DSC PowerSeries PC1616 Operation & User’s Manual

Text of DSC PowerSeries PC1616 Operation & User’s Manual

WARNING: This manual contains information on limitations regarding product use and function and

information on the limitations as to liability of the manufacturer. The entire manual should be carefully read. PC1616/PC1832/PC1864 User Manual

FCC COMPLIANCE STATEMENT

CAUTION: Changes or modifications not expressly approved by Digital Security Con- trols could void your authority to use this equipment. This equipment has been tested and found to comply with the limits for a Class B digital de- vice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer-ence in a residential installation. This equipment gener- ates, uses and can

PowerSeries System Keypads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

PC5532Z 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Keypad Display Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Erasing an Access Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

User Function Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Changing LCD Display Brightness/Contrast. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Changing the Buzz

DSC PowerSeries PC1616 PowerSeries System Keypads

Function Lights Zone Lights Status Lights Function Buttons Emergency Keys [ PC5532Z Your installer may have installed one of these LED keypads if you have 16 or fewer zones on your sys- tem. These keypads operate in the same way as the PC5532 keypad. PC5508Z PC5516Z Status Lights Number Pad Function Buttons Liquid Crystal Display (LCD) Arrow (Scroll) Keys Emergency Keys LCD5501Z LCD5500Z

2 1 2 3 4 5 6 7 8 0 * # 9 Stay Away Chime Reset Bypass PK5508/PK5516 (shown) PK5500/PK5501 Status Lights Number Pad Emergency Keys Zone Lights [ PC1555RKZ LCD5511 Display System Lights Number Pad LED5511

Keypad Display Symbols

1 Clock Digits 1, 2 – These two 7 segment clock digits indicate the hour digits when the local clock is active, and identify the zone when the OPEN or ALARM icons are active. These two digits scroll one zone per second from the lowest zone number to the highest when scrolling through zones. 2 : (Colon) – This icon is the hours/minutes divider and will flash once a second when the local clock is active. 3 Clock Digits 3, 4 – T

Fill out the following information for future reference and store this guide in a safe place.

Access Codes Master Code [40] : _________________________ System Information Enabled? J [F] FIRE J [A] AUXILIARY J[P] PANIC Code Access Code Code Access Code Code Access Code Code Access Code 01 10 19 28 02 11 20 29 03 12 21 30 04 13 22 31 05 14 23 32 06 15 24 33 (Duress) 07 16 25 34 (Duress) 08 17 26 09 18 27 The Entry Delay Time is _______ se

Sensor / Zone Information

Sensor Protected Area Sensor Type Sensor Protected Area Sensor Type 01 33 02 34 03 35 04 36 05 37 06 38 07 39 08 40 09 41 10 42 11 43 12 44 13 45 14 46 15 47 16 48 17 49 18 50 19 51 20 52 21 53 22 54 23 55 24 56 25 57 26 58 27 59 28 60 29 61 30 62 31 63 32 64

DSC PowerSeries PC1616 About Your Security System

Your DSC Security System has been designed to provide you with the greatest possible flexibility and conve- nience. Read this manual carefully and have your installer instruct you on your system's operation and on which features have been implemented in your system. All users of this system should be equally instructed in its use. Fill out the “System Information” page with all of your zone information and access codes and

The security system has several zones of area protection and each of these zones will be connected to one or

more sensors (motion detectors, glassbreak detectors, door contacts, etc.). A sensor in alarm will be indicated by the corresponding zone lights flashing on a LED keypad or by written messages on the LCD keypad. Additional features of the PC1616/PC1832/PC1864 Security System are an Automatic Inhibit (Swinger Shutdown) for Alarm, Tamper and Trouble

DSC PowerSeries PC1616 An error tone will sound if the system is unable to arm. This will happen if the system is not ready to arm (i.e. sen-

sors are open), or if an incorrect user code has been entered. If this happens, ensure all sensors are secure, press and try again. Disarming (Turning Off /Unsetting) Enter your access code to disarm anytime the system is armed (i.e. Armed ( ) indicator is on). The keypad will beep if you walk through the entry door. Ente

When Alarm Sounds

The system can generate 2 different alarm sounds: Continuous Siren = Intrusion (Burglary Alarm) Temporal / Pulsed Siren = Fire Alarm Intrusion (Burglar) Alarm Continuous Siren If you are unsure of the source of the alarm approach with caution ! If the alarm was accidental, enter your Access Code to silence the alarm. Call your central station to avoid a dispatch. Fire Alarm Pulsed Siren Follow your emergency evacuation plan immediately

4. To unbypass a zone, enter the two-digit number of the zone(s) to be bypassed (01-64). You can also use the

keys to find the zone, and then press to select the zone. The “B” will disappear from the dis- play to show that the zone is no longer bypassed. 5. To exit bypassing mode and return to the Ready state, press . Bypassing Zones with a PC55XXZ or LCD5501Z keypad Start with disarming the system 1. Press , then your [access code] (if require

When a trouble condition is detected, the Trouble ( ) or System indicator will turn on, and the keypad will beep

every 10 seconds. Press the key to silence the beeps. Press to view the trouble condition. The Trouble ( ) or System indicator will flash. The corresponding trouble will be represented by numbers 1-8. Trouble Menu Acknowledgement If the Arming Inhibit for All Troubles features is enabled, Trouble Menu Acknowledgement may

For systems using multiple partitions/areas, access codes can be assigned to specific or multiple partitions/areas.

Please contact your alarm company for details. The minimum number of variations of access codes (key) is 27027 when 37, 6-digit user codes are used. For SIA Installations, duplicate or duress codes derived from user codes +/- 1 digit are not allowed. The access codes have programmable attributes which allow zone bypassing, remote access us

Bell Squawk Attribute

This attribute is used to determine whether an access code should generate an arming/disarming Bell Squawk upon entry of the code for Away arming. The Wireless Keys with access codes associated with them may gener- ate Arming/Disarming Bell squawks. If desired, this option may be used with codes that are manually entered. Please contact your installer to have this programmed. NOTE: The Master Code cannot use the Bell Squawk attrib

DSC PowerSeries PC1616 [2] Auto-arm Control

Pressing [2] while in the User Function menu will enable (3 beeps) or disable (one long beep) the Auto-arm fea- ture, by partition. With this feature enabled, the panel will automatically arm in the Away mode (Stay Away zones active) at the same time each day. The auto-arm time is programmed with the [,][6][Master Code][3] command. [3] Auto-arm Time The system can be programmed to arm at a programmed time each day, per partition.

DSC Other Owners Instructions: