PROLiNK PRN3006L Operation & User’s Manual

an information retrieval system, translated into any language, or transmitted in any form or by any means, mechanical, magnetic, electronic, optical, photocopying, manual, or otherwise, without the prior written permission. Trademark All products, company, brand names are trademarks or registered trademarks of their respective companies. They are used for identification purpose only. Specifications are subject to be changed without prior notice. CE Declaration of Conformity This equipment complies with the requirements relating to electromagnetic compatibility, EN 55022/A1 Class B. i

1 Introduction.............................................................................................................................................1 1.1 Packaging Contents.........................................................................................................................1 1.2 Product Overview............................................................................................................................2 1.3 Hardware Overview........................................................................................................................3 1.4 LED Indicator..................................................................................................................................4 2 Router Installation...................................................................................................................................5 2.1 System Requirement........................................................................................................................5 2.2 Router Positioning...........................................................................................................................5 2.3 Hardware Setup...............................................................................................................................6 3 Getting Started........................................................................................................................................7 3.1 TCP/IP Setup...................................................................................................................................7 3.2 Enter Into Web Configuration.........................................................................................................9 3.3 Enter Into PROLiNK mWiFi.........................................................................................................11 3.4 Setup Wizard.................................................................................................................................13 4 Web Configuration................................................................................................................................16 4.1 Home.............................................................................................................................................17 4.2 WAN..............................................................................................................................................18 Connection......................................................................................................................................18 Connection Setting..........................................................................................................................19 APN Setting....................................................................................................................................19 4G/3G/2G Modem..........................................................................................................................20 PIN..................................................................................................................................................20 PLMN.............................................................................................................................................21 4.3 LAN...............................................................................................................................................22 LAN................................................................................................................................................22 DHCP..............................................................................................................................................22 4.4 SMS...............................................................................................................................................24 New Message..................................................................................................................................24 USSD..............................................................................................................................................25 InBox..............................................................................................................................................25 OutBox............................................................................................................................................26 DraftBox.........................................................................................................................................26 Settings SMS..................................................................................................................................27 4.5 WiFi...............................................................................................................................................28 Basic...............................................................................................................................................28 WPS................................................................................................................................................29 MAC Filter.....................................................................................................................................30 Station List......................................................................................................................................30 4.6 Security..........................................................................................................................................31 Firewall...........................................................................................................................................31 NAT................................................................................................................................................32 DMZ...............................................................................................................................................33 4.7 System...........................................................................................................................................34 iii

Language.........................................................................................................................................37 UPnP...............................................................................................................................................37 Reboot.............................................................................................................................................37 5 Frequently Ask Question (FAQ)...........................................................................................................38 6 Technical Specification.........................................................................................................................40 iv

1 Introduction 1.1 Packaging Contents Quantity (unit) Item Descriptions 1 1 PRN3006L 2 2 LTE Antenna 3 1 RJ45 Ethernet Cable 4 1 Power Adapter 5 1 Quick Installation Guide (QIG) 1

1.2 Product Overview PROLiNK® PRN3006L 4G LTE Wireless Router is design to provides with greater speed of data transferring up to 150Mbps support your daily life device requirement such as Laptop, Personal Computer, Smartphone, iPad and other Internet connection devices. Wireless technology implemented on PROLiNK® PRN3006L is 2T2R MIMO Wireless Technology which have a greater throughput and performance, ideal for video streaming without and interruption, downloading movies and files quickly and uploading photos and files without disconnection. PROLiNK® PRN3006L Wi-Fi sharing is capable to support up to 32 user or devices. PROLiNK® PRN3006L allow user to monitor and configure through built in Web Configuration and PROLiNK mWiFi mobile application. With intuitive and simply design interface on both Web Configuration and PROLiNK mWiFi, all user are able to quickly setup and configure PROLiNK® PRN3006L. 2

1.3 Hardware Overview 1 LED Indicator LED indicator for Power, 2.4GHz, LAN, Internet and Mobile Signal 2 Antenna LTE Antenna to extend mobile coverage 3 Power Button To switch ON and OFF PRN3006L 4 DC Input To connect with provided power adapter 5 LAN Port Port to connect with client Ethernet port and one of LAN to 6 Telephone Port To connect telephone line 7 Reset Button Hold for 10 seconds and release to reset to factory setting 8 WPS Button To activate WPS 9 SIM Card Slot To insert SIM Card 3

