Senix HT4QL-L Operator's Manual

Specifications

Brand:	Senix
Category:	Trimmer
Model:	HT4QL-L
File Type:	PDF
File Size:	—
Pages:	56

Download

Download PDF Manual (56 pages)

Read Online

Read the Senix HT4QL-L Operator's Manual online using the built-in PDF viewer.

Text of the manual

4-Cycle 1.62 cu in. (26.5 cc)

Engine Gasoline Powered Hedge Trimmer Operator’s manual Model: HT4QL-L For customer support, please call 1-800-261-3981 or send email to: [email protected] SAVE THIS MANUAL FOR FUTURE REFERENCE.

This operator’s manual describes safety and international symbols and pictographs that may appear on this product.

Read the operator’s manual for complete safety, assembly, operating and maintenance and repair information. To reduce the risk of injury, user must read instruction manual. DO NOT USE E85 FUEL IN THIS UNIT CAUTION: It has been proven that fuel containing greater than 10% ethanol will likely damage this engine and void the warranty. Always use clean, fresh unleaded fuel. Refer to operator’s manual for the proper type of oil. �� cylinder. You may get burned. These parts get extremely hot from operation. They remain hot for a short time after the unit is turned off. Keep all bystanders at least 50 ft. away. DANGER! Risk of electrocution! Wear hand protection. Wear non-slip safety footwear. Failure to keep your hands away from the blade will result in serious personal injury. Avoid power lines, use in dry conditions Do not expose to rain. Indicates danger, warning or caution. Precautions that involve your safety. Thrown objects and loud noise can cause severe eye injury and hearing loss. Wear eye protection meeting current ANSI Z87.1 standards and ear protection when operating this unit. Wear head protection when operating this unit. Fallen objects can cause severe head injury. Use a full face shield when needed. Thrown objects can ricochet and result in personal injury or property damage.

KNOW YOUR UNIT...........................................................................6

SPECIFICATIONS*............................................................................6 UNPACKING......................................................................................7 OPERATION......................................................................................8 MAINTENANCE...............................................................................12 TROUBLESHOOTING.....................................................................15 PARTS..............................................................................................16 PARTS LIST.....................................................................................17 WARRANTY.....................................................................................18 1. Proper safety precautions must be observed. Like all power equipment this unit must be handled carefully. DO NOT EXPOSE YOURSELF OR OTHERS TO DANGER. Follow these general rules. Do not permit others to use this unit unless they are thoroughly �� Signals an EXTREME hazard. Failure to obey a safety �� symbol�� result in serious injury or death to yourself or to others. Crude oil, gasoline, diesel fuel and other petroleum products can expose you to chemicals including toluene and benzene, which are known to the State of California to cause cancer and birth defects or other reproductive harm. These exposures can occur in and around oil �� operations such as pipelines, marine terminals, tank trucks and other facilities and equipment. For more information go to: www.P65Warnings.ca.gov/petroleum. Signals a SERIOUS hazard. Failure to obey a safety �� symbol �� result in serious injury to yourself or to others. Signals a MODERATE hazard. Failure to obey a safety �� symbol �� result in property damage or injury to yourself or to others. �� his product contains a chemical known to the state of California to cause cancer, birth defects or other reproductive harm. �� Advises you of information or instructions vital to the operation or maintenance of the equipment. responsible and have read, and understood the manual and are trained in the operation of the unit. 2. Always wear safety goggles for eye protection. Dress properly. Do not wear loose clothing or jewelry that could become caught in moving parts of the unit. Safe, sturdy, nonskid footwear should always be worn. Always wear heavy, long pants, boots, gloves, and a long-sleeve shirt. Do not wear loose clothing, jewelry, short pants, sandals, or go barefoot. Secure hair so it is above shoulder level. Long hair should be tied back. It is recommended that legs and feet be �� 3. Inspect the entire unit for loose parts (nuts, bolts, screws, etc.) and any damage before start and operation. Repair or replace as necessary before using the machine. 4. Modifying the unit or installing non-Senix attachments can make your unit unsafe. Non-Senix attachments are usually designed for universal applications. �� could make the unsafe. Do not remove the cutting head shield or modify the unit in any way that would alter its design or operation. This could make it unsafe.Serious injury to the operator or bystanders could result as well as damage to the machine. 5. Keep the handles free from oil and fuel. �� conditions. 7. Do not operate the unit when you are tired, when your concentration is impaired and/or under the �� 8. Always use proper handles when trimming. �� 11. Always store fuel in a properly marked container that is approved by local codes and ordinances for such usage. 12. Never remove the fuel tank cap while the engine is running. 13. Never start or run the product inside a closed room or building. Fumes from the exhaust contain dangerous carbon monoxide. 14. Never attempt to make engine adjustments while the unit is running. Always make engine �� surface. 15. Do not use the unit if it is damaged or poorly adjusted. Never remove the unit’s guard. Serious injury to the operator or bystanders could result as well as damage to the machine. 16. Keep children away. Onlookers should be kept

