Phytec LCD-014 Hardware Manual

Display Adapter LCD-014 / 017 Hardware Manual Document No.: L-758e_1 Add-on Prod. No.: LCD-014 Add-on PCB. No.: 1337.1 Add-on Prod. No.: LCD-017 Add-on PCB. No.: 1344.0 First Edition ...

© PHYTEC Messtechnik GmbH 2011 L-758e_1 In this manual are descriptions for copyrighted products that are not explicitly indicated as such. The absence of the trademark (™) and copyright (©) symbols does not imply that a product is not protected. Additionally, registered patents and trademarks are similarly not e ...

i List of Figures...............................................................................................ii List of Tables................................................................................................ii Conventions, Abbreviations and Acronyms....................................... ...

ii © PHYTEC Messtechnik GmbH 2011 L-758e_1 List of Figures Figure 1: Modular Concept of the PHYTEC phyCARD Development Kit family................................................................................... 2 Figure 2: Component side of LDC-014-x ................................................. 4 Figure 3: Co ...

© PHYTEC Messtechnik GmbH 2011 L-758e_1 iii Conventions, Abbreviations and Acronyms This hardware manual describes the LCD-014-M / LCD-017-xxx PHYTEC Display Adapter. The manual specifies the adapter boards design and function. Precise specifications for the display mounted can be found in the Data Sheet/User's Ma ...

iv © PHYTEC Messtechnik GmbH 2011 L-758e_1 Abbreviation Definition CB Carrier Board; used in reference to the PHYTEC Development Kit Carrier Board. EMI Electromagnetic Interference. GPI General purpose input. GPIO General purpose input and output. GPO General purpose output. J Solder jumper; these types of jumpers r ...

v Preface As a member of PHYTEC's new Add-on product family the LCD-014-M / LCD-017-xxx PHYTEC Display Adapter is one of a series of boards that provide additional functions and interfaces to the standard PHYTEC Carrier Boards. Primarily designed for PHYTEC’s new phyCARD Rapid Development Kit family, due ...

vi © PHYTEC Messtechnik GmbH 2011 L-758e_1 Ordering Information LCD-014 is available with the ordering number LCD-014-M and has a 5" VGA display. The part numbering of the model LCD-017 has the following structure: LCD-017-xxxx Display Size / Resolution 035V = 3.5" VGA 050V = 5" VGA 070W = 7" WVGA 104S ...

vii The support section of our web site provides product specific information, such as errata sheets, application notes, FAQs, etc. http://www.phytec.eu/europe/support/faq Declaration of Electro Magnetic Conformity of the PHYTEC Display Adapter LCD-014 / LCD-017 PHYTEC Single Board Computers and Add-on Boa ...