Viavi MTS 2000 Quick Card
Text of the manual
T-BERD®/MTS-2000 Modular Test Set
Setting up the T-BERD/MTS-2000 as a Wireless Access
Point for remote access with Smart Access Anywhere™
The VIAVI Smart Access Anywhere (SAA) software application allows a user to remotely operate a
T-BERD/MTS-2000 and to transfer configuration files, test reports and other data between the test set
and a personal computer (PC), smartphone, or tablet. This procedure describes the steps to make the
test set serve as a wireless access point (AP) so a local iPhone, iPad, Android, or Laptop can connect to
it via Wi-Fi.
Equipment Requirements:
• T-BERD/MTS-2000 Test Set equipped with the following:
o Software Release V16.22 or greater
o Wireless option for Wi-Fi Connectivity
Setting up the T-BERD/MTS-2000:
1.
Press the ON/OFF button to turn on the test set.
2.
Press the HOME button to display the Home Screen.
Figure 1: Home Screen
3.
Tap the Connectivity icon to display connectivity options.
4.
Tap the Wireless 802.11 icon to display Wireless Connectivity settings.
Contact Us +1 844 GO VIAVI
(+1 844 468 4284)
To reach the VIAVI office nearest you,
visit viavisolutions.com/contacts.
© 2018 VIAVI Solutions Inc.
Product specifications and descriptions in this
document are subject to change without notice.
5.
If the screen displays “Wireless is disabled”, press the Wireless soft key to enable
Wi-Fi.
6.
Set Wlan Mode to AP Master. Once this mode is selected, the SSID and the IP
Address and IP Subnet Mask of the test set are displayed. The assigned SSID is
2000_XXXXX where XXXXX is the serial number of the test set.
7.
Press the Create Network soft key to enable the AP Master and advertise the SSID via
Wi-Fi. The soft key will be grayed out.
Figure 2: Wireless Connectivity settings
8.
Tap the Exit soft key to return to the Connectivity screen. The IP Address and SSID
(called Hosting Access Point on this page) are displayed in this screen.
Figure 3: Connectivity screen
9.
Connect to the test set’s Wireless SSID, 2000_XXXXX, from your Laptop, iPhone, iPAD,
or Android device.
10.
Use the Smart Access Anywhere app to access the test set.
