Wireworks Eclipse Installation And Care

Specifications

Brand: Wireworks
Category: Indoor Furnishing
Model: Eclipse
File Type: PDF
File Size: —
Pages: 2

Read Online

Read the Wireworks Eclipse Installation And Care online using the built-in PDF viewer.

Text of the manual

A Fit backboard to wall using supplied wall screws

and wall plugs if suitable. Check backboard will support upto 8kg before fixing other components. Consider where you want the magnifier mirror positioned before fixing backboard. B Position the large flat round mirror over the backboard so that the mirror screws can be fixed from the side edge to the backboard and mirror. Tighten screws with a screwdriver. x 2 wall screws x 2 wall plugs x 6 mirror screws x 1 ball joint Fixings included: backboard .wireworks london Eclipse Wall Mirror - Installation and Care Thank you for purchasing this wall mirror. Please read instructions carefully before use to ensure safe and satisfactory operation of this product. It is recommended that this mirror is fitted only by persons competent in DIY. The Mirror is supplied with screws and wall plugs suitable for a stone or brick wall. For all other wall types (eg. hollow plasterboard) alternative fixings will be required. If in doubt consult a qualified person. You will need a power drill, masonary drill bit, cross-head screw driver and adjustable spanner to install this product. Ensure the wall surface is of suitable strength and construction before fixing the mirror. magnifier mirror position W large flat round mirror

C Fit the locking strip using four mirror screws.

Tighten using a screwdriver. Check the mirror is securely fastened. D Using a spanner fit the the ball joint tightly into the backboard. End B goes into the backboard. Fit the magnifying mirror onto the ball joint, secure tightly using a spanner. End A goes into the magnifying mirror. Check the magnify mirror and ball joint do not come loose when the magnify mirror is turned. Tighten if necessary. A B locking strip ball joint .wireworks london Before use check the mirror is secure and the magnify mirror does not loosen when rotated. Clean wood using a soft damp cloth. Use glass cleaners for the mirror. Fit in accordance with manufacturers instructions. Retain for future use. Complies with: BS7449:1991 Mirror thickness 3mm flm backed Model ref: BA.ECLIPSE A B back board magnify mirror spanner spanner