Winners Only DC34257GT Assembly Instructions

MADE IN MALAYSIA Page 1 of 3 DC34257GT/B / DC34257RT/B DC34257GT/B -01/ DC344257RT/B-01 DC34257GT/B -08/ DC344257RT/B-08 DC34257GT/B -07/ DC344257RT/B-07 DC34257GT/B -07/ DC344257RT/B-07 DC34257GT -13/ DC344257RT-13 DC34257GT -02/ DC344257RT-02 DC34257GT -09/ DC344257RT-09 DC34257GT -10/ DC344257RT-10 DC34257GT -12/ DC344257RT-12 DC34257GT -05/ DC344257RT-05 DC34257GT -20/ DC344257RT-20 DC34257GT/B -13/ DC344257RT/B-13 Thank you for purchasing this quality product.Be sure to check all packaging material carefully for small parts that may have come loose inside the carton during shipment. COMPONENT LIST:DC34257GT/RT HARDWARE LIST: Flat Washer Lock Washer (Small) Allen Key M4 Allen Key M5 Flat Washer (small) Hex Nut JCBC Bolt JCBB Bolt Lock Washer Wrench 4pcs 20 pcs 20 pcs 16 pcs 10 pcs 10 pcs 10 pcs 1pce 1pce 1pce PART NO FIGURE DESCRIPTION QTY 1 pce 1 2 3 4 5 6 7 8 9 10 Hardware Bag 1 pce PART NO FIGURE DESCRIPTION QTY This product will take 15-20 minutes to assemble. Reminders 1.Use only the hardware supplied. 2.Once the product is assemble,level and tighten all the bolts. 3.Do not over-tighten bolts. 4.This item may require periodic tightening NOTE: 1.Two or two people are needed for assembly 2 please keep all hardware parts out of the reach of children. WINNERS ONLY DC34257GB -08/ DC344257RB-08 DC34257GB -07/ DC344257RB-07 DC34257GB -07/ DC344257RB-07 DC34257GB -19/ DC344257RB-19 DC34257GB -20/ DC344257RB-20 DC34257GB -18/ DC344257RB-18 Pedestal Stand Mounting Plate Side Plate Pedestal Leg #1 Pedestal Leg #2 COMPONENT LIST:DC34257GB/RB PART NO FIGURE DESCRIPTION QTY 1 pce 1 pce 4 pcs 4 pcs 2 pcs Apron Hinge Table Top Glides Apron Leaf Leaf Hinge Support Leaf Hinge Table Hook 4 pcs 4 pcs 2 pcs 2 pcs 2 pcs 3 pcs Adjustable Leveler 4 pcs

TBS-16534-PGNWU / TBS-16535-PGNWU MADE IN MALAYSIA Page 2 of 3 1.1-Turn the Table Pedestal stand upside down. Attached the base pedestal leg #1 to pedestal leg #2 using the provided hardware as shown on Fig.1. 1.2-Attached the this Assemble base Legs (1&2) to the pedestal stand with the provided hardware as shown on Fig 1. 2.1-Turn table top upside down on a soft protective surface such as a carpet , Attached Table Mounting plate to the table top using the provided hardware as shown on FIg 2. 2.2- Turn table top upright position and attached the base assembly to the table top using the provided hardware as show on Fig 3. ASSEMBLY : STEP 1 STEP 3 FIg.3 FIg.1 FIg.2 WINNERS ONLY STEP 1 STEP 2 Level Glide Wrench Wrench Allen Key M5 Allen Key M4 Allen Key M4 Lock Washer JCBB Bolt JCBC Bolt JCBC Bolt Hex Nut Hex Nut Lock Washer Lock Washer Lock Washer (Small) Lock Washer (Small) Flat Washer Flat Washer Flat Washer (Small) Flat Washer (Small) Flat Washer Unlock Hook

MADE IN MALAYSIA Page 3 of 3 CARE INSTRUCTION ~ Be sure to use the same type of polish consistenly. Your furniture will appear cloudy or streaky if oil based or wax based polishes are interchanged. ~ Spray your furniture surface evenly. Wipe in a circular motion with a soft clean cloth. ASSEMBLY : 4.1-Lift up the center leaf from the compartment. 4.2-Flip down the aprons and fold the centre leaf to store within the compartment STEP 4 5.1-Push table top from both ends to close.Lock the hooks underneath the table. STEP 5 DC34257GT/B / DC34257RT/B WINNERS ONLY Unlock Hook Flip down Apron Lock Hook