the unit is being used over long periods of time or not

adequately managed and properly maintained. Even when the unit is used as prescribed it is not possible to eliminate all residual risk factors. The following hazards may arise in connection with the unit’s construction and design: �� interfere with active or passive medical implants. To reduce the risk of serious or fatal injury, we recommend persons with medical implants to consult their physician and the medical implant manufacturer before operating this unit. Inspect unit before each use. Replace damaged parts. Check for fuel leaks. Make sure all fasteners are in place and secure. Replace parts that are cracked, chipped, or damaged in any way. Make sure the cutting attachment is properly installed and securely fastened. at a safe distance from the work area, at least 15 METERS (50 FEET) away. 17. Never leave the unit unattended while the engine is running. 18. Uses other than those intended by the manufacturer can result in injury to the operator or damage to the unit and other property. 19. Do not overreach. Keep proper footing and balance at all times. Do not use the unit while standing on a ladder or on any other unstable footing location. 20. FOLLOW INSTRUCTIONS for assembling and operation. 21. Do not store the unit in a closed area where fuel �� heaters, furnaces, etc. Store in a locked, well ventilated area only. 22. Ensure safe and proper performance of your unit. Please only use original accessories. The use of any other accessories or attachments may cause a potential hazard or injury to the user, damage to the unit, and void the warranty. 23. If the unit will not be used for a long time, clean the unit completely, especially the fuel/oil tank, its �� it is cooled down. Never refuel when the engine is running or hot. When gasoline spills, be sure to wipe it up completely and dispose of those materials before starting the engine. 25. Stay clear of other workers or bystanders by at least 15 meters/50 feet. 26. Whenever approaching an operator of the unit, �� operator stops the engine. Be careful not to startle or distract the operator which can cause an unsafe situation. 27. The engine should be turned off when the unit is moved between work areas. 28. Pay attention to loosening and overheating parts. If there is any abnormality of the unit, stop operation immediately and check the unit carefully. If necessary, have the unit serviced by customer support. Never continue to operate a unit which may be malfunctioning. 29. In start-up or during operation of the engine, never �� wire, or the spark plug. �� Never place the unit in any places where there are �� gasses, or combustible liquids. 31. Pay special attention to operation in the rain or just after the rain as the ground may be slippery. 32. If you slip or fall to the ground, release the throttle lever immediately. 33. Be careful not to drop the unit or hit it against obstacles. 34. Before proceeding to adjust or repair the unit, be sure to stop the engine and detach the spark plug. 35. When the machine is placed in storage for a long time, drain fuel/oil from the fuel/oil tank and carburetor, clean the parts, and move the machine to a safe place. 36. Make periodic inspections to ensure safe and �� your unit, contact customer support. �� 38. Keep your body warm, especially the head, neck, feet, ankles, hands, and wrists. 39. Maintain good blood circulation by performing vigorous arm exercises during frequent work breaks and also by not smoking. 40. Limit the hours of operation. 41. If you experience discomfort, redness and swelling �� feeling, consult your physician before further exposing yourself to cold and vibration. 42. Always wear ear protection. Loud noises for long periods can cause hearing loss, even permanent deafness. 43. Wear no-slip heavy duty work gloves to improve your grip on the handle. Gloves also reduce the transmission of machine vibration to your hands. 44. Do not lay the machine on the side; otherwise the fuel could spill out. 45. Fuel evaporation during refueling and exhaust gases are harmful to the operator and people around the unit. 46. Make sure that the fuel evaporation and exhaust gases will not drift to the face of operator and keep other people away from your working area. 47. Do not allow children or untrained individuals to use this unit.

assembling, adjusting or cleaning, and before leaving

the machine unattended for any period. �� should have practical instruction in the use of the unit and the protective equipment from an experienced operator. �� (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. �� apprentices older than 16 years and under supervision, may not operate the product. The same �� know how to handle the product. �� completely before placing it down. �� service representative. �� blades when in operation. Before you start the hedge trimmer, make sure the cutting blades are not contacting anything. �� hold the hedge trimmer with your right hand on the rear handle and your left hand on the front handle. Holding the hedge trimmer (left hand on rear handle, right hand on front handle) may affect the balance of the trimmer and will increase the risk of injury. �� when blades are moving. Make sure the switch is off when clearing jammed material. Blades coast after turn off. �� avoid electric shock in case the cutting blades contact hidden wiring. Cutting blades contacting a live wire may make exposed metal parts of the power tool live and can give the operator an electric shock. �� extension cables. Check for foreign objects in the hedges such as wire fences before operation. �� footing during operation. Slippery or unstable surfaces such as ladders may cause a loss of balance or control. �� cutter blades stopped. Always protect the blades with a scabbard (blade cover) when transporting or �� Do not operate the unit inside a closed environment, such as a room or building; breathing carbon monoxide from exhaust fumes can kill. Pour fuel outdoors where there are no sparks and �� the engine. Do not smoke while fueling or mixing fuel. Wipe spilled fuel from the unit. Move at least 3 m (10 ft) away from the fueling source and site before starting engine. Do not operate near electrical power lines. The unit has not been designed to provide protection from electric shock in the event of contact with overhead electric lines. Consult local regulations for safe distances from overhead electric power lines and ensure that the operating position is safe and secure before operating the unit. If you use this tool incorrectly, you can suffer serious personal injury! storing the hedge trimmer. Carefully handling the hedge trimmer greatly reduces the risk of accidentally touching the sharp cutting blades. �� complete stop before removing the battery. �� grease. Slippery handles may lead to a loss of control. Never attempt to use an incomplete or altered tool. �� persons with an impaired physical, sensory or mental �� knowledge or experience. �� sharpening. �� to operate this device. �� damage. If any parts or pieces appear to be missing or damaged, do not operate the hedge trimmer. �� particularly during lightening and rain. �� work with the cutting blades sharpened according to regulations. �� designed.

