SEA SURF 350 Reversible Manual 

To release the operator proceed as follows: 1) Turn counter-clockwise the lock protection cover (Fig. 50) 2) Insert the key and turn of about 90° clockwise (Fig. 51) 3) Turn the handle counter-clockwise to release the operator (Fig. 52) To lock the operator proceed as follows: 1) Turn the handle clockwise to revert it to the initial position 2) Turn the key about 90° counter- clockwise (Fig. 53) 3) After having relocked the operator, close the lock protection cover to prevent damages due to atmospheric agents NOTE: for a proper operation of the manual rel ...

10850 N.W. 21st - unit 160 - DORAL - MIAMI Florida (FL) 33172 Phone: ++1-305.594.1151 Toll Free: 800.689.4716 www.sea-usa.com [email protected] ...

A - The gate is rigid and straight and runs smoothly throughout its travel B - The length of each leaf must comply with max. length indicated on technical specifications of the model C - The weight of each leaf must comply with max. weight indicated on technical specifications of the model D - The hinges are hardly anchored and are able to support the torque of the operator; they do not have irregular movements and/or any friction during the whole movement of the leaf. - SEA operators have been designed for the automation of ...

10850 N.W. 21st - unit 160 - DORAL - MIAMI Florida (FL) 33172 Phone: ++1-305.594.1151 Toll Free: 800.689.4716 www.sea-usa.com [email protected] ...

A - The gate is rigid and straight and runs smoothly throughout its travel B - The length of each leaf must comply with max. length indicated on technical specifications of the model C - The weight of each leaf must comply with max. weight indicated on technical specifications of the model D - The hinges are hardly anchored and are able to support the torque of the operator; they do not have irregular movements and/or any friction during the whole movement of the leaf. - SEA operators have been designed for the automation of ...

the opening and closing directions is in accordance with the requirement; however, a single device is not required to cover both directions. Tice installer is required to install entrapment protection devices in each entrapment zone 2. FOR VERITICAL BARRIERS ONLY: Barrier gate operators (arm) that is not intended to move toward a rigid objact closer than 16 inches (406 mm) are not required to be provided with a means of entrapment protection * B1 and B2 means of ent ...

dangerous. The installer must take a thorough risk examination to prevent crushing, conveying, cutting, grappling, trapping so as to guarantee a safe installation for people, things and animals; (Re. Laws in force in the country where the installation has been made. NOTICE: SEA USA Inc. can not be deemed responsible for any damage or accident caused by product breaking, being damages or accidents due to a failure to comply with the instructions herein. The guarantee will be avoid and the manufacturer responsibility will be n ...

Manual release Covering lid for terminal board Hooking pin USING GRAPHICS 16 feet Weight 12 feet 15 feet 40 Fig. 5 20 50 SURF 350 (24V) SURF 350 (24V) SURF 350 (120V) SURF 350 (120V) SURF 450 (24V) SURF 450 (24V) MAX LEAF LENGTH CYCLES/HOUR 13 feet SURF K (24V) SURF K (24V) 16 ft 1200 Lb Leaf length 900 Lb 600 Lb 15 ft 9 ft 12 ft 1100 Lb 400 Lb 5 ft SURF 350 (24V) 13 ft 1000 Lb SURF 350 (120V) SURF 450 (24V) - SURF 450 H BR (36V) SURF K (24V) - SURF K BR (36V) Fig. 6 45 SURF 450 BR (36V) SURF K BR (36V) SURF 450 BR (36V) SURF K BR (36V) Co ...