WANHAO D9 Manual
Read Online
Read the WANHAO D9 Manual online using the built-in PDF viewer.
Text of the manual
How to connect your Wanhao D9 printer to wifi
For help and support, contact [email protected]
© 2019 Me3d Pty LTD
1. Sign in > 2. Download Wifi Setup > 3. Select Printer > 4. Additional Steps
Overview
Connecting your Wanaho D9 to wifi is a matter of downloading
your wifi setup into your BuildBee CloudDock.
You will need:
-
BuildBee account
-
BuildBee CloudDock
-
USB stick *
* the support team has found that USB sticks with name brands
have better results.
Step 1. Sign Into BuildBee
1.
Navigate to https://buildbee.com and click the ‘Sign In’
button.
2.
Sign in using your BuildBee account.
*
How to connect your Wanhao D9 printer to wifi
For help and support, contact [email protected]
© 2019 Me3d Pty LTD
Step 2. Download Wifi Setup
You will need a name-brand USB stick to complete this step.
1.
Click on configure printer in the top bar, or directly visit
https://buildbee.com/setup
2.
Follow the video instructions below for choosing the best wifi
settings for your network.
1. Sign in > 2. Download Wifi Setup > 3. Select Printer > 4. Additional Steps
Configure Printer Video Instructions:
https://youtu.be/oHZUoNQw8-E
How to connect your Wanhao D9 printer to wifi
For help and support, contact [email protected]
© 2019 Me3d Pty LTD
1. Sign in > 2. Download Wifi Setup > 3. Select printer > 4. Additional Steps
Step 3. Specify your printer type
1.
Click on printers in the top bar, or directly visit
https://buildbee.com/printers
2.
Click on the Maintenance button next to the newly
configured device
3.
Click the System Info tab button
4.
Select Wanhao as the manufacturer
5.
Select D9 as the model
Return to https://buildbee.com/printers. The BuildBee Cloud
Dock will reboot. After a few minutes the device should become
READY.
How to connect your Wanhao D9 printer to wifi
For help and support, contact [email protected]
© 2019 Me3d Pty LTD
1. Sign in > 2. Download Wifi Setup > 3. Select Printer > 4. Additional Steps
Printer Setup
If this is the first time you have used your Wanhao D9 ensure that
you follow the printer setup instructions provided with your
machine.
We recommend following the instructions for performing the
AUTO LEVEL function.
Z Offset Calibration
If this is the first time you have used your Wanhao D9 you will need
to calibrate the Z-Offset for your printers nozzle.
We recommend following the instructions provided by the
manufacturer: https://www.youtube.com/watch?v=O7sx8dHYxk8
