Dremel 1680 Owner's Manual

contact tool or extension cord. All visi- tors should be kept away from work area. KEEP WORK AREAS CLEAN Cluttered areas and benches invite accidents. MAKE WORKSHOP CHILD-PROOF With padlocks, master switches. AVOID DANGEROUS ENVIRONMENTS Don't use power tools in damp or wet locations. Keep work area well lit. Do not expose power tools to rain. Do not use the tool in the presence of ...

for operating your Scroll Saw to get the best results and to minimize the likelihood of per- sonal injury. AND 5. ALWAYS OBSERVE THE SAFETY PRE- CAUTIONS HERE AND ON PAGES 2, 3, 4, 1. Protection: Eyes, Hands, Face, Ears and Body TO AVOID BEING PULLED INTO THE BLADE-- DO NOT WEAR: Loose Fitting Gloves Necktie Loose Clothing Jewelry DO: TIE BACK LONG HAIR ROLL LONG SLEEVES ABOVE ELBOWS o o The saw does not cut wood by itself. You allow the saw to cut wood by guiding the wood into the blade as it moves. The blade teeth cut ONLY on the down str ...

It will do the job better and safer at the rate for which it was designed. USE THE RIGHT TOOL Don't force a small tool or attachment to do the job of a heavy duty tool. Don't used tool for purpose not intend- ed-for example, don't use a circular saw for cutting tree limbs or logs. SECURE WORK Use clamps or a vise to hold work when practical. It's safer than using your hand and it frees both hands to operate the tool. NEVER LEAVE TOOL RUNNING UNATTENDED Turn power off. Don't leave tool until it comes to a com- plete stop. Tool Care DO NOT ALTER OR MISUSE TOOL These too ...

Plywood An alternative method of securing your Scroll Saw is to fasten the Scroll Saw base to a mounting board 18" x 24". Any good grade of plywood with a 3/4" minimum thick- ness is recommended. Follow the instructions for "Mounting the Scroll Saw to a Bench", substituting the 18" x 24" board for the workbench and using 1/4"-20 Flat Head Screws for the Hex Screws (Fig.15). Note: For proper stability, holes must be counter sunk so screw heads are flush with the bottom surface of the sup- porting board. Securely clamp board to wor ...