self threaded star (M3*10) screw in wall 30.0 mm 528. mm

LAN COMMUNICATION Network Switch TCP/IP 12V DC Power Supply ( SLAVE) BIOMETRIC READER CAT5e / CAT6 FOR LAN COMMUNICATION R Weigand Out EXIT CARD READER STRIKE LATCH ML EXIT SWITCH DOOR MAGNETIC CONTACT EMERGENCY SWITCH FIRE PANEL DOTL BUZZER GND GND +VE

A B C D E Power Rs485 Ethernet Exit Reader Door & Lock PIN PIN DESCRIPTION WIRE 1 POWER + (12Vdc) RED 2 POWER - BLACK PIN PIN DESCRIPTION WIRE 1 D+ GREEN 2 D- WHITE PIN PIN DESCRIPTION WIRE 1 TX+ BLUE 2 TX- ORANGE 3 RX+ GREY 4 V+ BROWN 5 R- YELLOW 6 V- BROWN PIN PIN DESCRIPTION WIRE 1 12V RED 2 GND BLACK 3 DO GREEN 4 D1 WHITE 5 BUZZER YELLOW 6 LED BROWN 7 TAMP VOILET PIN PIN DESCRIPTION WIRE 1 12V RED 2 GND BLACK 3 NO ORANGE 4 NC GREY 5 C BLUE 6 EG WHITE 7 MC GREEN 8 FIRE ORANGE 9 DOTL VOILET

CAT5e / CAT6 FOR LAN COMMUNICATION Network Switch TCP/IP 12V DC Power Supply ETHERNET (A) (B) ( ) C (D) RS 485 POWER WGND OUT 12V GND D+ D- TX+ TX- RX+ RX- V+ V- 12V GND D0 D1 BZ LED TAMP D0 12V GND D0 D1 BZ LED TAMP D0 Control DeviceAccess WGND IN

FIRE INTEGRETION PANEL SMARTi So�ware BIOSLIM Out HUB EML Lock TCP/IP TCP/IP 26

The Bioslim can be connect to the computer by TCP/IP (Ethernet). Note: Use proper manually crimpedCAT5cable, Refer bellow images, Manually Crimped RJ-45 ReadymadeRJ-45 X The Bioslim series can be connected on the LOCAL AREA NETWORK (LAN) Or Wide Area Network (WAN) as under: Connec�ng single controller directly to a PC Using TCP/IP (CAT5) Network Cable Step 1 Use the crossover network cable, with one end connected to the Biotrak TCP/IP port, and the other end to your PC network adapter. Step 2 To check your PC's IP Address Se�ngs, find out the IP address of the network. To do so, go to a PC in the network presently, press Start -> Run -> Type “command” and click on 'OK'. Step 3 Type “ipconfig” and press 'Enter'. Step 4 Note the IP Address displayed, following is an example. 27

Password (12345) press ↵ then select network call which will display the Current IP Address to Controller, make a note of it. (Default IP of the controller is 192.168.000.200) Step 6 To change the IP Address in Controller unit. Refer Configura�on of Biotrak (port is default 01234 no need to change) Tes�ng the Connec�on Once the configura�on is complete, it is recommended that the connec�on be tested. To test the connec�on following is the under men�oned steps Step 1 At the PC, Click Start -> Run -> Type “command” and press 'OK'. Step 2 Type “Ping 192.168.0.251 -t” (The IP Address should reflect that of your Biotrak unit) Note: - If unsuccessful, either “Des�na�on Host Unreachable” or “Request Timed Out” will be displayed, please follow the above steps carefully and test the connec�on. 28

To test the connec�on following is the under men�oned steps Step 1 At the PC, Click Start -> Run -> Type “command” and press 'OK'. Step 2 Type “telnet ipaddress port" (The IP Address should reflect that of your Bioslim unit) Note: - If unsuccessful, either “Connect failed will be displayed, please follow the above steps carefully and test the connec�on. Successful Connec�vity Unsuccessful connec�vity 30

administrator's computer, and the biometric data is distributed to other readers over the 'Bioslim' Network. I Proper Finger Presenta�on. When it is necessary to place your finger on the fingerprint sensor, gently place the last segment of the finger used during enrollment squarely & firmly on the fingerprint sensor. II Keep finger on fingerprint sensor un�l the unit responds in one of the following ways. If the LED lights up in green, the authen�ca�on is successful LED STATUS BUZZER STATUS DESCRIPTION LED FLASHES RED LED FLASHSES GREEN SHORT BEEP LONG BEEP USER NOT FOUND ACCESS GRANTED 31