1.4 LED Indicator Power Off Off Device is OFF Green ON Device is ON Wi-Fi Off Off 2.4GHz Radio is disabled Green On 2.4GHz Radio is enabled Green Blinking 2.4GHz Client connected LAN Off Off LAN Port disconnected Green Blinking LAN Port connected Internet Red On Internet service is not available Green On 2G/3G network connected Green Blinking 2G/3G Internet Service is available Blue On 4G/LTE network connected Blue Blinking 4G/LTE Internet Service is available Mobile Signal Green On 4 LED to indicate the signal strength 4

2 Router Installation 2.1 System Requirement In order to setup PRN3006L you would need to ensure the following item in the list is available. • SIM Card of 2FF size (Mini SIM). • Ethernet Cable with RJ45 connector at both end. • Computer equip with Ethernet Network adapter RJ45 (10Base-T or 100Base-TX or 1000Base- TX). • Wireless Network Adapter capability IEEE802.11b/g/n. • Web Browser (Microsoft Edge, Chrome, Firefox, Opera, or Safari). 2.2 Router Positioning Precaution and preparation step before setup PRN3006L: • Place the PRN3006L in well ventilated place and avoid from exposed to moisture or excessive heat. • Avoid from placing PRN3006L near from strong electromagnetic reference, such as microwaves. • Place PRN3006L where it can be connected to multiple client and power source to ease the installation work. • Place PRN3006L where the mobile signal for the operator carrier have higher mobile signal. • Ensure to use a wired connection during setup process to avoid any possible setup problems. 5

2.3 Hardware Setup Setup Diagram The following is step to setup PRN3006L. Ensure the SIM Card provided by SIM Card Operator is able active. 1. Install 2 units of LTE antenna on the back of PRN3006L. 2. Insert the SIM Card into the slot per the direction shown in the bottom case of the PRN3006L. 3. [Optional – only applicable for PRN3006L with Voice] Connect the PRN3006L’s telephone port to telephone. 4. Connect the power adapter jack over to the PRN3006L’s DC Input and switch ON. 5. Connect the PC/Laptop over to the PRN3006L’s LAN port. 6

3 Getting Started 3.1 TCP/IP Setup By default PRN3006L IP address is 192.168.1.1 and Subnet Mask is 255.255.255.0. You are allow to change the LAN setting base your network architecture. To change the PRN3006L network setting refer to page 22 LAN Setting. On previous chapter we have make a hardware connection setup between PC/Laptop and PRN3006L through LAN port. Ensure your TCP/IP Protocol is set to “Obtain an IP address automatically” for Windows OS or “Using DHCP” for macOS. PRN3006L will assign IP address to connected the PC/Laptop. To verify the connection between PC/Laptop and PRN3006L, you need to run command prompt and execute Ping command to PRN3006L IP address. To execute Ping command you need to type ping 192.168.1.1 then press enter to start ping command. You will get the result as shown. 7

If you encounter different result from above result, it indicate your connection between PC/Laptop and PRN3006L is failed. The following steps is to rectify the connection issue: 1. Check physical connection between PC/Laptop and PRN3006L. Ensure the Ethernet cable is properly inserted into LAN port. At same time observe the LAN LED indicator on PRN3006L and LAN Port LED indicator on PC/Laptop (if applicable). 2. Check for TCP/IP configuration on PC/Laptop to ensure the IP address is provided not overlapping or a valid IP address is given. 8