Engine type......................................................................................................................................Air-Cooled, 4-Cycle

Displacement...................................................................................................................................1.62 cu in. (26.5 cc) Spark plug gap...........................................................................................................0.025 in. - 0.31 in. (0.6 - 0.8 mm) Lubrication..................................................................................................................................................SAE 10W-30 Crankcase lubrication capacity..............................................................................................................2.01 oz. (60 ml) Fuel Type..........................................................................................................................................Unleaded gasoline Fuel tank capacity................................................................................................................................9.46 oz. (280 ml) Cutting blade length............................................................................................................................22.0 in. (560 mm) Cutting Capacity....................................................................................................................................................1 1/8'' Noise level............................................................................................................................................................103dB Weight (fully assembled, without fuel or oil).....................................................................................11.42 lbs. (5.18 kg) �� to make changes at any time without notice. �� On/Off Switch Starter Grip Oil Tank Cap Protective Cover Throttle Primer Bulb Throttle Lockout Choke Button Fuel Tank Cap Muffler

Senix HT4QL-L Operator's Manual

Specifications

Download

Read Online

Text of the manual

4-Cycle 1.62 cu in. (26.5 cc)

This operator’s manual describes safety and international symbols and pictographs that may appear on this product.

KNOW YOUR UNIT...........................................................................6

the unit is being used over long periods of time or not

assembling, adjusting or cleaning, and before leaving

Engine type......................................................................................................................................Air-Cooled, 4-Cycle

Carefully remove the product and any accessories from

Do not use any attachments or accessories not

Always position the unit on the operator’s right side. The

not bend over.

while the engine is running.

To avoid serious personal injury, always stop the engine

The cutting blades should never move at idle. Turn the

Install the guide bar cover when transporting to prevent

The fuel tank is empty

Oil box cap assy

3-year limited warranty on all Senix 4QL series gasoline powered equipment.

Cortadora de arbustos con motor de

Este manual del operador describe los símbolos de seguridad e internacionales y las imágenes que puedan

CONOZCA SU UNIDAD...............................................................25

9. No fume cuando esté llenando el depósito.

de vibraciones si la unidad se durante por períodos

armar, ajustar o limpiar la máquina, y antes de dejarla

Tipo de motor.........................................................................................................................Enfriado por aire, 4 ciclos

1. Desenrosque la tapa del aceite del motor y retírela.

No use ningún aditamento o accesorio que no haya

Siempre coloque la unidad en el lado derecho del

Mantenga recto el brazo izquierdo.

mientras el motor está funcionando.

Para evitar lesiones personales graves, apague

Las cuchillas nunca se deben mover con el motor a

No retire el cable de la bujía cuando el motor está

Si necesita más asistencia, lleve la unidad a un proveedor de servicio autorizado.

Conjunto de arranque

Garantía limitada de 3 años para todos los equipos a gasolina de la serie Senix 4QL.

Taille-haie à essence - Moteur à 4

Ce manuel d'instructions décrit les symboles et pictogrammes de sécurité et internationaux susceptibles

Signale un danger EXTRÊME. Le non-respect du

personnes, ou d'endommager l'appareil.

lames de coupe lors du fonctionnement. Avant de

de procéder à un assemblage, un réglage ou au

Type de moteur...........................................................................................................................Refroidi à l'air, 4 temps

Retirez délicatement le produit et tous les accessoires

N’utilisez pas des accessoires ou des pièces non

Le boîtier du moteur peut chauffer pendant le

vous penchez pas.

matériaux coincés pendant que le moteur tourne.

Pour éviter de graves blessures, arrêtez toujours le

Les lames ne doivent pas bouger lorsque l'appareil

Installez le couvercle du guide-chaîne lors du transport

Le réservoir de carburant est vide.

Assemblage de démarrage

Garantie limitée de 3 ans sur tous les équipements à essence de la série Senix 4QL.

Other Trimmer Manuals