Whirlpool ADP 253 WH Manual
Text of the manual
BEFORE USING THE DISHWASHER
PAGE 11
PROTECTING THE ENVIRONMENT
PAGE 11
PRECAUTIONS AND GENERAL RECOMMENDATIONS
PAGE 11
CONNECTIONS
PAGE 12
ELECTRICAL CONNECTION
PAGE 13
HOW TO FILL THE SALT CONTAINER
PAGE 14
HOW TO FILL THE RINSE AID DISPENSER
PAGE 15
HOW TO FILL THE DETERGENT DISPENSER
PAGE 16
CARE AND MAINTENANCE
PAGE 17
To make the most of
1. Removing the packaging and check
After unpacking, make sure that the
dishwasher is undamaged and that the door
closes correctly. If in doubt, contact a
qualified technician or your local retailer.
• Keep the packaging materials (plastic bags,
etc.) out of children's reach, as they are
potentially dangerous.
2. Water and electrical connections
Do not use the dishwasher if it has been
damaged in transit. Consult our After-Sales
Service or your local retailer.
(Refer to the separate assembly instructions
booklet)
Water inlet and drain:
•
Observe any special regulations issued by
your local Water Board.
•
Make sure the inlet and drain hoses are kink-
free and are not crushed.
•
If the hose l
For Great Britain Only
Warning - this appliance must be
earthed
Fuse replacement
If the mains lead of this appliance is fitted with a
BS 1363A 13amp fused plug, to change a fuse in
this type of plug use an A.S.T.A. approved fuse
to BS 1362 type and proceed as follows:
1. Remove the fuse cover (A) and fuse (B).
2. Fit replacement 13A fuse into fuse cover.
To ensure the dishwasher works at its best, soft
water, i.e. water that is lime-free, is required. The
presence of lime in tap water causes water stains
due to calcium deposits on crockery and glasses.
A water softening system has been built in the
dishwasher to ensure a steady supply of soft
water. This is basically a decalcifying system,
which needs to