3.2 Enter Into Web Configuration PRN3006L is equipped with Web-based Utility configuration. Web Configuration is design for easy to setup the PRN3006L for beginner user and advanced user. Web Configuration can be open by multiple OS such as Windows, macOS and Linux. Web Configuration is not restricted to Microsoft Edge only, but user are also able to enter from Mozilla Firefox, Chrome, Opera or Apple Safari. The following steps are for you to enter the Web Configuration of PRN3006L: 1. Run a web browser that available in your computer (Microsoft Edge, Chrome, Mozilla Firefox, Chrome, Opera or Apple Safari). 2. Enter PRN3006L default IP Address (http:// 192.168.1.1 ) onto the URL Address box. You will be redirect to PRN3006L’s Login page. 3. Enter the default Account and Password for PRN3006L. Default Account and Password is “admin” and “password”. If the login is unsuccessful, you will be prompt with notification of incorrect password entered. If you forgot the password, factory reset PRN3006L by press and hold the Reset button using pin for 10 seconds. Reset button can be located on bottom side of PRN3006L (refer to page 3). 9

4. If you have enter a correct Account and Password you will be redirect to Home page of PRN3006L. 10

3.3 Enter Into PROLiNK mWiFi PRN3006L can be monitor and configure through PROLiNK mWiFi mobile application. PROLiNK mWiFi is available on Android and iOS. Using PROLiNK mWiFi you are allow to monitor usage and connectivity, configure mobile network operator information, connection signal strength level, number of connected devices and SMS status. The following steps is to enter PRN3006L configuration using PROLiNK mWifi: 1. Go to Google Play Store for Android and Apple Store for iOS. 2. Install PROLiNK mWiFi on your phone. 3. Ensure your phone Wi-Fi is connect to PRN3006L. Default Wi-Fi PRN3006L password is prolink12345 as shown at the back of PRN3006L sticker. 4. Open PROLiNK mWiFi. 11

5. On the Login page enter the username and password of PRN3006L. By default PRN3006L username/password is admin/password. 6. After successfully login, you will be redirect to PROLiNK mWiFi Home page. 12

3.4 Setup Wizard PRN3006L by default is plug and play. You do not need to configure the PRN3006L. If you would like to configure the PRN3006L, you can configure using PRN3006L’s Setup Wizard. The following steps is to configure PRN3006L using Setup Wizard. 1. Login into PRN3006L’s Web Configuration as explain on page 9 “Enter Into Web Configuration”. 2. Enter the Account and Password correctly. You will be redirect to Home page of PRN3006L. 3. In the Home page click the “Wizard” icon to enter the Setup Wizard. 4. After click on the Wizard icon you will enter the Setup Wizard page 5. Setup Wizard consist of 4 steps. The 1st step is LAN Settings. • IP Address: Enter the LAN IP Address of the router. By default the LAN IP Address is 192.168.1.1. • IP Subnet Mask: Enter the Subnet Mask of the router. By default the subnet is set to 255.255.255.0. 6. 2nd Step for Setup Wizard is WAN Settings. PRN3006L will automatically detect your SIM Card service provider settings. To change the settings, consult with your service provider or leave the setting with default settings. 13

7. 3rd Step is Connection Setting. By default the selection is LAN Mode which will remain the Internet source come from the Cellular network (4G/3G/2G). If you choose WAN Mode, additional Internet source will also available on WAN Port (LAN 2 will change to WAN Port). Leave the setting as default selection. 8. 4th Step is WiFi Settings. You can change the wireless SSID and password for PRN3006L. Default SSID and password as shown at the back of PRN3006L’s sticker. 14

9. Click Done after finish configure all the settings. A confirmation message will pop-up to reconfirm your settings before begin to reboot PRN3006L. Once confirm, PRN3006L will start to reboot. 10. After reboot finish you are redirect to Login page. 15

4 Web Configuration Enter the Web Configuration page by using web browser as describe in “Enter Into Web Configuration” step on page 9. After successfully login, you will be on the Home page where all the Network status and information display. In the Web Configuration several tab is available to configure PRN3006L. The tab consists of Home, Wizard, WAN, LAN, SMS, WiFi, Security and System. 16

4.1 Home Home page provides the current status information about PRN3006L network. All information are continuously update with the currently status. Information consists of LAN, 4G/3G/2G Modem, System, IPV4 WAN, IPV6 WAN, Mobile Network and Dial Type. 17

4.2 WAN WAN page consist of 6 submenus. The submenus are Connection, Connection Setting, APN Setting, 4G/3G/2G Modem, PIN and PLMN. Click one of submenus to enter the WAN relate configuration for PRN3006L. Connection • Preferred Cellular Network: By default Cellular network is set to Auto Mode. It consists of Auto Mode and Manual Mode. • Roaming mode: It is disabled by default. If disabled, data service is not allowed when roaming. If enabled, data service is allowed when roaming, but may incur significant roaming charges. • Press Disconnect or Connect to establish a connection for IPV4 and IPV6 for PRN3006L. 18

Connection Setting • WAN Mode: WAN Mode allowed you to have alternative WAN Access from LAN Port. If you selected for WAN Mode, LAN 2 will change as a WAN Port and your WAN Access will be change to WAN Port. • LAN Mode: By default PRN3006L is on LAN Mode. LAN Mode disable WAN Access through the WAN Port. You WAN access is coming from Cellular Network of the inserted SIM Card. • WAN Connection Type: It is consists of DHCP (Auto Config), STATIC and PPPOE (ADSL). By default PRN3006L is on DHCP (Auto Config). APN Setting • Profile List: A list of profile for you to select. After selecting one profile from the list, you can further modify its parameters. • Profile ID: Show the name of the profile you've selected here. • Name: Name of Profile you have selected from Profile List. 19

• APN: Access Point Name, provided by your ISP. You are recommended to keep the default value. • User: Enter Username of the APN as provided by your ISP. • Password: Enter Password of the APN as provided by your ISP. • PDP Type: Select the type of your PDP (Packet Data Protocol). • Authentication Preference: Some ISPs need a specific authentication type, please confirm it with your ISP or keep the default value. ◦ PAP: Password Authentication Protocol. This protocol allows the device to establish authentication with the peer using two handshakes. Select this option if the ISP requires this authentication type. ◦ CHAP: Challenge Handshake Authentication Protocol. This protocol allows the device to establish authentication with the peer using three handshakes and checking the peer identity periodically. Select this option if the ISP requires this authentication type. 4G/3G/2G Modem • Network Type: The device supports four modes of cellular network connection – Auto, 4G Only, 3G Only and 2G Only. If your SIM card supports WCDMA, select 3G only; if your SIM card supports LTE, select Auto or 4G only as you need, if your SIM Card support GSM then select 2G. PIN • PIN Code: Enter SIM Card Lock Pin if you would like to enable the SIM Card Lock. 20

PLMN • Mode: By default PLMN (Public Land Mobile Network) mode is configure automatically by PRN3006L. If you prefer to set manually select Manual and Consult with your ISP for the PLMN detail. 21

4.3 LAN LAN Page consist of 2 submenus. The submenus is LAN and DHCP. LAN page settings will help you to change the local network settings of PRN3006L and to configure the DHCP Server settings. LAN • IP Address: Enter the IP address you want to use for the router. The default IP address is 192.168.1.1. If you change the IP address, you will need to enter the new IP address in your browser to get into the configuration utility. • IP Subnet Mask: Enter the subnet mask of the router. The default subnet mask is 255.255.255.0. DHCP • DHCP Mode: Select the DHCP Mode for Server or None. By default DHCP is configure as Server. 22

• Start IP and End IP: Enter the range of IPs for the DHCP server to use to assign IP addresses to devices on your network. These values will represent the last octet of the IP addresses in the pool. • Lease Time (minutes): Enter the lease time for IP address assignments. DHCP Leased Hosts is to view the information about the clients attached to the PRN3006L. • Host Name: The name of the DHCP client. • MAC Address: The MAC Address of the DHCP client. • IP Address: The IP address that PRN3006L has allocated to the DHCP client. • Remaining Time: The time of the DHCP client leased. 23

4.4 SMS SMS Page consists of 6 submenus. The submenus is New Message, USSD, InBox, OutBox, DraftBox, and Settings SMS. SMS page will allow you to check, send and configure the SMS message. In this page you also able to use the USSD code to Operator carrier for request. New Message • Send To: Insert the receiver’s phone number. • Messages: Test you message in this box. The message is limit to 160 characters or numbers. Exceeding characters will be sent in the next message. • Save: Click Save to keep the message in the DraftBox • Send: Click Send to send the message to assign number. 24