Make sure the network cable is func�onal; some�mes a damaged cable may be the cause of all problems. To check if it is func�onal, make sure there are no loose ends and the jack is properly a�ached to the cable. Check that the IP Address Assignment matches the network se�ngs of the corporate LAN or the PC being used. Make sure no IP has clashed and that there are no two iden�cal IP addresses in the network. # No Communica�on from Biometric Controller to PC To Enter into Admin Mode refer the manual Check for Iden�fica�on mode by Using Key func�ons. Select an op�on and press enter to go in Iden�fy menu. In this menu user Can set different types of iden�fy mode like normal mode, iden�fy by key, auto sense etc. by using keys 2-8 select the mode and set press enter to set it. # Fingerprint sensor not ac�vate in Iden�fy mode Check whether the power supply is working or not The output voltage generated by the power supply is 12V DC. Check this voltage using mul� meter if possible Check 12V-Gpower connector properly inserted into a socket. # LCD screen of the Biometric completely blank NO, do not connect 2 locks or 2 readers together on a single connector. A single lock connector can safely drive 600mA current. If load current increases beyond 1A, that may cause hardware problems. # Is it possible to connect two locks or two readers on single connector? 32

fingerprint in �me. You have to check if the strength of pushing when your finger pressed on the sensor is strong or not. You have to keep being proper strength when your finger pressed on the sensor. You have to check if your finger departs from the sensor before capturing the image. Your fingerprint doesn't have to depart from the sensor before capturing image. # "Time out" is displayed a�er the sensor went on the state of "Light-up". Checkfor lock magne�c contact (MC+/ MC-), it should be short if not in used.(Refer connec�on Diagram) # Con�nues Beep & Door Force Open To Enter into Admin Mode & search user finger refer keypad func�ons. If user is added then it will show card no and fingers enrolled. The state of your fingerprint is dry. So, the sensor cannot scan the image of your fingerprint in �me. You have to place your finger squarely and firmly on the sensor for proper scanning of the fingerprint image. # When finger is placed on sensor in display show “User Unauthorized” If the System/Unit is ini�alizing then password will not match. In this case RESET the System i.e. power off and then power on the system then enter Admin Id and password. # Admin User: User/Password Fail No Not possible to connect Bioslim as weigand reader on Site # Is it possible to connect Bioslim as weigand reader then what will be to step follow-up? 33

Hereby gives a warranty for a period of 12 months from the date of purchase to the first purchaser. The warranty assures that the Company will repair or replace, without charges, any part or parts of the product (all hereina�er collec�vely referred to as the "product") sold and iden�fied by the Company to be defec�ve in material or workmanship under normal use. The Foregoing Warranty is Company's sole and exclusive warranty. The Company makes no other warran�es of any kind, either express or implied. This warranty is subject to the following limita�ons: Limita�ons of Warranty 1 This warranty is confined of the first purchaser of the Product only. 2 This warranty does not cover damage(s) caused to the Product by reason of misuse, altera�on, normal were and tear, physical damage, accident, any acts of god, erra�c power supply or failure to follow instruc�ons issued by the company of proper usage of the product(s). 3 The Company is not liable for any incidental or consequen�al losses, costs, damages expenses or liability incurred by the customer caused due to fire, intrusion, the�, smoke etc. as a result of any defects in the Product sold or any of its parts requiring field repair, installa�on, or any other reason. The liability of the Company shall be restricted only to repair or replacement as men�oned above. This warranty assures free repair or replacement only of the defec�ve Product and does not warrant the intended use of the Product. 4 The Company / its authorized representa�ves reserves the right to either repair or replace the Product at their discre�on. If the required repairs can be carried out at the customer's place then the Company's authorized engineer will visit the customer's place and carry out repairs there. However, it the Product requires to be repaired at the Company's premises, then the Company's engineer is authorized to bring back the product or any of its part(s) for repair / replacement at the company's authorized service center. 5 If at any stage it is found that the Product has been unauthorized tampered, in that case this warranty shall lapse immediately and there upon the Company shall stand absolved from all its obliga�ons under this warranty. WARRANTY CERTIFICATE Valid in India 34

provides may not be compromised or circumvented, and that the product will prevent any personal illness or loss of health by infec�on, or otherwise, or that the product in any case provides accurate warning or protec�on. Customer understand and fully aware that a properly installed and maintained electronic screening system may only reduce the risk of infec�on, illness, or other events which may occur without such systems and screening, but is not an insurance or a guarantee or an assurance of preven�on, or any assurance that such a situa�on will not occur or that there will be no personal illness or loss to health as a result of any such situa�on. 7 If the customer has defaulted in payments of any of its dues to the Company, then this warranty shall stand suspended �ll the �me the customer clears all his defaults, and such period shall be counted in calcula�ng the total period of warranty. In such circumstances the Company reserves the right to carry out repair / replacement under this warranty at its own discre�on. 8 In the event of repairs / replacement of any of the Product or part(s) thereof, this warranty will therea�er con�nue and remain in force only for the unexpired period of the warranty. Moreover the �me taken for repair / replacement and in-transit whether under the warranty or otherwise shall not be excluded from the warranty. 9 The Company is not liable for any delay in servicing due o reasons beyond the control of the Company or any of its Authorized Service Centers. 10 If the Product is given on rent or allowed to be used by any person other than the first customer without the prior wri�en approval of the Company, then this warranty shall not remain in force and shall lapse with immediate effect. 11 If the Product is removed from the place where it was installed by the Company without prior approval of the Company, then the Company shall not be liable to honor this warranty. 12 In case a�er installa�on of the Product, the loca�on of the place where the Product is installed is to be changed, then at least one week before the date of change, in�ma�on is to be given to the Company or its Authorized Service Centre so that the warranty obliga�on for the remaining part of the warranty can be transferred to the new loca�on of the first purchaser. in such a case, 35

