Tynetec Aidcall Manual
Text of the manual
Doc No. FM0850 issue A Page 1
169MHz Telecare Devices
Smoke Detector
__________________________________________________________________________________________________________
•
Compatible with Reach at-home alarms, Advent XT warden call,
Altec Response and Touchsafe Pro Nursecall systems
•
Thermoptek multi-sensor technology
•
Alarm sound level: 85dB(A
Doc No. FM0850 issue A Page 2
Alarm Condition
The unit will repeatedly sound 3 loud beeps and the red light will flash every second.
Check if there is a fire hazard and leave the building.
DANGER: Never ignore any alarm. If you are not certain of the cause, leave the building immediately.
Alarm Silence
In the event of a known false alarm you can temporarily
Doc No. FM0850 issue A Page 3
Registering a Smoke Detector onto a Reach at-home alarm unit
1. Put the Reach unit into radio device learn mode…
2. Activate the smoke detector…
3. Exit radio device learn mode…
4. Check with the Control Centre that it is convenient to perform a test call, activate the smoke detector and confirm they receive a
smoke alarm
Doc No. FM0850 issue A Page 4
Registering a Smoke Detector onto an Advent xt warden call system
1. Put the Advent xt system into radio device learn mode…
2. Activate the smoke detector…
3. Exit the Advent xt system radio device learn mode…
4. Activate the smoke detector and check a smoke alarm call is reported on the warden call system.
Deleting a Smok
Doc No. FM0850 issue A Page 5
Registering a Smoke Detector onto an Altec Response local carer alarm unit
1. Put the Altec Response unit into radio device learn mode…
2. Activate the smoke detector…
3. Exit the Altec Response radio device learn mode…
4. Activate the smoke detector and check a smoke alarm call is displayed on the Altec Response unit.
Del