USSD • USSD CMD: Enter an application activation code and click Send. This will allow you to activate applications by sending an SMS message to your ISP. • USSD Read: Reply message from ISP base on application activation code. • Send: Click Send to send the entered application activation code. InBox • Number: Shows the phone number that sent this message. • Message: Click the message to open and read the message. • Date/Time: Shows the date and time when the message was received. • Delete: Deletes the selected SMS message. • Delete All: To delete the entire message in the InBox. 25

OutBox • Number: Shows the phone number that this message was planned to be sent to. • Message: Click the message to open and read the message. • Date/Time: Shows the time when the message was sent. • Delete: Deletes the selected SMS message. • Delete All: To delete the entire message in the OutBox. DraftBox • Number: Shows the phone number that this message was planned to be sent to. • Message: Click the message to open and read the message. • Date/Time: Shows the time when the message was saved. • Delete: Deletes the selected SMS message. • Send: Send the selected SMS message. • Delete All: To delete the entire message in the DraftBox. 26

Settings SMS • SMSC Address: Enter your SIM Card Service Center number. By default this number will automatically assign base on SIM Card. • Set up: To save the current configuration of SMSC Address. • SMS storage location: Select the location of where the SMS will be store. By default SMS storage location is on local. • Set up: To save the current configuration of SMS storage location. • SMS receipt: By default SMS receipt is set to “not send receipts”, to enable the SMS receipt change the selection to “send receipt”. • Set up: To save the current configuration of SMS receipt. 27

4.5 WiFi WiFi Page consists of 4 submenus. The submenus are Basic, WPS, MAC Filter and Station List. WiFi Page help you to configure Wi-Fi setting, view client list and manage connected client. Basic • Enable: Check this box to enable wireless access. When you enable this option, the following parameters take effect. • Mode: Select the IEEE 802.11 standard used by your wireless clients. 28

• Channel: This field determines which operating frequency will be used. It is not necessary to change the wireless channel unless you notice interference problems with another nearby access point. If you select auto, then AP will choose the best channel automatically. • SSID: Enter the Wireless name for client to be discover and connect. • Hide SSID: By default the setting is uncheck for the wireless signal to be visible. Check the box to hide the SSID from being discover by wireless client. • MAX Clients: Set the number of client limit that are allow to connect to PRN3006L. • Encryption Type: Select the desired wireless encryption mode. You can choose for WEP or WPA Personal. WEP • Authentication Method: Select whether to use AUTO, OPEN SYSTEM or SHARED KEY authentication. • WEP Encryption Length: Select whether to use 64-bit or 128-bit encryption. • WEP Default Key: Select whether to use the TKIP or AES cipher. WPA Personal • WPA Mode: • Cipher Type: Select whether to use the TKIP or AES cipher. • Pre-shared key: Enter the key/password you want to use for your wireless network. The key must be between 8 and 63 characters long, and may only contain letters and numbers. WPS • Enable: Check the box to enable the WPS function and uncheck to disable WPS. • Configure Method: Select the WPS method for client to connect. Select PBC for WPS button. Select PIN is for using WPS PIN. 29

MAC Filter • Active: The status of MAC Filter entry. Y is for activated and N is for deactivated. • Name: A simple name of MAC Filter entry. • MAC Address: The wireless station's MAC address that you want to filter. • Delete: Delete button to remove MAC Filter entry. • Add: To add current MAC Filter entry. • OK: To store current entry of MAC Filter into the list. • Delete All: To delete the entire of MAC Filter list. • Apply: To save and apply current MAC Filter configuration. Station List • MAC Address: MAC Address of connected client. 30

4.6 Security Security Page consists of 3 submenus. The submenus is Firewall, NAT and DMZ. Security page will help you to manage network security of your network. Firewall Configure • Firewall Enable: By default Firewall is set to Disable. To enable the Firewall select Enable. • Packet Allowed: By default Packet Allowed is drop. To enable the Packet Allowed select Accept. IPV4 Firewall Entries The IPV4 rules section allows you to specify the kind of traffic that is allowed to pass through the network. 31

IPV6 Firewall Entries The IPV6 rules section allows you to specify the kind of traffic that is allowed to pass through the network. NAT Configure • NAT Type: Select NAT type for Symmetric, Port Restricted, Full Cone or Address Restricted. • IPSEC VPN Pass Through: Internet Protocol security (IPSec) is a suite of protocols for ensuring private, secure communications over Internet Protocol (IP) networks, through the use of cryptographic security services. Click Enable to allow IPSec tunnels to pass through the router. • PPTP VPN Pass Through: Point-to-Point Tunneling Protocol (PPTP) allows the Point-to- Point Protocol (PPP) to be tunneled through an IP network. Click Enable to allow PPTP tunnels to pass through the router. • L2TP VPN Pass Through: Layer Two Tunneling Protocol (L2TP) is the method used to enable Point-to-Point sessions via the Internet on the Layer Two level. Click Enable to allow L2TP tunnels to pass through the router. • Webserver WWAN Access: To allow Web Configuration access through WAN. Click Enable to allow Webserver WWAN Access. 32

Virtual Server PRN3006L can be configured as a virtual server so that users can access services such as Web or FTP via the public (WAN) IP address of the router. • #: To identifies the rule. • IP: Enter IP Address of the computer on your local network that host the service. • Private Port: Enter Port number of the computer on your local network that you want to forward the service port. • Global Port: Enter the global ports you want to open. • Protocol: Select the service protocol type for ICMP, TCP or UDP. • Delete: Click to remove the virtual service entry from the list. • Add: To add current Virtual Server entry. • OK: To store current entry of Virtual Server into the list. • Delete All: To delete the entire list of Virtual Server. • Apply: To save and apply current Virtual Server configuration. DMZ DMZ host allows one local host to be exposed to the Internet for a special-purpose service. To assign the local host with DMZ simply enter the IP Address of the local host into the box. 33

4.7 System System Page consists of 9 submenus. The submenus are About, QOS, Configuration, Firmware Upgrade, Password, Date and Time, Language, UPnP and Reboot. System page provides you information and configuration for PRN3006L system setting. About About show all the information relate to device system information such as Device Name, FW Version, IMEI number and Baseband Version. 34

QOS • #: To identifies the rule. • Enable QoS Packet Filter: Check the box to enable QoS function. • Upstream bandwidth: Specify the maximum upstream bandwidth in Kbps. • Local IP and Port: Specify the local IP address and port for the rule to affect. • Remote IP and Port: Specify the remote IP address and port for the rule to affect. • Enable: Check the box to enable the specified rule. • Delete: Click the bin icon to remove the QoS entries. Configuration This section is to restore all settings back to their defaults. Any settings that have not been backed up will be lost, including any rules that you have created. To begin factory reset PRN3006L, click Reset. Firmware Upgrade Remote Server Remote Server firmware upgrade allow you to upgrade PRN3006L through server. 35

Manual Manual firmware upgrade allow you to manually upgrade the firmware through your local directory. Password • Session Timeout (Min): Duration of inactive before user begin to for logout. Value is in minute. • New password: Enter new password. • Retype new password: Re-enter new password. Date and Time • Current System Time: Display current date and time. • Sync with host: Sync current date and time with connected host. • Time Zone: Select the appropriate Time Zone from the drop-down box. • Enable Daylight Saving: Check the box to allow for daylight saving adjustments. Use the drop-down boxes to specify a start date and end date for daylight saving time adjustments. • Time Server Address: Enter an NTP server to use for time synchronization. 36

Language • Language: Select a language for the Web Configuration by click on the drop-down menu. UPnP • UPnP: Check the box to enable the UPnP function. Reboot Click Reboot button on the submenus to reboot PRN3006L. 37

5 Frequently Ask Question (FAQ) (1) Does PRN3006L and PRN3006L with Voice supports SIM Card Hot-Plug? ➢ It is NOT recommended to insert SIM Card when PRN3006L or PRN3006L with Voice is powered On as it may damage the SIM Card or the device. Please power Off the PRN3006L or PRN3006L with Voice before inserting SIM Card. (2) Why does the PRN3006L unable to surf internet after inserting SIM Card? ➢ In the event that the Internet connection is not available even after inserting SIM Card, configure the PROLiNK PRN3006L as follows: i. Contact your Service Provider / Operator for APN setting information required for manual APN setting through the Web Configuration. ii. Launch an Internet Browser and go to http://192.168.1.1. iii. Click on WAN and navigate to APN Setting to key in all the information provided by the Service Provider / Operator. 38