charged(s) will be levied by the Company depending upon the type and extent of the service(s) required. 13 Damage(s) to the Product or any of its part(s) caused during shi�ing or transporta�on is not covered under this warranty, unless such shi�ing or transporta�on is done by the Company itself. 14 Although the Company will make every effort to carry out repair / replacement under this warranty as soon as possible, the Company shall not be liable to do so within any specified �me. 15 This warranty shall terminate on expiry of the warranty period for which it is given irrespec�ve of whether the Product was in use or not. 16 The Company / its Authorized Service Centres reserves the right to retain any part(s) of Component replaced at its discre�on in the event of a defect no�ced in the Product during the warranty period. 17 The Company's employees or authorized representa�ves have no authority to vary any of he terms of this warranty. 18 This Warranty is issued in lieu of all other condi�ons expressed or implied by law or by any person purposing to act on behalf of the Company and excluded every condi�on not herein expressly set out19 This Warranty is issued at Mumbai and Courts at Mumbai shall have exclusive jurisdic�on on ma�ers covered by or arising out of this warranty. If a customer wants repair / replacement to be carried out to the Product or any of its part(s) etc., under this warranty, he should contact any of the contact details as given below. 20 The Company has currently launched the Product in 67 ci�es of India as per the list given overleaf. The Company will give warranty support to the customer in the geographical vicinity of these ci�es only. 136

Product Name: ___________________ Item Code: ___________________ Serial No: ___________________________ Franchisee Details Name: __________________________ Date: ____ / ____ / ____________ Addres:_____________________________________________________ ____________________________________________________________ ____________________________________________________________ Stamp 37

1. Agra 2. Ahmedabad 3. Ajmer 4. Akola 5. Allahabad 6. Anand 7. Aurangabad 8. Bangalore 9. Baroda 10 Belgaum1 1. Bhavnagar 12.Bhilai 13.Bhopa 14.Bhubaneshwar /Cu�ack 15.Calicut 16.Chandigarh 17.Chennai 18.Coimbatore 19.Delhi /NCRF 20.Durgapur 21.Goa/Punjim & Madgaon only 22.Guwaha� 23.Hubli/Dharwad 24.Hydrebad 25.Indore 26.Jabalpur 27.Jaipur 28.Jalandhar 29.Jammu 30.Jodhpur 31.Kanpur 32.Kochi 33.Kolhapur 34.Kolkata 35.Ko�ayam 36.Lucknow 37.Ludhiana 38.Madurai 39.Mangalore/Udupi 40.Mehsana 41.Mumbai 42.Mysore 43.Nagpur 44.Nasik 45.Navasari 46.Panipat 47.Pa�ala 48.Patna 49.Pondicherry 50.Pune 51.Raipur 52.Rajkot 53.Ranchi 54.Rourkela 55.Salem 56.Sangli 57.Silliguri 58Sonipat 59.Surat 60.Tatanagar 61.Thrissur 62.Trichy 63.Trivandrum 64.Udaipur 65.Ujjain 66.Vapi 67.Vizag The Service Contract op�on will be extended to these 67 ci�es only The proposed contract is a Na�onal Service Contract which can be transferred to any of the 67 ci�es to which we would cater As we go forward we plan to extend it to other loca�ons as well. Contact: +91-02522-661521 | Email: service@smar�systems.com 38

Invoice No:________________________ Product Name:______________ Model No ________________________ Serial No:_________________ : Contact Person:_____________________ Phone No:________________ Email ID __________________________ Warranty Expiry:____________ : Customer Industry Type: (please �ck relevant) Retail / Media Entertainment / Mall & Mul�plexes/ Healthcare / IT&ITES Educa�on / BFSI / Manufacturing / Pharmaceu�cal / Tourism & Hotel Environment: (please �ck relevant) Direct Sunlight / Air-Condi�oned / Dusty / Humid All Func�ons working properly: Yes/No Whether device/s are connected to UPS: Yes/No The system has been installed sa�sfactorily. I have read warranty condi�ons men�oned above. Customer Sign:______________ Engineer Sign:______________ Customer Stamp:____________ Dealer/Distributor Stamp/Sign _ SMART-I Electronics Systems Pvt. LTd. Fill in your details and post this por�on of the warranty cer�ficate to "Manager - Service, Smart-i Electronics Systems Pvt. Ltd, Bhumi World, Pimplas, Bhiwandi, Thane, Maharashtra-421302.INDIA" or hand over to "SMART-I Representa�ve", The warranty will not be valid if the following por�on is not sent within 15 days of purchase. 39

Bhumi World, Pimplas, Bhiwandi, Thane, Maharashtra-421302.INDIA Call: +91-02522-661521/500 or email us at service@smar�systems.com