SEB Digipass 260 User Instructions

Activate the code calculator pressing the button with the triangle on it. After entering your PIN, APPLI appears on the screen. To enter the internet bank, press 1. Now the code calculator shows a code, which must be entered in internet bank. The code is displayed on the screen for 90 seconds, after which the code calculator will switch off. If you would like to switch off the code calculator earlier, press the button with the triangle on it twice. To confirm a payment in the internet bank, press 2. When confirming a payment or contract, internet bank will show an access code, which must be entered into the code calculator (5 or 6 digits depending on the calculator type). After entering the access code, the confirmation code of transaction appears on the screen of code calculator, which must be entered in internet bank (5 or 6 digits depending on the calculator type). Starting to use code calculator Activating code calculator To activate the code calculator, press the button with the triangle on it. If when you turn on the code calculator you see the PIN enter 11111. If when you turn on the code calculator you see the NEW PIN, continue to the next step. The image to the right will be displayed on the screen. Enter the code. If the entered code is too simple (e.g. 11111, 12345, 99999), a message “not SAFE” will be displayed on the screen and you will have to start code generation once more. The image to the right will be displayed on the screen. Re-enter the new code. If the entered codes match, you will see on the screen “NEW PIN CONF”. Use your new code next time when activating the code calculator. If the entered codes do not match, a message “FAIL” is displayed and you will have to start again. After changing the code, APPLI appears on the screen. Sample Sample Sample Sample Sample

Activate code calculator, enter valid PIN and if APPLI – (as shown on the image to the right) appears on the screen, press the button with the triangle on it and hold it down for two seconds. The image to the right will be displayed on the screen. Enter a new code. If the entered code is too simple (e.g. 11111, 12345, 99999), a message “not SAFE” will be displayed on the screen and you will have to start code generation once more. The image to the right will be displayed on the screen. Re-enter the new code. If the entered codes match, you will see on the screen “NEW PIN CONF”. Use your new code next time when activating the code calculator. If the entered codes do not match, a message “FAIL” is displayed and you will have to start again. If you entered an incorrect code when activating your code calculator, the message to the right is displayed. The number on the screens shows how many times you have entered an incorrect code. The message is shown until you have entered the correct code. You can delete the message and enter a new code by pressing the button with the triangle on it. If you have entered an incorrect code for five times, the code calculator will be locked and you will have to visit SEB branch in order to get a new code calculator. Changing your code calculator You cannot change the empty batteries of your code calculator. Opening the code calculator makes it unusable. You can get a new code calculator from our branch for a fee according to bank’s price list. When you come to our branch, bring your old code calculator and an identity document. Changing the code of the code calculator Entering an incorrect code