Note: Please be informed that it is not recommended to insert SIM Card while PRN3006L is powered On. (3) Why does the PRN3006L with voice switches itself to 3G mode during call? ➢ For PRN3006L with Voice, VoLTE or Call-Switch function is subject to the subscription plan of the respective SIM Card and the operator. If the PRN3006L with Voice switches itself to 3G during call, it may be due to: i. Call-switch function is in effect. ii. 4G signal drops below threshold. (4) How does Call Switch Function works and how does it impact the Internet access? ➢ For PRN3006L with Voice, when there is an Incoming / Outgoing call, it may switch itself to 3G mode, Call will be maintained and Internet Access may drop for awhile and resume a few seconds later (subject to operator). (5) Why is the 4G LTE signal of PRN3006L/PRN3006L with voice is unclear? ➢ Unclear voice may cause by the low 4G LTE signal. To improve 4G LTE signal follow the following method: i. Please check 2 external antennas connected onto SMA sockets and make sure connected properly. ii. Please relocate the device to the location near the window/door in order to receive the best signal from the 4G LTE base station outside. 39

6 Technical Specification Physical Specification Physical Dimension 129x117x35mm Weight 195g Communication System (WAN) Communication System (WAN) Frequency Bands LTE B1/B3/B5/B7/B8/B20/B38/B40 UMTS Band 1, 8 GSM 850/900/1800 MHz Bandwidth LTE Band 1.4/3/5/10/15/20 MHz, comply with 3GPP Modulation Downlink QPSK/16-QAM/64-QAM, comply with 3GPP Uplink QPSK/16-QAM, comply with 3GPP RF Power Level LTE FDD Power Class 3 (23 +/-2dBm) UMTS Power Class 3 (24 +1.7/-3.7dBm) EDGE Power Class E2 (GSM850/900: 27dBm; DCS/PCS: 26dBm) GPRS GSM850/900 Power Class 4: 33dBm; DCS/PCS Power Class 1: 30dBm) Data Rate 4G 3GPP Cat. 4, Downlink/Uplink up to 150Mbps/50Mbps 3G 3GPP Downlink/Uplink up to 42Mbps/5.76Mbps 3GPP2 Downlink/Uplink up to 3.1Mbps/1.8Mbps (MDM9607 only) 2G EGPRS Class33 Downlink/Uplink up to 296Kbps/236.8Kbps 40

Wireless LAN Specification Wireless LAN Frequency 2.4GHz Protocol 802.11b/g/n, 20/40M Channel 1 ~ 11 Antenna Internal Antenna ( 2 x 2 ) Feature Feature Interface LAN/WAN 2xRJ45 for 2xLANs or 1xWAN+1xLAN (Optional) RJ11 (Optional) CS Voice, VoLTE (optional) USIM Single, 2FF Antenna 2x LTE External Antenna Power Jack DC Input (12V 1A) LED Power Power Status Indicator (Red & Green) Internet Internet Connection Status Indicator/(4G/3G/2G Network Status Indicator)（RGB tri-colour LED） Wi-Fi Wi-Fi Status Indicator(Green single LED) Signal Strength 4 LED for signal strength (Four Green single LED) Button Power On/off WPS Enable /Disable WPS Reset Restore Factory Settings WebUI System Connection Status Statistics Device Management Mobile Service SMS Manager Automatic APN matching according to USIM Auto Data Connection USSD Service PIN/PUK Management Network Mode Selection(2G/3G/LTE/Auto) 41

Router 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK encryptions IPv4/v6 VPN Passthrough Dynamic IP/Static IP/PPPoE Virtual Server, UPnP, DMZ DoS, SPI Firewall, IP/MAC Address Filter IP and MAC Address Binding Traffic Control (IP QoS) Local Management, Remote Management Environment Environment Power Supply 2.4GHz Working Temperature 802.11b/g/n, 20/40M Storage Temperature 1 ~ 11 Certification Certification Certification CE RoHS 42