VeriFone UX301 Quick Reference Manual

12 2.8 Validating account information You can view account information on the Setup menu. To access the Setup menu, you can restart the application (page 13). During start up, press the FUNC key when the device displays the software version. You have 2 seconds to do this. 1. On the Setup Menu, make sure INFO is highlighted, then press the OK key. SETUP MENU Info Sync with Moneris ECR COM Language 2. On the INFO menu, select each menu item (Merchant ID, ECR ID…) and press the OK key on the UX 100 keypad to view the information. INF ...

2 1 Introduction Use this guide to understand how your UX 301 unattended solution works, including:  The various hardware components  How the hardware components are connected;  How to set up communication with your electronic cash register (ECR)  How to sync the device with Moneris; and  How to check your account settings (merchant ID, ECR ID, PED ID and others)  Common error messages and solutions  How to get help Important: Consult your integration provider to understand their support process before making any ...

7 2.3.3 Connect the Power Supply Connect the power cable to the power port on the UX301 and connect the other end to a power source, as shown in the following illustration. Use the power cable provided. Note: The Moneris power cable has a 4-pin connector. 2.3.4 Connect UX301 to the PC / ECR Connect the UX 301 to your PC / ECR using an RS232 Serial cable, USB cable, or LAN cable. ...

12 2.8 Validating account information You can view account information on the Setup menu. To access the Setup menu, you can restart the application (page 13). During start up, press the FUNC key when the device displays the software version. You have 2 seconds to do this. 1. On the Setup Menu, make sure INFO is highlighted, then press the OK key. SETUP MENU Info Sync with Moneris ECR COM Language 2. On the INFO menu, select each menu item (Merchant ID, ECR ID…) and press the OK key on the UX 100 keypad to view the information. INF ...